Omron CJ2 Series Bedienungsanleitung

Machine Automation Controller NJ-series

EtherNet/IPTM

Connection Guide

OMRON Corporation

CJ2-series Controller

P568-E1-01

About Intellectual Property Rights and Trademarks

Microsoft product screen shots reprinted with permission from Microsoft Corporation.

Windows is a registered trademark of Microsoft Corporation in the USA and other countries.

ODVA and EtherNet/IPTM are trademarks of ODVA.

EtherCAT®is registered trademark and patented technology, licensed by Beckhoff Automation

GmbH, Germany.

Sysmac is a trademark or registered trademark of OMRON Corporation in Japan and other

countries for OMRON factory automation products.

Company names and product names in this document are the trademarks or registered

trademarks of their respective companies.

Table of Contents

1. Related Manuals........................................................................................ 1

2. Terms and Definitions............................................................................... 2

3. Precautions................................................................................................ 3

4. Overview .................................................................................................... 4

5. Applicable Devices and Device Configuration ....................................... 5

5.1. Applicable Devices............................................................................. 5

5.2. Device Configuration.......................................................................... 6

6. EtherNet/IP Settings.................................................................................. 8

6.1. EtherNet/IP Communications Parameters ......................................... 8

6.2. Allocating the Tag Data Links............................................................. 8

7. EtherNet/IP Connection Procedure.......................................................... 9

7.1. Work Flow........................................................................................ 10

7.2. Setting Up the PLC ...........................................................................11

7.3. Setting Up the Controller.................................................................. 21

7.4. Setting Up the Network.................................................................... 28

7.5. Checking the EtherNet/IP Communications..................................... 32

8. Initialization Method................................................................................ 38

8.1. Initializing the Controller................................................................... 38

8.2. Initializing the PLC ........................................................................... 41

9. Appendix 1 Detailed Settings of the Tag Data Links ............................ 43

9.1. Global Variable Table....................................................................... 43

9.2. Relationship between Destination Device and Global Variables...... 43

9.3. Associating the Tag Data Links........................................................ 44

10. Appendix 2 Setting the Tag Data Links Using the Software............. 45

10.1. Overview of Setting Tag Data Links ................................................. 45

10.2. Work Flow of "Procedure for Setting Parameters from the Beginning"................ 46

10.3. Setting Up the Controller without the Configuration Files................. 48

10.4. Setting Up the Network Using the Software..................................... 59

11. Revision History .................................................................................. 81

1. Related Manuals

The table below lists the manuals related to this document.

To ensure system safety, make sure to always read and heed the information provided in all

Safety Precautions, Precautions for Safe Use, and Precaution for Correct Use of manuals for

each device which is used in the system.

Cat. No. Model Manual name

W500 NJ501-[][][][]

NJ301-[][][][] NJ-series CPU Unit Hardware User's Manual

W501 NJ501-[][][][]

NJ301-[][][][] NJ-series CPU Unit Software User's Manual

W506 NJ501-[][][][]

NJ301-[][][][] NJ-series CPU Unit Built-in EtherNet/IPTM Port User's

Manual

W504 SYSMAC-SE2[][][] Sysmac Studio Version 1 Operation Manual

W472 CJ2H-CPU6[]-EIP

CJ2M-CPU3[] CJ-series CJ2 CPU Unit Hardware User's Manual

W473 CJ2H-CPU6[]-EIP

CJ2M-CPU3[] CJ-series CJ2 CPU Unit Software User's Manual

W465 CJ2H-CPU6[]-EIP

CJ2M-CPU3[] EtherNet/IP Unit Operation Manual

W446 - CX-Programmer Operation Manual

2. Terms and Definitions

Term Explanation and Definition

Node Controllers and devices are connected to the EtherNet/IP network via the

EtherNet/IP ports. The EtherNet/IP recognizes each EtherNet/IP port

connected to the network as one node.

When a device with two EtherNet/IP ports is connected to the

EtherNet/IP network, the EtherNet/IP recognizes this device as two

nodes.

The EtherNet/IP achieves the communications between controllers or the

communications between controllers and devices by exchanging data

between these nodes connected to the network.

Tag A minimum unit of the data that is exchanged on the EtherNet/IP network

is called a tag. The tag is defined as a network variable or as a physical

address, and it is allocated to the memory area of each device.

Tag set In the EtherNet/IP network, a data unit that consists of two or more tags

can be exchanged. The data unit consisting of two or more tags for the

data exchange is called a tag set. Up to eight tags can be configured per

tag set for OMRON controllers.

Tag data link In the EtherNet/IP, the tag and tag set can be exchanged cyclically

between nodes without using the user program. This standard feature on

the EtherNet/IP is called a tag data link.

Connection A connection is used to exchange data as a unit within which data

concurrency is maintained. The connection consists of tags or tag sets.

Creating the concurrent tag data link between the specified nodes is

called a "connection establishment ". When the connection is

established, the tags or tag sets that configure the connection are

exchanged between the specified nodes concurrently.

Originator and

Target To perform tag data links, one node requests the opening of a

communications line called a "connection".

The node that requests opening the connection is called "originator", and

the node that receives the request is called a "target".

Tag data link

parameter The tag data link parameter is the setting data to perform the tag data

link. It includes the data to set tags, tag sets, and connections.

3. Precautions

(1) Understand the specifications of devices which are used in the system. Allow some

margin for ratings and performance. Provide safety measures, such as installing safety

circuit in order to ensure safety and minimize risks of abnormal occurrence.

(2) To ensure system safety, always read and heed the information provided in all Safety

Precautions, Precautions for Safe Use, and Precaution for Correct Use of manuals for

each device used in the system.

(3) The user is encouraged to confirm the standards and regulations that the system must

conform to.

(4) It is prohibited to copy, to reproduce, and to distribute a part or the whole of this

document without the permission of OMRON Corporation.

(5) The information contained in this document is current as of September 2013. It is subject

to change without notice for improvement.

The following notation is used in this document.

Indicates a potentially hazardous situation which, if not avoided,

will result in minor or moderate injury, or may result in serious

injury or death.Additionally there may be significant property

damage.

Precautions for Safe Use

Precautions on what to do and what not to do to ensure safe usage of the product.

Precautions for Correct Use

Precautions on what to do and what not to do to ensure proper operation and performance.

Additional Information

Additional information to read as required.

This information is provided to increase understanding or make operation easier.

Symbol

4. Overview

This document describes the procedure for connecting CJ2 Programmable Controller +

EtherNet/IP Unit (hereinafter referred to as the PLC) of OMRON Corporation (hereinafter

referred to as OMRON) to NJ-series Machine Automation Controller (hereinafter referred to as

the Controller) via EtherNet/IP and provides the procedure for checking their connection.

It also contains the procedure for performing EtherNet/IP tag data link using the EtherNet/IP

settings of the project file that is prepared beforehand (hereinafter referred to as the

"procedure for using the configuration files").

Section 9 A-1 and Section 10 A-2 describe the procedures for setting parameters with

software without using files (hereinafter referred to as the "procedure for setting parameters

from beginning".

To follow the "procedure for using configuration files", obtain the latest "Sysmac Studio project

file" and "Network Configurator v3 network configuration file" (they are referred to as

"configuration files") from OMRON in advance.

Name File name Version

Sysmac Studio project file

(extension: smc) OMRON_CJ2_EIP_EV101.smc Ver.1.01

Network Configurator v3 network

configuration (extension: nvf) OMRON_CJ2_EIP_EV101.nvf Ver.1.01

5. Applicable Devices and Device Configuration

5.1. Applicable Devices

The applicable devices are as follows:

Manufacturer Name Model

OMRON NJ-series CPU Unit NJ501-[][][][]

NJ301-[][][][]

OMRON CJ2 CPU Unit CJ2[]-CPU[][]

OMRON EtherNet/IP Unit CJ1W-EIP21

CJ2H-CPU6[]-EIP

CJ2M-CPU3[]

Precautions for Correct Use

As applicable devices above, the devices with the models and versions listed in Section 5.2.

are actually used in this document to describe the procedure for connecting devices and

checking the connection.

You cannot use devices with versions lower than the versions listed in Section 5.2.

To use the above devices with versions not listed in Section 5.2 or versions higher than those

listed in Section 5.2, check the differences in the specifications by referring to the manuals

before operating the devices.

Additional Information

This document describes the procedure to establish the network connection. Except for the

connection procedure, it does not provide information on operation, installation or wiring

method. It also does not describe the functionality or operation of the devices. Refer to the

manuals or contact your OMRON representative.

5. Applicable Devices and Device Configuration

5.2. Device Configuration

The hardware components to reproduce the connection procedure of this document are as

follows:

Manufact

urer Name Model Version

OMRON NJ-series CPU Unit

(Built-in EtherNet/IP port) NJ501-1500 Ver.1.05

OMRON Power Supply Unit NJ-PA3001

OMRON Switching Hub W4S1-05C Ver.1.00

OMRON Sysmac Studio SYSMAC-SE2[][][] Ver.1.06

OMRON Network-Configurator (Included in Sysmac Studio.) Ver.3.55

OMRON Sysmac Studio project file OMRON_CJ2_EIP_EV101.smc Ver.1.01

OMRON Network Configurator v3 network

configuration file OMRON_CJ2_EIP_EV101.nvf Ver.1.01

- Personal computer (OS:

Windows7) -

- USB cable

(USB 2.0 type B connector) -

- LAN cable (STP (shielded,

twisted-pair) cable of Ethernet

category 5 or higher)

OMRON PLC CPU Unit

(Built-in EtherNet/IP port) CJ2M-CPU32

(Built-in CJ2M-EIP21) Ver.2.0

(Ver.2.1)

OMRON Power Supply Unit CJ1W-PA202

OMRON CX-One CXONE-AL[][]C-V4

/AL[][]D-V4

Ver.4.[][]

OMRON CX-Programmer (Included in CX-One.) Ver.9.43

Personal computer

(Sysmac Studio and

CX-One installed,

OS: Windows 7)

USB cable

LAN cable

NJ501-1500

(Built-in EtherNet/IP port)

Switching Hub

W4S1-05C

CJ2M-CPU32

(Built-in EtherNet/IP port)

USB cable

5. Applicable Devices and Device Configuration

Precautions for Correct Use

Prepare the latest "Sysmac Studio project file" and "Network Configurator v3 network

configuration file" from OMRON in advance.

(To obtain the files, contact your OMRON representative.)

Precautions for Correct Use

Update the Sysmac Studio and CX-Programmer to the versions specified in this section or

higher versions using the auto update function.

If a version not specified in this section is used, the procedures described in Section 7 and

subsequent sections may not be applicable. In that case, use the equivalent procedures

described in the Sysmac Studio Version 1 Operation Manual (Cat. No. W504), Network

Configurator Online Help and CX-Programmer Operation Manual (Cat. No. W466).

Additional Information

The system configuration in this document uses USB for the connection to the Controller. For

information on how to install a USB driver, refer to A-1 Driver Installation for Direct USB Cable

Connection of the Sysmac Studio Version 1 Operation Manual (Cat. No. W504).

Additional Information

The system configuration in this document uses USB for the connection between the

personal computer and PLC. For information on how to install the USB driver, refer to A-5

Installing the USB Driver of the CJ-series CJ2 CPU Unit Hardware User's Manual (Cat. No.

W472).

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Omron Controller Handbücher

Omron

Omron NX Series Bedienungsanleitung

Omron

Omron NJ-series Benutzerhandbuch

Omron

Omron E5*D series Bedienungsanleitung

Omron

Omron CJ Series Bedienungsanleitung

Omron

Omron JX - V1.0 Bedienungsanleitung

Omron

Omron 1S Series Bedienungsanleitung

Omron

Omron E5AK-AA2-500 AC/DC24 Bedienungsanleitung

Omron

Omron E5EK-T Bedienungsanleitung

Omron

Omron E5CC-8 Series Bedienungsanleitung

Omron

Omron NX-ILM400 Bedienungsanleitung

Omron

Omron C200HE-CPU42-E Handbuch

Omron

Omron E5CN-H Gebrauchs- und Pflegehandbuch

Omron

Omron SYSMAC CPM1 Bedienungsanleitung

Omron

Omron CS1G/H-CPUxx-H Bedienungsanleitung

Omron

Omron SYSMAC CPM1 Bedienungsanleitung

Omron

Omron C200H-ASC11 Bedienungsanleitung

Omron

Omron NX-ECC201 Bedienungsanleitung

Omron

Omron F3SP-U4P-TGR Bedienungsanleitung

Omron

Omron F3SX-E-D1RR Bedienungsanleitung

Omron

Omron V680 RFID - Bedienungsanleitung

Omron

Omron E5CD Bedienungsanleitung

Omron

Omron SYSMAC C series Bedienungsanleitung

Omron

Omron F3SX-N-D1RR2 Bedienungsanleitung

Omron

Omron SYSMAC C20P Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung

3M MicroTouch EX113 Bedienungsanleitung

KUHN

KUHN TKS Bedienungsanleitung

S&C

S&C PMH Bedienungs- und Wartungshandbuch