■Sensor Heads
Specifications
Dielectric strength
Vibration resistance (destruction)
Shock resistance (destruction)
Ambient temperature range
Ambient humidity range
Ambient atmosphere
Connection method
Degree of protection
Materials
Weight
Accessories
Current consumption
Power supply voltage
Sensing element
Shutter
Object light source
Built-in lens
Object lighting method
External lighting interface
Focus: f15.65
Pulse lighting
Focus: f13.47
Eight white LEDs Thirty-six white LEDs
Laser class (See note 1.) Class 1 Class 2
No Yes
1/3-inch CCD
Electronic shutter, shutter time: 1/1,000 to 1/4,000
15 VDC (Supplied from Amplifier Unit.) 15 VDC, 48 VDC (Supplied from Amplifier Unit.)
Approx. 200 mA
Approx. 350 mA (15 V: approx. 150 mA,
48 V: approx. 200 mA, including current
when external light is connected)
1,000 VAC, 50/60 Hz for 1 min
10 to 150 Hz, 0.35-mm single amplitude, 10 times each in X, Y, and Z directions for 8 min
150 m/s2, three times each in six directions (up/down, left/right, forward/backward)
Operating: 0 to 40°C, Storage: −25 to 65°C (with no icing or condensation)
Operating and storage: 35% to 85% (with no condensation)
Must be free of corrosive gas.
Prewired, Standard cable length: 2 m
IEC 60529, IP65 IEC 60529, IP65 (See note 2.)
Case: ABS, Mounting bracket: PBT
Approx. 200 g (including mounting bracket
and cord; packaged condition: approx. 300 g)
Mounting bracket (1),
Ferrite core (1),
Instruction sheet
Mounting bracket (1),
Ferrite core (2),
Instruction sheet
Approx. 270 g (including mounting bracket
and cord; packaged condition: approx. 350 g)
34 to 49 mm (variable)
5×4.6 mm to 9 ×8.3 mm (variable)
Item ZFV-SC10
(Narrow View Type)
ZFV-SC50
(Standard Type)
Setting distance (L)
Sensing range (H ×V)
Relation between setting distance
and sensing range
31 to 187 mm (variable)
10 ×9.2 mm to 50 ×46 mm (variable)
49 mm
34 mm
5 mm 9 mm
Sensing
range (H)
Sensing
range (H)
Setting distance (L)
187 mm
31 mm
10 mm 50 mm
Setting distance (L)
Sensing range V
H
Item ZFV-CA40 ZFV-CA45
NPN open collector, 30 VDC 50 mA max.,
residual voltage 1.2 V max.
PNP open collector, 50 mA max.,
residual voltage 1.2 V max.
USB2.0 1 port, full-speed (12 Mbps) MINI-B
RS-232C 1 port, 115200 bps max.
Patterns (PATTERN), Brightness (BRIGHT), Area (AREA), Width (WIDTH),
Position (POSITION), Count (COUNT), Color inspection (HUE)
•Patterns (PATTERN), Brightness (BRIGHT): Any rectangular area (256 ×256 max.)
•Area (AREA), Width (WIDTH), Position (POSITION), Count (COUNT),
Color inspection (HUE): Any rectangular area (full screen max.)
Full screen
468 ×432 (H ×V) max.
Supported for 8 banks.
13 ms (Standard), 8 ms (FAST mode), 5 ms (MAX mode)
Control output switching: ON for OK or ON for NG, ON delay/OFF delay, One-shot output, "ECO" mode
Stores NG images or all images.
ZFV measurement cycle (See note 1.)
Logs up to 128 images in series
15 max. (ZFV: 5 Units max.)
Amplifier Unit setting data can be saved to the memory card as bank data.
Reading bank data enables bank switching.
(1) Control output (OUTPUT) (2) Enable output (ENABLE) (3) Error output (ERROR)
(1) Sync measurement input (TRIG)/Continuous measurement input (TRIG); switched from menu
(2) Bank selection input (BANK1-3)
(3) Object stationary teaching (TEACH)/Object motion teaching (TEACH); switched from menu
Digital interface
TFT 1.8-inch LCD (Display dots: 557 ×234)
•Judgment result indicator (OUTPUT, Color: orange) •Inspection mode indicator (RUN, Color: green)
•Error indicator (ERR, Color: red) •Ready status indicator (READY, Color: blue)
•Cursor keys (up, down, left, right) •Setting key (SET) •Escape key (ESC)
•Operating mode switching (slide switch) •Menu switching (slide switch)
•Teaching/Display switching key (TEACH/VIEW) •Function keys (A to D, 4 inputs)
20.4 to 26.4 VDC (including ripple)
800 mA max. (with Sensor Head connected)
1,000 VAC, 50/60 Hz for 1 min between leads and Amplifier Unit case
1 kV, Pulse rise: 5 ns, Pulse width: 50 ns, Burst duration: 15 ms, Cycle: 300 ms
10 to 150 Hz, 0.1-mm single amplitude, 10 times each in X, Y, and Z directions for 8 min
150 m/s2, three times each in six directions (up/down, left/right, forward/backward)
Operating: 0 to 50°C, Storage: −25 to 65°C (with no icing or condensation)
Operating and storage: 35% to 85% (with no condensation)
Must be free of corrosive gas.
IEC 60529, IP20
Polycarbonate
Approx. 300 g (including cord; packaged condition: 450 g)
Ferrite core (1), Instruction sheet
Output method
Serial I/O
Inspection items
Teaching area size
Sensing area
Resolution
Bank selection
Image input cycle
Other functions
Image logging trigger
Sampling rate
Number of logged images
Number of connected Units
External bank
function
Output signals
Input signals
Sensor Head interface
Image display
Indicators
Operation interface
Power supply voltage
Current consumption
Dielectric strength
Noise immunity
Vibration resistance (destruction)
Shock resistance (destruction)
Ambient temperature range
Ambient humidity range
Ambient atmosphere
Degree of protection
Materials
Weight
Accessories
■Amplifier Units
Connecting
to ZS-DSU
(See note 2.)
Note 1: This is the sampling rate when logging images.To log measurement data only, use the ZS-DSU settings.
2: Connection with the ZS-DSU will be possible with a future upgrade.
Note 1: Applicable standards
IEC 60825-1: 1993, +A1: 1997, +A2: 2001
EN 60825-1: 1994, +A1: 2002, +A2: 2001
2: Consult your OMRON representative if IP67 protection is required.
