Omron IntelliSense HEM-907 Bedienungsanleitung

INSTRUCTION MANUAL

OMRON

Digital Automatic Blood Pressure Monitor

Model

HEM-907

Thank you very much for purchasing the

OMRON Digital Automatic Blood Pressure

Monitor.

Requests from OMRON to the

operators and the persons

responsible for maintenance

Please read thoroughly the "Notes on

Safety" of this Instruction Manual before

using this unit so that you can use it safely

and correctly after sufficient understanding.

After reading this Instruction Manual, please

keep it near the unit all the times for future

reference.

The managerial responsibility of using and

maintaining the medical electronic instrument

must be borne by the users including hospi-

tals and clinics.

Do not let anyone use this unit other than the

doctors or the legally qualified persons.

Furthermore, only the skilled persons can

use this unit.

HIDE

P-SET

100

AUTO

140 18 0

220

260

280

MODE

AVG. MANU.

CHECK

SINGLE

ON/OFF

START

STOP

mmHg

SYS

mmHg

DIA

BPM

PULSE

ART.

INDEX

MAX

Table of Contents

Exemptions ...................................................2

Names and Functions of the Parts ...............3

Notes on Safety ............................................7

Components of the Product........................11

Options........................................................11

How to Apply the Arm Cuff .........................12

How to Use the Power Source

(AC Adapter) ...........................................13

How to Measure Blood Pressure................14

SINGLE Mode.........................................15

AVG. Mode..............................................16

MANU. Mode...........................................17

CHECK Mode .........................................18

Installation and Replacement of

Battery Pack............................................19

How to Clean the Unit after Use.................20

List of Error Codes......................................21

Troubleshooting...........................................22

Specifications..............................................23

13AQ58 OPM UK hem-907 24-10-2006 07:43 Pagina 1

Exemptions

OMRON will not bear any responsibilities on the following matters.

1. When a problem or damage occurs caused by the maintenance and/or repair con-

ducted by a person other than OMRON or the dealer specified by OMRON

2. The problem or damage of OMRON product caused by the product of other man-

ufacturer not delivered by OMRON

3. The problem and damage caused by the maintenance and/or repair using the

repair parts not specified by OMRON

4. The problem and damage caused by the results not observing the Notes on

Safety or the operational method mentioned in this Instruction Manual

5. Under the circumstances not within the operating conditions of this unit including

the power source or the setting environment mentioned in this Instruction Manual

6. The problem and damage caused by the result(s) of remodeling or improper

repair of this product

7. The problem and damage caused by act of god such as fire, earthquake, flood, or

lightening

1. The contents of this Instruction Manual may be changed without prior notice.

2. We have thoroughly reviewed the contents of this Instruction Manual.

However, if an inadequate description or error is found, please let us know.

3. It is prohibited to copy a part of or the entire Instruction Manual without getting

OMRON's permission. Unless this Instruction Manual is used by an individual

(company), it cannot be used without getting OMRON's permission from the

standpoint of the Copyright Law.

13AQ58 OPM UK hem-907 24-10-2006 07:43 Pagina 2

Names and Functions of the Parts

Main unit

HIDE

P-SET

100

AUTO

140 180

220

260

280

MODE

AVG. MANU.

CHECK

SINGLE

ON/OFF

START

STOP

mmHg

SYS

mmHg

DIA

BPM

PULSE

DC8V

1. LCD display

2. HIDE (non-display) Button

3. DC jack

4. P-SET (pressure

setting) Volume

5. MODE Selector

6. ON/OFF (power)

Button

7. START Button

8. DEFLATION

(deflation control)

Button

9. Arm Cuff Connector

10. STOP Button

13AQ58 OPM UK hem-907 24-10-2006 07:43 Pagina 3

Names and Functions of the Parts

Display

HIDE

BPM

mmHg

PULSE

SYS

mmHg

DIA

Systolic blood

pressure

Diastolic blood

pressure

Pulse rate

Contents when the AVG.

Mode is selected

AVG. : Mean value

1st : First measurement

2nd : Second measurement

3rd : Third measurement

Ready to Measure

Pulse level / Number of

irregular pulse waves

Number of irregular pulse waves:

The pulse wave having a difference of

more than ±25% from the average

interval of pulse waves is determined

as irregular. Number of irregular pulse

waves are displayed up to three times.

Battery level

Displays for the usable level.

Displays

for the low level.

Displays for the unusable level.

Charging

Displays when the battery

pack is being charged.

External power source

Displays AC when the unit is

connected to the AC adapter.

Example of display

No. of arrhythmias

123

13AQ58 OPM UK hem-907 24-10-2006 07:43 Pagina 4

Explanation of Functions

(1) Pressure setting function

Inflation can be set by AUTO (automatic setting) or the target value.

AUTO (automatic setting): In the SINGLE (single measurement), AVG. (average), and MANU. (auscultation) Modes, the

monitor estimates the systolic blood pressure value during inflation and automatically inflates to the proper value.

Target value setting: The monitor inflates to the target value. Pressure value is set to 30 to 40 mmHg above the expected

systolic pressure.

(2) Non-display function

A function not to display the results of measured blood pressures.

However, the pressure values during the measurement are displayed.

This function can be used when SINGLE (single measurement) or AVG.

(average) Mode is selected.

(3) Manual deflation control function

A function to accelerate the deflation speed by pushing a

DEFLATION Button during deflation.

This function can be used when MANU. (auscultation) Mode

is selected.

Names and Functions of the Parts

ON/OFF

START

STOP

HIDE

P-SET

100

AUTO

140 18 0

220

260

280

MODE

AVG. MANU.

CHECK

SINGLE

ON/OFF

START

STOP

HIDE

P-SET

100

AUTO

140 18 0

220

260

280

MODE

AVG. MANU.

CHECK

SINGLE

P-SET

HIDE

13AQ58 OPM UK hem-907 24-10-2006 07:43 Pagina 5

Names and Functions of the Parts

(4) Setting mode change function

You can set the number of times to measure, the waiting time until the start of measurement, and the interval between

measurements.

Items to set Set value

F1 Number of measurements 2 times, 3 times

F2 Waiting time until the start of measurement 0 sec, 3 min, 5 min, 10 min.

F3 Measurement interval time 5 sec, 30 sec, 1 min, 2 min, 3 min.

ON/OFF

START

STOP

HIDE

P-SET

100

AUTO

140 18 0

220

260

280

MODE

AVG. MANU.

CHECK

SINGLE

Procedure to change the set values

1) When the power is off, press the ON/OFF Button for more than three

seconds while holding the START Button and change the mode to the

Setting Change Mode.

2) Press the START Button to select the item from F1 to F3.

3) Press the DEFLATION Button to change the set values.

List of Functions for each Mode

Pressure setting

function

Non-display

function

Manual deflation

control function

Setting mode

change function

Single measure-

ment (SINGLE) Average

(AVG.) Auscultation

(MANU.) Check

(CHECK)

Function

Measurement

Mode

13AQ58 OPM UK hem-907 24-10-2006 07:43 Pagina 6

Notes on Safety

• The warning signs and the sample icons shown here are listed for you to use the product safely and correctly as well as

to prevent the risk and the damage to you and others from happening.

• The icons and meanings are as follow.

Warning sign Contents

Indicates matters in which death or sever bodily damage may arise as a result of incorrect

handling.

Indicates matters in which bodily harm or material damage* may arise as a result of incorrect

handling.

* Material damage refers to a wide range of damage involving your house, household goods, domestic animals, and pets.

Warning

Caution

Examples of signs

The icon indicates caution (including warning and danger). Matters involving actual caution are indi-

cated by text or pictures in or near . The left icon refers to "caution for ignition".

The icon indicates prohibitions (what you cannot do). Matters involving actual prohibitions are indi-

cated by text or pictures in or near . The left icon refers to "prohibition to disassemble".

The icon indicates something that is compulsory (always follow).

Matters involving actual compulsory

actions are indicated by text or pictures in or near .

The left icon refers to "pulling the power source plug".

Warning

Do not wrap the arm cuff over the arm to which intravenous injection or transfusion is being conducted.

• Intravenous injection or transfusion is impossible.

If any abnormal matter occurs during the measurement such as inflation does not stop, remove the arm

cuff or pull out the air tube from the main unit.

• You may suffer peripheral neuropathy.

Do not use the unit in the place where inflammable gas, such as highly inflammable anesthetic, may be

generated or in a high pressure oxygen room or an oxygen tent.

• It may cause ignition and explosion.

Do not touch the AC adapter with wet hands.

• You may suffer electric shock.

13AQ58 OPM UK hem-907 24-10-2006 07:43 Pagina 7

Notes on Safety

When you are not going to use the unit for a long period of time, be sure to remove the AC adapter

from the electric outlet.

• You may suffer electric shock, or electric leak or fire may arise because of deteriorated insulation.

Be sure to remove the AC adapter from the electric outlet when installing, removing, or cleaning the

part.

• You may suffer electric shock or injure yourself.

Pull the AC adapter from the electric outlet when cleaning the unit.

• You may suffer electric shock.

In the following case, confirm the measurement with the stethoscope.

(1) When an irregular pulse wave is displayed

· An error may be displayed when an external vibration is applied or the patient moves his/her body.

(2) When an error is generated or the measured value is doubtful

· An error may be displayed when an external vibration is applied or the patient moves his/her body.

· An error may be generated in the measured value or the blood pressure may not be able to measure for the patient

having peripheral circulatory disturbance or extreme hypotension.

· An error may be generated in the measured value or the blood pressure may not be able to measure for the patient

having short variation of blood pressure such as arrhythmia.

After cleaning the unit, dry it well, then insert the AC adapter to the electric outlet.

• You may suffer electric shock.

Insert the AC adapter to the electric outlet as far as it goes.

Wipe off the dust on the AC adapter.

• You may suffer electric shock, or there may be short circuit or fire ignition.

If you find any trouble with this unit, immediately stop using it, turn off the power, pull out the AC

adapter from the electric outlet, then contact the repair department.

• You may suffer electric shock, or there may be short circuit or fire ignition.

Do not disassemble or remodel the unit.

• You may suffer electric shock, or there may be short circuit or fire ignition.

Do not use the unit to the patient using a pump oxygenator.

• The unit can not measure correctly. The unit cannot measure when it cannot detect any beat.

Do not use the AC adapter and the battery pack not specified for this unit.

• It may cause fire or electric shock.

Do not use a portable phone near the unit.

• The unit may malfunction.

Do not install the parts and/or instrument not specified for this unit.

• It may cause damage to the unit.

Do not use the damaged power cord or AC adapter, or loose electric outlet.

• You may suffer electric shock, or there may be short circuit or fire ignition.

Do not damage the power cord of the AC adapter by placing heavy thing on it or pinching it, or modify,

forcibly bend, pull, twist, or bundle it.

• You may suffer electric shock or there may be electric leak and fire because of deteriorated insulation.

Caution

13AQ58 OPM UK hem-907 24-10-2006 07:43 Pagina 8

Notes on Safety

Caution

Be sure to use the power supply of 230 VAC.

• It may cause fire or electric shock.

Do not share an electric outlet with other unit or electric appliance.

• It may cause fire or electric leak.

Do not pull the power cord when pulling out the AC adapter from the electric outlet.

• The power cord will be disconnected or shorted and may cause fire or electric shock.

Do not install or store the unit where it may be sprayed with water or medication.

• You may suffer electric shock.

Requests from OMRON

• Do not place or put anything on the unit.

• Do not apply strong shock to or drop the unit.

• When you move the unit, be sure to turn off the power and remove the connected AC adapter.

• When using this unit concurrently with other unit, be sure to read the Instruction Manual of the other unit to be used

concurrently and understand the warnings and cautions before use.

• Be sure to confirm that all cords and tubes are connected correctly and completely before use.

• Inspect the Buttons and so on to confirm that the unit operates normally before use.

• When using a battery pack, be sure to confirm that the voltage is sufficient before use.If you are not going to use the

unit for a long period of time, remove the battery pack.

• Do not inflate the arm cuff without being wrapped over the arm.

• Do not use a damaged arm cuff.

• Do not use the unit in a vehicle.

• Be sure to monitor all the time that the unit and the patient are not abnormal.

• Please keep the unit out of the reach of patient.

• Clean and store the unit and accessories after each use.

• Do not clean the unit with gasoline, thinner, or high concentration alcohol.

• Do not disinfect the unit by autoclave or gas sterilization (EOG, formaldehyde, or high concentration ozone.)

• Do not store the unit in the following places.

· Under the direct sunshine

· Dusty or salty environment

· Places which slope, vibrate, and/or are prone to shocks

· Storage of chemicals or where gas may be generated

· Under high temperature and high humidity

13AQ58 OPM UK hem-907 24-10-2006 07:43 Pagina 9

Maintenance

1. Be sure to inspect the unit on regular basis. Check accuracy on a 1 year interval.

2. If the unit has not been used for a while, be sure to confirm that the unit operates normally and safely before use

Durability

The durability of this unit is five years. (Arm cuff is a consumable.)

Measures to take at the time of trouble or accident

If a device error (Er9) occurs, take the following procedure promptly.

1. Remove the arm cuff from the patient's arm.

2. Turn off the power and pull the AC adapter from the electric outlet. If an optional battery pack is used, remove it also.

3. Display "Trouble" on the unit so that it cannot be used.

4. Contact the dealer where you purchased the unit or the nearest OMRON dealer

Notes on Safety

13AQ58 OPM UK hem-907 24-10-2006 07:43 Pagina 10

Andere Handbücher für IntelliSense HEM-907

Inhaltsverzeichnis

Andere Omron Blutdruckmessgerät Handbücher

Omron

Omron S1 Bedienungsanleitung

Omron

Omron HEM-18 Bedienungsanleitung

Omron

Omron BP7350CAN Bedienungsanleitung

Omron

Omron RS8 Bedienungsanleitung

Omron

Omron IntelliSense HEM-907 Bedienungsanleitung

Omron

Omron Intellisense BP785 Bedienungsanleitung

Omron

Omron M6 Comfort Bedienungsanleitung

Omron

Omron M6 Comfort Bedienungsanleitung

Omron

Omron M3 Comfort Bedienungsanleitung

Omron

Omron BP5100 Bedienungsanleitung

Omron

Omron IntelliSense HEM-650 Bedienungsanleitung

Omron

Omron M7 Intelli IT Bedienungsanleitung

Omron

Omron HEM-737 Bedienungsanleitung

Omron

Omron M2 Compact Bedienungsanleitung

Omron

Omron BP742 Bedienungsanleitung

Omron

Omron M7 Intelli IT Bedienungsanleitung

Omron

Omron RS6 Bedienungsanleitung

Omron

Omron M6W Bedienungsanleitung

Omron

Omron M3 Intellisense Bedienungsanleitung

Omron

Omron HBP-1120 Bedienungsanleitung

Omron

Omron M2 Compact Gebrauchsanweisung

Omron

Omron R5 Prestige Bedienungsanleitung

Omron

Omron M4-I Bedienungsanleitung

Omron

Omron HEM-4030 Bedienungsanleitung

Beliebte Blutdruckmessgerät Handbücher anderer Marken

Little Doctor

Little Doctor LD7 Bedienungsanleitung

Microlife

Microlife WatchBP Office Targe Bedienungsanleitung

Mx Onda

Mx Onda MX-CP2395 Bedienungsanleitung

Braun

Braun VitalScan 1 Bedienungsanleitung

Little Doctor

Little Doctor LD-91 Bedienungsanleitung

Sanitas

Sanitas SBM 09 Bedienungsanleitung

A&D

A&D LifeSource UB-328 Bedienungsanleitung

König Electronic

König Electronic HC-BLDPRESS200 Bedienerhandbuch

Leicke

Leicke Sharon Bedienungsanleitung

3B SCIENTIFIC

3B SCIENTIFIC U11395 Bedienungsanleitung

Soehnle

Soehnle SYSTO MONITOR 100 Bedienungsanleitung

Nasco Healthcare

Nasco Healthcare Simulaids Life/form LF01095U Referenzhandbuch

Microlife

Microlife WatchBP office Bedienungsanleitung

HoMedics

HoMedics MiBody 360 Bedienungsanleitung

ForaCare

ForaCare FORA P30 Plus Bedienungsanleitung

JOYTECH

JOYTECH DBP-6296B Bedienungsanleitung

visomat

visomat double comfort Bedienungsanleitung

Spacelabs Healthcare

Spacelabs Healthcare 90217A Bedienungsanleitung