Omron NA-series Benutzerhandbuch

At the end of this document you will find links to products related to this catalog. You can go directly to our shop by

clicking HERE. HERE

Programmable Terminal

NA-series

Startup Guide

V120-E1-01

NA5-15W101

NA5-12W101

NA5-9W001

NA5-7W001

any form, or by any means, mechanical, electronic, photocopying, recording, or otherwise, without the prior written

permission of OMRON.

No patent liability is assumed with respect to the use of the information contained herein. Moreover, because

OMRON is constantly striving to improve its high-quality products, the information contained in this manual is

subject to change without notice. Every precaution has been taken in the preparation of this manual. Neverthe-

less, OMRON assumes no responsibility for errors or omissions. Neither is any liability assumed for damages

resulting from the use of the information contained in this publication.

OMRON, 2014

Trademarks

• Sysmac and SYSMAC are trademarks or registered trademarks of OMRON Corporation in Japan and other

countries for OMRON factory automation products.

• Windows, Windows XP, Windows Vista, Windows 7, Windows 8, Excel, and Visual Basic are registered

trademarks of Microsoft Corporation in the USA and other countries.

• EtherCAT®is registered trademark and patented technology, licensed by Beckhoff Automation GmbH, Germany.

• ODVA, CIP, CompoNet, DeviceNet, and EtherNet/IP are trademarks of ODVA.

• The SD and SDHC logos are trademarks of SD-3C, LLC.

Other company names and product names in this document are the trademarks or registered trademarks of their

respective companies.

Introduction

NA-series Programmable Terminal Startup Guide (V120)

Introduction

Thank you for purchasing an NA-series Programmable Terminal.

This manual contains information that is necessary to use the NA-series Programmable Terminal.

Please read this manual and make sure you understand the functionality and performance of the

NA-series Programmable Terminal before you attempt to use it in a control system.

Keep this manual in a safe place where it will be available for reference during operation.

This manual is intended for the following personnel, who must also have knowledge of electrical sys-

tems (an electrical engineer or the equivalent).

• Personnel in charge of introducing FA systems.

• Personnel in charge of designing FA systems.

• Personnel in charge of installing and maintaining FA systems.

• Personnel in charge of managing FA systems and facilities.

This manual covers the following products.

• NA-series Programmable Terminals

Intended Audience

Applicable Products

Relevant Manuals

2NA-series Programmable Terminal Startup Guide (V120)

Relevant Manuals

The basic information required to use an NA-series PT is provided in the following three manuals.

•NA-series Programmable Terminal Hardware User’s Manual (Cat. No. V117)

•NA-series Programmable Terminal Software User’s Manual (Cat. No. V118)

•NA-series Programmable Terminal Device Connection User’s Manual (Cat. No. V119)

Operations are performed from the Sysmac Studio Automation Software.

Refer to the Sysmac Studio Version 1 Operation Manual (Cat. No. W504) for information on the Sys-

mac Studio.

Other manuals are necessary for specific system configurations and applications.

The following manual is also available to walk you through installations and operations up to starting

actual operation using simple examples.

Refer to it as required.

•NA-series Programmable Terminal Startup Guide Manual (Cat. No. V120)

Manual Structure

NA-series Programmable Terminal Startup Guide (V120)

Manual Structure

The following page structure is used in this manual.

Note This illustration is provided only as a sample. It may not literally appear in this manual.

Page Structure and Markings

Level 1 heading

Level 2 heading

Level 3 heading

Level 2 heading

A step in a procedure

Manual name

Special information

Level 3 heading

Page tab

Give the current

headings.

Indicates a procedure.

Icons indicate precautions,

additional information, or

reference information.

Gives the number

of the main section.

3 - 5

3 Installation and Wiring

NA Series Programmable Terminal Hardware User’s Manual (V117)

3-3 Installing NA-series PTs

3-3-1 Installation in a Control Panel

3-3 Installing NA-series PTs

The NA-series PT is installed by embedding it in a control panel. Panel Mounting Brackets and a Phillips screwdriver are

required to mount the NA-series PT. The required number of Panel Mounting Brackets are included with the NA-series PT.

Use the following installation procedure.

1Open a hole in which to embed the NA-series PT with the following dimensions and insert the

NA-series PT from the front side of the panel.

Additional Information

You can use an NS-USBEXT-1M USB Relay Cable to extend the USB slave connector on the

back panel of the NA-series PT to the front surface of a control panel. If you use the USB Relay

Cable, open a hole with the following dimensions and install the Cable.

2Attach the panel mounting brackets from the back of the panel as shown in the following figure.

The number of mounting brackets depends on the size of the NA-series PT, as shown in the following

table. Refer to Bracket Mounting Locations for Different NA-series PT Sizes on page 3-8, below.

Catch the brackets in the mounting holes in the NA-series PT, pull forward lightly, and then use

a Phillips screwdriver to tighten the screws and secure the NA-series PT to the panel, which will

be held between the mounting brackets and the NA-series PT.

3-3-1 Installation in a Control Panel

Installation in a Control Panel

Model Dimensions

NA5-15W 392 +1/-0 × 268 +1/-0 mm (horizontal × vertical)

NA5-12W 310 +1/-0 × 221 +1/-0 mm (horizontal × vertical)

NA5-9W 261 +1/-0 × 166 +1/-0 mm (horizontal × vertical)

NA5-7W 197 + 0.5/-0 × 141 +0.5/-0 mm (horizontal × vertical)

Model Number of Panel Mounting Brackets

NA5-15W 8 locations

NA5-12W 6 locations

NA5-9W 4 locations

NA5-7W 4 locations

Panel Mounting Bracket Phillips screwdriver

Vertical

Horizontal

Recommended panel thickness: 1.6 to 6.0 mm

Manual Structure

4NA-series Programmable Terminal Startup Guide (V120)

Special information in this manual is classified as follows:

Precautions for Safe Use

Precautions on what to do and what not to do to ensure safe usage of the product.

Precautions for Correct Use

Indicates precautions on what to do and what not to do to ensure proper operation and perfor-

mance.

Additional Information

Additional information to read as required.

This information is provided to increase understanding or make operation easier.

Version Information

Information on differences in specifications and functionality with different versions is given.

Special Information

Sections in this Manual

NA-series Programmable Terminal Startup Guide (V120)

Useful Functions

IIndex

Creating HMI Application and Debugging

Preparing in advance

HMI Application Basics

System Configurations and Startup Procedures

Sections in this Manual

6NA-series Programmable Terminal Startup Guide (V120)

NA-series Programmable Terminal Startup Guide (V120)

CONTENTS

Introduction .............................................................................................................. 1

Relevant Manuals..................................................................................................... 2

Manual Structure...................................................................................................... 3

Sections in this Manual........................................................................................... 5

Terms and Conditions Agreement ......................................................................... 9

Safety Precautions..................................................................................................11

Precautions for Safe Use ...................................................................................... 13

Precautions for Correct Use ................................................................................. 16

Regulations and Standards .................................................................................. 17

Related Manuals..................................................................................................... 19

Terminology............................................................................................................ 23

Revision History..................................................................................................... 24

Section 1 System Configurations and Startup Procedures

1-1 Startup procedures................................................................................................................ 1-2

1-2 System Configurations and Units for Use................................................................................ 1-3

1-3 HMI application to be created.................................................................................................. 1-4

Section 2 HMI Application Basics

2-1 Pages ...................................................................................................................................... 2-2

2-2 Variables................................................................................................................................. 2-3

2-3 Subroutines............................................................................................................................ 2-4

Section 3 Preparing in advance

3-1 Installing Sysmac Studio ...................................................................................................... 3-2

3-2 Assembling a Hardware........................................................................................................3

-3

3-2-1 Wiring Power Supply .................................................................................................................. 3-3

3-2-2 Wiring Ethernet communication cable ........................................................................................3

-4

Section 4 Creating HMI Application and Debugging

4-1 Operation Flowchart.............................................................................................................. 4-2

4-2 Creating a New Project ......................................................................................................... 4-3

Andere Handbücher für NA-series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Omron Touch-Terminal Handbücher

Omron

Omron NP3 Series Referenzhandbuch

Omron

Omron NSH5 Bedienungsanleitung

Omron

Omron NS - Betriebsanleitung

Omron

Omron PC CONNECTION - 04-1997 Bedienungsanleitung

Omron

Omron NS10-TV Series Benutzerhandbuch

Omron

Omron NV Series Benutzerhandbuch

Omron

Omron NT31C Series Bedienungsanleitung

Omron

Omron NT2S-SF123B-E - Gebrauchsanweisung

Omron

Omron NV3W Series Gebrauchsanweisung

Omron

Omron NT21 Benutzerhandbuch

Omron

Omron NT620C Bedienungsanleitung

Omron

Omron NT30C-ST141-E Bedienungsanleitung

Omron

Omron NSJ5 Bedienungsanleitung

Omron

Omron NT11 - 01-2004 Bedienungsanleitung

Omron

Omron Programmable Terminals NT631 Installationshandbuch

Omron

Omron DEVICENET#05-2003 Bedienungsanleitung

Omron

Omron DeviceNet DRT2-ID16S-1 Bedienungsanleitung

Omron

Omron NT612G Series Bedienungsanleitung

Omron

Omron NA-series Gebrauchsanweisung

Omron

Omron NT20S-ST121B-EV3 Bedienungsanleitung

Omron

Omron NB-series Bedienungsanleitung

Omron

Omron NT21 Bedienungsanleitung

Omron

Omron NA-series Gebrauchsanweisung

Omron

Omron NT20S Bedienungsanleitung

Beliebte Touch-Terminal Handbücher anderer Marken

Wincor Nixdorf

Wincor Nixdorf iPOS plus Advanced Bedienungsanleitung

Ingenico

Ingenico AXIUM EX4000 Bedienungsanleitung

Heisei Electronics

Heisei Electronics Q-POS 815 Bedienungsanleitung

Amano

Amano MTX-15 Bedienungsanleitung

FLOWBIRD

FLOWBIRD CWT Compact Touch Bedienungsanleitung

Demco

Demco SP7 Bedienungsanleitung

Lathem

Lathem PC600 Series Bedienungsanleitung

Partner

Partner MF-2352 Bedienungsanleitung

NCR

NCR RealPOS 7460-2 Handbuch

Simrad

Simrad MS50 Montageanleitung

Unitech

Unitech MR350 MKII Kurzanleitung

Jungheinrich

Jungheinrich WMT 210 Bedienungsanleitung

Motorola

Motorola MTP850 Bedienungsanleitung

YASKAWA

YASKAWA 62H-MDC0 Bedienungsanleitung

MVG industries

MVG industries NeptuLink Bedienungsanleitung

Price Industries Limited

Price Industries Limited FDC Gebrauchsanweisung

Honeywell

Honeywell TemaKey Bedienungsanleitung

EBN

EBN BPC65-B-A16G Bedienungsanleitung