One Forall 6-DEVICE PVR Bedienungsanleitung

6-Device PVR Universal Remote Control

Control Remoto Universal de 6 Dispositivos

con funciones de PVR

User’s Guide

Guía del Usuario

Owner’s Manual

TABLE OF CONTENTS

Introduction............................................................1

Features and Functions .........................................2

Key Charts .............................................................3

Device Table ..........................................................4

Installing Batteries ................................................5

Programming Device Control..................................6

Programming DVD Player/ VCR Combo ..................6

Searching for Your Code.........................................7

Checking the Codes ...............................................7

Programming Master Power ...................................8

Programming the POWER Key for Master Power8

Operating Master Power .................................8

Clearing Master Power ....................................8

Using Keymover..................................................... 9

Programming Keymover ..................................9

Restoring Keymoved Keys to Default Settings..9

Restoring a Single Keymoved Key .............9

Restoring All Keymoved Keys

in a Single Mode.......................................9

Re-assigning Device Keys ......................................9

Changing Volume Lock.........................................10

Locking Volume Control to One Mode

(Global Volume Lock) .............................10

Unlocking Volume Control for a Single Device

(Individual Volume Unlock) ....................10

Unlocking All Volume Control

(Restoring Default Setting).....................10

Troubleshooting....................................................11

Customer Support. ...............................................11

Instructions to the User .......................................12

Limited Warranty..................................................12

Additional Information ........................................12

Manufacturer’s Codes

(Códigos del Fabricante) .....................................27

Setup Codes for Audio Receivers

(Códigos de Conﬁguración

para Receptores de Audio) .....................27

Setup Codes for Cable Boxes

(Códigos de Conﬁguración

para Cajas/Convertidores de Cable).......27

Setup Codes for CD Players

(Códigos de Conﬁguración

para Reproductores de CDs) ..................28

Setup Codes for DVD Players

(Códigos de Conﬁguración

para Reproductores DVD) .......................28

Setup Codes for DVD/VCR Combos

(Códigos de Conﬁguración

para Aparatos Combinados

DVD/ Videograbadora) ...........................29

Setup Codes for PVR/DVRs

(Códigos de Conﬁguración

para PVR/DVRs, Grabadores

Personales en Disco Duro) .................... 30

Setup Codes

for PVR/DVR/Satellite Receivers Combos

(Códigos de Conﬁguración

para Aparatos Combinados

PVR/DVR/Receptores de Satélite) ...........30

Setup Codes for Satellite Receivers

(Códigos de Conﬁguración

para Receptores de Satélite) ..................30

Setup Codes for TVs

(Códigos de Conﬁguración

para Televisores) ....................................31

Setup Codes for TV/DVD Player Combos

(Códigos de Conﬁguración

para Aparatos Combinados TV/ DVD)......33

Setup Codes for TV/VCR Player Combos

(Códigos de Conﬁguración

para Aparatos Combinados TV/ VCR)......33

Setup Codes for VCRs

(Códigos de Conﬁguración

para Videograbadoras) ...........................34

INTRODUCTION

e One For All 6-Device PVR Universal

Remote Control (URC-6131n) is

designed to remotely operate up to six

home entertainment devices and features

intuitive and easy-to use buttons to

operate PVR (Personal Video Recorder)/

DVR (Digital Video Recorder) and DVD

components. Its sophisticated technology

will allow you to consolidate all of your

original home entertainment remote

controls into one easy-to-use product.

Advanced features include:

t *OUVJUJWFCVUUPOTUPBMMPXFBTZBDDFTT

to your PVR/DVR functions and

menus

t %JSFDUDPEFTFUVQGPSFBTZEFWJDF

programming

t 4UFQBOE4FUDPEFTFUVQBOE$PEF

Verication for an alternate way to

program devices

t .BTUFS1PXFSGVODUJPOGPSNBTUFSPO

o control of all of your equipment

with a single keystroke

t 7PMVNF-PDLUPMPDLWPMVNFDPOUSPMT

to one mode or individual modes

One For All 6-Device PVR Universal Remote Control

t %FWJDF,FZ3F"TTJHONFOUUP

remotely control a second (duplicate)

device

t $PMPSDPEFELFZTUPRVJDLMZMPDBUF

popular functions

t $PEFMJCSBSZGPSQPQVMBSWJEFPBOE

audio devices

e URC-6131 remote control requires

two (2) new AAA alkaline batteries (not

included) and some easy programming

to control your devices. For best results,

please read and perform all instructions

listed here. Also, keep these instructions

for future reference.

FEATURES AND FUNCTIONS

Use the illustration below to locate

features on the One For All 6-Device

PVR Universal Remote Control

(URC-6131n) and then study the

i,FZ$IBSUTwUPMFBSOIPXUIFZGVODUJPO

To nd out what type of devices can

be controlled by each device key aer

QSPHSBNNJOHTFFUIFi%FWJDF5BCMFwPO

page 4.

Owner’s Manual

8IFOUIF-&%SFEMJHIU

blinks, the remote control

is working and (aer

programming) is sending

signals.

Press TV, PVR, DVD, CBL/SAT,

AUD, or VCR once to select a

desired home

entertainment device to

control. Also see the

i%FWJDF5BCMFwPOQBHF

Press POWER once to turn

on or o the selected

device. For master power

control, see “Programming

.BTUFS1PXFSwPOQBHF

Press MENU once to display

your selected device’s main

menu. For PVR/DVRs, use

173.FOV

Use INFO to display the

current channel and

program information.

Use GUIDE to display your

selected device’s program

guide or setup menu.

Use EXIT to exit from your

selected device’s guide or

menu.

Use the Cursor Keys to move

the cursor in the program

guide and menu screens.

Use OK to choose options

from your selected device’s

menu or guide.

In the AUD mode, use

SELECT to set the surround

sound.Use (or

) to adjust the

volume higher (or lower).

Use (or ) to adjust

the balance le (or right).

Use VOL + (or VOL -) to

raise (or lower) the sound

volume.

Use CH + (or CH -) to select

the next higher (or lower)

channel.

Press MUTE once to turn the

sound o or on.

Use to command your

PVR/DVR to instantly

replay the last 7 seconds of

a program you are viewing.

Press PREV once to recall

the last viewed channel and

to page back one screen on

the main menu.

In the AUD mode, use PREV

to select the receiver band.

Use or to perform

the umbs Down or

umbs Up feature on your

Tivo/ PVR/DVR device.

Press PVR MENU once to

turn the PVR/ DVR’s main

menu on or o.

Use to command your

PVR/DVR to skip or

advance through a

recorded program scene or

commercial.

Use the Transport Keys to

control your VCR, PVR/

DVR, DVD player, or VOD

(Video On Demand) if

available on your cable or

satellite service.

Press REC twice to record a

PVR/DVR or VCR

program.

Use AUDIO to select an

alternate audio channel (e.

H4QBOJTI

KEY CHARTS

One For All 6-Device PVR Universal Remote Control

Use CC to select closed

captions, if available on

your cable/satellite service

or DVD.

Press SUBT. once to turn

subtitles on or o, if

available.

Use ANGLE/SLEEP to

perform the angle function

on your DVD player or to

set the sleep timer on a

selected device if equipped

with this feature.

Use for slow motion

playback on a VCR, PVR/

DVR, or DVD player

equipped with this feature.

Press PLAY to cancel slow

motion.

Use the keypad (1~ 9and

0) to directly select

channels (e.g., 009 or 031).

In the AUD mode, use the

keypad (1~ 9and 0) to

select audio sources 1

through 10.

Press ENTER once aer

entering the channel

numbers on some TVs.

Use TV/VID to switch the

TV’s input to view TV or

video programs.

Use PIP to switch the

Picture-In-Picture feature

on or o (if available on

your TV).

Use SWAP to switch images

and sound between the

main and window pictures.

Use MOVE to move the

window picture to dierent

positions in the main

picture.

Use SET for all program-

ming sequences.

DEVICE TABLE

NOTE: Please refer to the table below

when performing the instructions in

“Programming Device Control” on page 6

or “Programming DVD Player/ VCR

Combo” on page 6.

Aer programming, the One For All

6-Device PVR Universal Remote Control

(URC-6131n) will be able to control the

following types of devices:

DEVICE

KEY

CONTROLS THESE DEVICES

Televisions

PVR/DVRs (Personal

Video Recorders/Digital

Video Recorders)

Cable Boxes (Converters),

4BUFMMJUF3FDFJWFSTPS

4BUFMMJUF173%73

Combos

VCRs or TV/VCR

Combos

DVD Player, DVD

Player/VCR Combos, or

TV/DVD Player Combos

Audio Receivers or CD

Players

NOTE: Audio Receiver/DVD Player

Combos (i.e.,Home eater In A Box)

are listed in “Setup Codes for Audio

Receivers (Códigos de Conguración para

Receptores de Audio)” on page 27.

Owner’s Manual

INSTALLING BATTERIES

1. On the remote control back, press on

the battery door to release it, then li

o the battery door.

2. Obtain two (2) new AAA alkaline

CBUUFSJFT.BUDIUIFBOEoNBSLTPO

UIFCBUUFSJFTUPUIFBOEoNBSLTJO

the battery case, then insert the new

batteries.

Battery Precautions:

t%POPUNJYPMEBOEOFXCBUUFSJFT

t%POPUNJYBMLBMJOFTUBOEBSEDBSCPO

[JODPSSFDIBSHFBCMFOJDLFMDBENJVN

batteries.

t"MXBZTSFNPWFPMEXFBLPSXPSOPVU

batteries promptly and recycle or dispose

of them in accordance with Local and

National Regulations.

3. Press the battery cover back into

place.

4. Test the remote control by pressing

any mode key (e.g., TV). If the

batteries are inserted correctly, the

-&%SFEMJHIUMPDBUFEVOEFSUIF

POWER key) will blink once.

NOTE: When batteries need replacement,

the remote control will stop operating.

Remove the old batteries and insert

new ones within 10 minutes to ensure

all of your programming information is

restored.

One For All 6-Device PVR Universal Remote Control

PROGRAMMING DEVICE CONTROL

e One For All 6-Device PVR Universal

Remote Control (URC-6131n) is

preprogrammed at the factory to operate

an RCA TV, VCR, and satellite receiver, a

Philips Tivo PVR/DVR, a Toshiba DVD

player, and a Pioneer audio receiver/

amplier. To control devices other than

the default brands, perform the following

steps; otherwise skip this section.

NOTE: For DVD Player/VCR Combo

control, see the next section.

1. Turn on a desired device (e.g., VCR

or DVD player) and, if applicable,

insert media (e.g., cassette or disc).

NOTE: Please read steps 2 through 4

completely before proceeding. Highlight or

write down the codes and device you wish

to program before starting step 2.

2. On the remote control, press a device

key once (i.e., TV, PVR, DVD, CBL/SAT,

AUD, or VCR).

NOTES

To program control of a cable box or

satellite receiver, press CBL/SAT once.

To program control of a CD player or

audio receiver, press AUD once.

To program control of a TV/VCR Combo,

press VCR once. Aer programming, you

will be able to control channel selection,

volume, and VCR functions.

To program control of a TV/DVD

Player Combo, press DVD once. Aer

programming, you will be able to control

channel selection, volume, and DVD

functions.

3. Press and hold SETVOUJMUIF-&%SFE

light) blinks twice, then release SET.

 6TFUIFi.BOVGBDUVSFST$PEFT

$ØEJHPTEFM'BCSJDBOUFwTUBSUJOHPO

page 27) to locate the type of device

and brand name and then enter the

rst four-digit code for your device.

*GQFSGPSNFEDPSSFDUMZUIF-&%XJMM

blink twice.

NOTE:*GUIF-&%EJEOPUCMJOLUXJDF

repeat steps 2 through 4 and enter the

same code again.

5. Aim the remote control at the device

and press POWER once. e device

should turn o. If it does not, repeat

steps 2 through 5, trying each code

for your brand until you nd one

that works. If it still doesn’t work, try

i4FBSDIJOHGPS:PVS$PEFwPOQBHF

NOTE: If the device does not have a POWER

LFZQSFTTUIF (PLAYLFZ

6. Repeat steps 1 through 5 for each

device you want to control. For future

reference, write down each working

device code in the following boxes:

TV Code:

Brand Name:_____________________

PVR Code:

Brand Name:_____________________

DVD Code:

Brand Name:_____________________

CBL/SAT Code:

Brand Name:_____________________

AUD Code:

Brand Name:_____________________

VCR Code:

Brand Name:_____________________

PROGRAMMING

DVD PLAYER/ VCR COMBO

1. Turn on the DVD Player/VCR

Combo and insert a DVD.

NOTE: Please read steps 2 through 4

completely before proceeding. Highlight or

write down the codes and device you wish

to program before starting step 2.

Owner’s Manual

2. On the remote control, press DVD.

Next, press and hold SET until the

-&%SFEMJHIUCMJOLTUXJDFUIFO

release SET.

 6TFUIFi4FUVQ$PEFTGPS%7%7$3

Combos (Códigos de Conguración

para Aparatos Combinados DVD/

7JEFPHSBCBEPSBwPOQBHFUP

locate the brand name and then enter

the rst four-digit code for your

device. If performed correctly, the

-&%XJMMCMJOLUXJDF

NOTE:*GUIF-&%EJEOPUCMJOLUXJDF

repeat steps 2 through 4 and enter the

same code again.

4. Aim the remote control at the device

and press POWER once. It should

turn o. If it does not, repeat steps 2

through 4, trying each code for your

brand until you nd one that works.

*GJUTUJMMEPFTOPUXPSLUSZi4FBSDIJOH

GPS:PVS$PEFwCFMPX

NOTE: If the device does not have a POWER

LFZQSFTTUIF (PLAYLFZ

5. If you’ve located a setup code that

works, but it also has a separate VCR

code, you’ll also need to program it

into the remote control to access VCR

controls as follows:

a. Press VCR once. en press and

hold the SETLFZVOUJMUIF-&%

blinks twice.

C&OUFSUIFVCR code for your DVD

Player/VCR Combo. If correct, the

-&%XJMMCMJOLUXJDF

NOTE: If a separate VCR setup code is not

listed, you can use the VCRLFZUPQSPHSBN

a separate VCR device or another device

TFFi3FBTTJHOJOH%FWJDF,FZTwPO

page 9).

6. For future reference, write down the

working DVD Player/VCR combo

code in the below boxes:

DVD Player/VCR Code:

Brand Name:____________________

VCR Code (if used):

Brand Name:_____________________

SEARCHING FOR YOUR CODE

If your device does not respond to the

remote control aer trying all codes

listed for your brand, or if your brand

is not listed at all, try searching for your

code. For example, to search for a code

for your TV:

1. On the remote control, press TV once.

2. Press and hold SETVOUJMUIF-&%SFE

light) blinks twice, then release SET.

 &OUFS9 9 1ćF-&%XJMMCMJOLUXJDF

4. Aim the remote control at the TV

and slowly alternate between pressing

POWER and TV4UPQXIFOUIF57

turns o.

NOTE: In the search mode, the remote

control will send IR codes from its library

to the selected device, starting with the

most popular code rst.

5. To lock in the code, press and release

SETćF-&%XJMMCMJOLUXJDF

6. To search for the codes of your other

devices, repeat steps 1 through 5, but

substitute the appropriate device key

for the device you are searching for.

CHECKING THE CODES

If you have set up the remote control

using the Searching For Your Code

procedure (above), you may need to nd

out which four-digit code is operating

your equipment.

One For All 6-Device PVR Universal Remote Control

For example, to nd out which code is

operating your TV:

1. On the remote control, press TV once.

2. Press and hold SETVOUJMUIF-&%SFE

light) blinks twice, then release SET.

 &OUFS9 9 0ćF-&%XJMMCMJOLUXJDF

4. To view the code for the rst digit,

press 1once. Wait 3 seconds, count

UIF-&%CMJOLTFHUISFFCMJOLT

3) and write down the number in the

lemost box in the TV code boxes on

page 6.

NOTE: If a code digit is 0, the LED will not

CMJOL

5. Repeat step 4 three more times for

remaining digits. Use 2for the second

digit, 3for the third digit, and 4for

the fourth digit. Write down the code

digits in the remaining TV code

boxes on page 6.

6. To check for codes of other devices,

repeat steps 1 through 5, but

substitute the appropriate device key

for each device you are checking.

Write down the device’s code digits in

the appropriate code boxes on page 6.

PROGRAMMING MASTER POWER

In its default state, the POWER key

on the URC-6131 remote control

will individually power your home

entertainment devices on or o.

However, you can also program a Master

Power function onto the POWER key that

will sequentially turn on or o all the

devices with a single key press.

PROGRAMMING THE POWER KEY FOR

MASTER POWER

1. Press and hold SETVOUJMUIF-&%SFE

light) blinks twice, then release SET.

 &OUFS9 9 5ćF-&%XJMMCMJOLUXJDF

en press POWER once.

3. For the rst device you want in the

power on sequence, press its device

key (e.g., CBL/SAT) once.

4. Repeat step 3 up to ve more times to

add desired devices to the power-on

sequence.

5. To save the settings and exit the

program, press and hold SET until the

-&%CMJOLTUXJDFUIFOSFMFBTFSET.

OPERATING MASTER POWER

1. Aer programming, point the

remote control at the devices and

press POWER for at least 2 seconds

to sequentially turn on or o your

devices.

NOTE: When you press POWER for less than

2 seconds, the remote will only send a

QPXFSDPNNBOEUPUIFDVSSFOUMZTFMFDUFE

device. is allows you to still individually

power devices on or o.

 :PVXJMMTFFUIFEFWJDFTUVSOPOPS

o according to your programmed

sequence.

NOTE:ćFDVSSFOUMZTFMFDUFEEFWJDFXJMM

always turn on rst, followed by the

remaining programmed sequence. Aer

the master power sequence is complete, the

SFNPUFXJMMDPOUSPMUIFĕSTUQPXFSFEPO

device.

NOTE: If one or more devices does not have

B108&3LFZUIFQPXFSPČPOTFRVFODF

may be slightly delayed when the remote

control signals the device(s). is action is

normal.

CLEARING MASTER POWER

1. Press and hold SETVOUJMUIF-&%SFE

light) blinks twice, then release SET.

 &OUFS9 9 5ćF-&%XJMMCMJOLUXJDF

en press POWER once.

3. Press and hold SETVOUJMUIF-&%

blinks twice, then release SET.BTUFS

Power is now cleared.

Andere Handbücher für 6-DEVICE PVR

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere One Forall Fernbedienung Handbücher

One Forall

One Forall URC 5065 Bedienungsanleitung

One Forall

One Forall URC-7200 Gebrauchs- und Wartungshandbuch

One Forall

One Forall 5 Bedienungsanleitung

One Forall

One Forall OARP05S Bedienungsanleitung

One Forall

One Forall URC 1921 Bedienungsanleitung

One Forall

One Forall URC-7800 Cinema 7+ Bedienungsanleitung

One Forall

One Forall URC-7110 Einfaches Handbuch

One Forall

One Forall Kameleon URC-9962 Bedienungsanleitung

One Forall

One Forall PHILIPS URC-1313 Bedienungsanleitung

One Forall

One Forall URC 1913 Bedienungsanleitung

One Forall

One Forall ONE FOR ALL 4080CODES Bedienungsanleitung

One Forall

One Forall URC-7781 Bedienungsanleitung

One Forall

One Forall URC-8811 Bedienungsanleitung

One Forall

One Forall URC-6131 Bedienungsanleitung

One Forall

One Forall URC 1914 Bedienungsanleitung

One Forall

One Forall Essence 6 Device Bedienungsanleitung

One Forall

One Forall KAMELEON 3 URC-8203 Bedienungsanleitung

One Forall

One Forall URC-4730 Handbuch

One Forall

One Forall SMART STREAMER Bedienungsanleitung

One Forall

One Forall URC1913-2 Bedienungsanleitung

One Forall

One Forall URC-6410 Administratorhandbuch

One Forall

One Forall URC-7110 Bedienungsanleitung

One Forall

One Forall URC-7140 Bedienungsanleitung

One Forall

One Forall URC-4640w Bedienungsanleitung

Beliebte Fernbedienung Handbücher anderer Marken

Panasonic

Panasonic EUR7622KB0 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen Beo4 Bedienungsanleitung

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Bedienungsanleitung

Multiplex

Multiplex PROFI TX 9 Bedienungsanleitung

One Remote

One Remote RMB4 Bedienungsanleitung

FUTABA

FUTABA 9ZAP - PART2 Bedienungsanleitung

HR Matic

HR Matic HR MULTI 3 Bedienungsanleitung

Yamaha

Yamaha ACC-GNRST-30-20 Bedienungsanleitung

EisSound

EisSound KBSOUND Bedienungsanleitung

Marantz

Marantz RC101 Bedienungsanleitung

Conrad

Conrad FS20 TC6 Bedienungsanleitung

Anritsu

Anritsu MP1777A Bedienungsanleitung

Niles

Niles WVC100 Fehlerbehebungshandbuch

RCA

RCA RCU1300 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen BEO6 Bedienungsanleitung

GE 94901 Bedienungsanleitung

Onbon

Onbon YQ1-75 Bedienungsanleitung

FUTABA

FUTABA R7108SB Montageanleitung