4CP2E CPU Unit Hardware User’s Manual(W613)
Section 10 Interrupts This section describes the interrupts that can be used with CP2E PLCs,
including input interrupts and scheduled interrupts.
Section 11 High-speed Counters This section describes the high-speed counter inputs, high-speed
counter interrupts, and the frequency measurement function.
Section 12 Pulse Outputs This section describes positioning functions such as trapezoidal control,
jogging, and origin searches.
Section 13 PWM Outputs This section describes the variable-duty-factor pulse (PWM) outputs.
Section 14 Serial Communications This section describes communications with Programmable Terminals
(PTs) without using communications programming, no-protocol commu-
nications with general components, and connections with a Modbus-
RTU Easy Master, Serial PLC Link, host computer and Modbus-RTU
Slave.
Section 15 Built-in Ethernet This section gives an outline of the built-in Ethernet function, explains its
specification and how to make the settings required for operation.
Section 16 Other Functions This section describes PID temperature control, clock functions, DM
backup functions, security functions.
Section 17 Analog Option Board This section describes an overview of the Analog Option Board,
describes its installation and setting methods, memory allocations, star-
tup operation, refresh time, troubleshooting and how to use the Analog
Option Board.
Section 18 Operating the Program-
ming Device
This section describes basic functions of the CX-Programmer, such as
using the CX-Programmer to write ladder programs to control the CP2E
CPU Unit, to transfer the programs to the CP2E CPU Unit, and to debug
the programs.
Appendices The appendices provide lists of programming instructions, the Auxiliary
Area, cycle time response performance, PLC performance at power
interruption, memory map and Ethernet functions.
CP1E/CP2E CPU Unit Instructions Reference Manual (Cat. No. W483)
Section Contents
Section 1 Summary of Instructions This section provides a summary of instructions used with a
CP1E/CP2E CPU Unit.
Section 2 Instruction This section describes the functions, operands and sample programs of
the instructions that are supported by a CP1E/CP2E CPU Unit.
Section 3 Instruction Execution
Times and Number of Steps
This section provides the execution times for all instructions used with a
CP1E/CP2E CPU Unit.
Section 4 Monitoring and Comput-
ing the Cycle Time
This section describes how to monitor and calculate the cycle time of a
CP1E/CP2E CPU Unit that can be used in the programs.
Appendices The appendices provide a list of instructions by Mnemonic and ASCII
code table for the CP1E/CP2E CPU Unit.
Section Contents
