One Forall URC-3435 Bedienungsanleitung

Universal remote

Universal fjernbetjening

Universal fjernkontroll

Universal fjärrkontroll

Yleiskaukosäädin

∆

‹

Универсальный пульт

дистанционного управления

Evrensel uzaktan kumanda

Universal Fernbedienung

Mando a Distancia Universal

Instruction manual

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .P.

Brugsanvisning

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .S.

Bruksanvisning

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .S.

Bruksanvisning

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .S.

Käyttöohje

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .S.

√

‰

›

‹

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..

Инструкция пользователя

. . . . . . . . . . . . ..

Kullanım kılavuzu

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..

Bedienungsanleitung

. . . . . . . . . . . . . . . . . . . . . . . . . .S.

uía del usario

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .P.

English

Dansk

Norsk

Svensk

Suomi

EÏÏËÓÈÎ¿

Русский

Türkçe

Deutsch

Español

URC-3435

705034_3435_S-10:Ecoline_3_Rubbe _Scand_10_Talen 12-03-2007 23:54 Pagina b

2WWW.ONEFORALL.COM

PICTURE OF THE ONE FOR ALL 3 REMOTE

INSTALLIN THE BATTERIES

THE KEYPAD

SET UP

SETTIN UP THE ONE FOR ALL 3

Direct code set up 6

Search Method 7

SET-UP CODES

Televisions 93

Video Recorders 100

DVD Players 102

EXTRA FEATURES

Mode re-assignment (Changing a device mode)

Volume Punch Through

QUICK CODE REFERENCE

PROBLEM & SOLUTION

CUSTOMER SERVICE

Table of Contents

Your ONE FOR ALL 3 Package contains:

• Your ONE FOR ALL 3 Remote

• Your ONE FOR ALL 3 Manual

Your manual is divided into two parts: set-up instructions and device codes.

You may need this guide again in the future, so please be sure to

keep it.

Your ONE FOR ALL 3 needs 2 new “AA/LR6” alkaline batteries.

Your ONE FOR ALL 3 can operate three devices:

TV : Television

VCR : Video Recorder

DVD : DVD Player

About Your ONE FOR ALL 3

English

705034_3435_S-10:Ecoline_3_Rubbe _Scand_10_Talen 12-03-2007 23:54 Pagina c

WWW.ONEFORALL.COM 3

10/11

705034_3435_S-10:Ecoline_3_Rubbe _Scand_10_Talen 12-03-2007 23:54 Pagina 3

Installing the Batteries

Your ONE FOR ALL 3 needs 2 new “AA/LR6” alkaline batteries.

1Remove the battery cover from the back of your ONE FOR ALL 3 by

pressing down on the tab.

2Match the batteries to the + and - marks inside the battery case,

then insert the batteries.

3Press the battery cover back into place.

See picture of ONE FOR ALL 3 remote on page 3

1LED

The LED (Light Emitting Diode) flashes red to show the remote is

working.

2MA IC Key

The MAGIC key is used to set up your ONE FOR ALL 3.

3MENU Key

The MENU key controls the same function as it did on your original

remote.

4POWER Key

The Power key controls the same function as it did on your original

remote.

5Device Keys

The TV, VCR and DVD keys select the device to be controlled. For

example pressing the TV key allows the remote to control the

functions of your Television, after pressing VCR you can operate

your Video Recorder and the DVD key operates your DVD Player.

6Number Keys

The Number keys (0-9, 10, 20 (AV)) provide functions just like your

original remote, such as direct access programme selection. If your

original remote uses one/two digit input switching (-/-- symbol), this

function can be obtained by pressing the -/-- key, which is the same

as the 10 key. If your original remote has a 20 key, this function can

also be found under the AV key.

7Programme (Channel) +/- Keys

These keys operate in the same way as the keys on your original

remote. If available on your original remote, these keys will allow

you to navigate through the menu.

The Keypad

Important notes:

- In order to avoid having to reprogram your ONE FOR ALL 3 after

you remove the batteries, you will need to insert new batteries

within 5 minutes. Also it is best that you do not use rechargable

batteries.

-On the inside of the battery compartment door you will find a

label on which to write your Set-Up codes after your ONE FOR

ALL 3 is set up for your device. Please write down your codes for

easy, future reference.

WWW.ONEFORALL.COM 4

705034_3435_S-10:Ecoline_3_Rubbe _Scand_10_Talen 12-03-2007 23:54 Pagina 4

WWW.ONEFORALL.COM 5

8MUTE Key

The Mute key operates the same function it did on your orginal

remote control. Also, if your original remote control required that

you press an “OK” or “ENTER” key during Menu operation, the

Mute key can be used for this function.

9Volume +/- Keys

These keys operate in the same way as the keys on your original

remote. If available on your original remote, these keys will allow

you to navigate through the menu.

10 Transport keys (VCR / DVD)

These keys operate the transport functions (PLAY, FF, REW etc.) of

your device. To prevent accidental recording, the RECORD key must

be pressed twice to start recording.

11 Teletext and Fastext Keys

After pressing the TV key, the transport keys (REW, PLAY, FF, PAUSE)

are used to operate the main Teletext functions. The symbols below

the keys are for Teletext. The text keys are used to access the

Teletext functions of your television. Of course, your television must

have Teletext capability.

TEXT ON: Puts the television in the Teletext mode.

TEXT OFF: Switches the television back to regular viewing mode. On

some televisions, this may be done by pressing the TEXT ON key

several times.

HOLD/STOP: Stops changing pages.

EXPAND: Shows the top half of the Teletext page in larger letters.

By pressing again, you can see the bottom half of the Teletext page

enlarged. To return to regular Teletext viewing, press the EXPAND

key again, or press the TEXT ON key, depending on your television.

After pressing the TV key and accessing the text mode, the keys marked

red, green, yellow and blue, allow you to access the Fastext functions of

your television. If on your original remote control these keys are

used for Menu navigation, the ONE FOR ALL Fastext keys may

operate in the same way.

Important note: For a more detailed explanation of Teletext and Fastext,

please refer to the manual of your television. Remember, different televisions

control Teletext and Fastext features in different ways. Not all of the Teletext

functions may be available for your particular model.

705034_3435_S-10:Ecoline_3_Rubbe _Scand_10_Talen 12-03-2007 23:54 Pagina 5

6WWW.ONEFORALL.COM

Direct code set up

Example: To set up the ONE FOR ALL 3 for your television:

1Find the code for your device in the Code list (page 93 -

104). Codes are listed by device type and brand name.

The most popular code is listed first. Make sure your

device is switched on (not on standby).

2 Press the TV key on the ONE FOR ALL 3.

3Press and hold down MA IC until the red light blinks

twice. (The red light will blink once and then twice.)

4Enter your (four-digit device code) using the number

keys. The red light will blink twice.

5Now, aim the ONE FOR ALL 3 at your device and

press POWER If your device switches off, the ONE

FOR ALL 3 is ready to operate your device.

6Turn your device back on and try all the remote’s functions to ensure

they are working properly. If the functions do not work properly,

repeat steps 1-5 using another code listed under your brand.

7 If your device does not respond, follow steps 1 to 5 with

each code listed for your brand. If none of the codes listed

for your brand operate your device, or if your brand is not

listed at all, try the search method described on page 7.

8 Write your code in the four boxes provided in the battery

compartment and on page 10 for easy future reference.

Setting up the ONE FOR ALL 3

Before you start, please read these instructions carefully

Important notes:

- Most TV’s do not switch on pressing the POWER key. Please try pressing a

“number” key or the “TV-text off” key to switch your TV back on.

- Some codes are quite similar. If your device does not respond or is not

functioning properly with one of the codes, try another code listed under

your brand.

- If your device’s original remote control does not have a POWER key, press

PLAY instead of POWER when setting up your device.

- Remember to press the correct device key before operating your device.

Only one device can be assigned to a device key. If your original remote

operates more than one device, you need to set up each device separately..

ONEFOR ALL



Acura

Admiral

Adyson

Agazi

AGB

Agef

Aiko

0009

0087,0093,0363,041

0217,0216

0264

0516

0087

0216,0009,0037,0

0037,0274

0361,0208,0371,

_ _ _ _

6WWW.ONEFORALL.COM

Devices can be found under the following keys:

Television

Video Recorder DVD Player

705034_3435_S-10:Ecoline_3_Rubbe _Scand_10_Talen 12-03-2007 23:54 Pagina 6

The Search Method

If your device does not respond to the ONE FOR ALL 3 after you have tried

all the codes listed for your brand, try searching for your code. The Search

Method allows you to find the code for your device by scanning through all

the codes contained in the memory of the ONE FOR ALL 3. The Search

Method may also work if your brand is not listed at all.

Example: To search for your TV code:

1Switch your television on (not on standby) and aim your

ONE FOR ALL at your TV.

2Press the TV key on your ONE FOR ALL 3.

3Press and hold down MA IC until the ONE FOR ALL 3’s

red light blinks twice (The red light will blink once and

then twice).

4Press 9 9 1. The red light will blink twice.

5Next, press POWER.

6Aim the ONE FOR ALL 3 at your Television. Now press CH+

over and over, until your Television turns off (everytime

you press the CH+ key the ONE FOR ALL 3 will send out a

POWER signal from the next code contained in the

memory). You may have to press this key many times (up

to 150 times) so please be patient. If you skip past a code,

you can go to the previous code(s) by pressing the CH-

key. Remember to keep pointing the ONE FOR ALL 3 at

your Television while pressing this key.

7As soon as your television turns off, press MA IC to store

the code.

Once you have Set-Up your ONE FOR ALL 3, you can blink back your

SET-UP CODE for future reference.

Example: To blink out your Television code:

1Press TV once.

2 Press and hold MA IC until the ONE FOR ALL 3’s red light

blinks twice (The red light will blink once and then twice).

3Press 9 9 0. The red light will blink twice.

4For the first digit of your four-digit code, press 1and

count all the red blinks. If there are no blinks, the digit is

"0".

5For the second digit, press 2and count all the red blinks.

If there are no blinks, the digit is "0".

6For the third digit, press 3and count all the red blinks.

If there are no blinks, the digit is "0".

7For the fourth digit, press 4and count

all the red blinks. If there are no blinks, the digit is "0".

Now you have your four-digit code.

Important notes:

- To search for the code for another device follow the instructions above

only press the appropriate device key instead of TV during steps 2 and 5.

- If the original remote control of your device does not have a POWER key,

press PLAY instead of POWER during step 5.

WWW.ONEFORALL.COM 7

705034_3435_S-10:Ecoline_3_Rubbe _Scand_10_Talen 12-03-2007 23:54 Pagina 7

_ _ _ _

MAGIC

TV/

VCR

REC

SLOW

TV VCR SAT AUX TV VCR CBL AUX

654

MAGIC

TV/

VCR

REC

SLOW

TV VCR SAT AUX TV VCR CBL AUX

654

MAGIC

TV/

VCR

REC

SLOW

TV VCR SAT AUX TV VCR CBL AUX

654

MAGIC

TV/

VCR

REC

SLOW

TV VCR SAT AUX TV VCR CBL AUX

654

MAGIC

TV/

VCR

REC

SLOW

TV VCR SAT AUX TV VCR CBL AUX

654

MAGIC

TV/

VCR

REC

SLOW

TV VCR SAT AUX TV VCR CBL AUX

654

MAGIC

TV/

VCR

REC

SLOW

TV VCR SAT AUX TV VCR CBL AUX

654

MAGIC

TV/

VCR

REC

SLOW

TV VCR SAT AUX TV VCR CBL AUX

654

MAGIC

TV/

VCR

REC

SLOW

TV VCR SAT AUX TV VCR CBL AUX

654

MAGIC

TV/

VCR

REC

SLOW

TV VCR SAT AUX TV VCR CBL AUX

654

MAGIC

TV/

VCR

REC

SLOW

TV VCR SAT AUX TV VCR CBL AUX

654

MAGIC

TV/

VCR

REC

SLOW

TV VCR SAT AUX TV VCR CBL AUX

654

MAGIC

TV/

VCR

REC

SLOW

TV VCR SAT AUX TV VCR CBL AUX

654

MAGIC

TV/

VCR

REC

SLOW

TV VCR SAT AUX TV VCR CBL AUX

654

MAGIC

TV/

VCR

REC

SLOW

TV VCR SAT AUX TV VCR CBL AUX

654

MAGIC

TV/

VCR

REC

SLOW

TV VCR SAT AUX TV VCR CBL AUX

654

MAGIC

TV/

VCR

REC

SLOW

TV VCR SAT AUX TV VCR CBL AUX

654

MAGIC

TV/

VCR

REC

SLOW

TV VCR SAT AUX TV VCR CBL AUX

654

MAGIC

TV/

VCR

REC

SLOW

TV VCR SAT AUX TV VCR CBL AUX

654

MAGIC

TV/

VCR

REC

SLOW

TV VCR SAT AUX TV VCR CBL AUX

654

MAGIC

TV/

VCR

REC

SLOW

TV VCR SAT AUX TV VCR CBL AUX

654

MAGIC

TV/

VCR

REC

SLOW

TV VCR SAT AUX TV VCR CBL AUX

654

MAGIC

TV/

VCR

REC

SLOW

TV VCR SAT AUX TV VCR CBL AUX

654

8WWW.ONEFORALL.COM

It is possible to change the mode of any device key. This is useful if you

want to set up two of the same devices on the ONE FOR ALL 3. The code

can be set up using “Direct code set up” (p. 6) or “Search method” (p. 7).

To change a device key, see the three examples below.

Example 1) if you would like to program a second TV on the DVD key.

Example 2) if you would like to program a second TV on the VCR key.

Example 3) if you would like to program a second VCR on the DVD key.

Example 1:

To program a second Television on the DVD key (for example), you need

to change the DVD key into a TV key, so press:

(*) (**)

The DVD key has now become a second TV key.

Now enter the Set-Up code for your second TV by pressing:

(*) (TV code) (**)

Example 2:

To program a second Television on the VCR key (for example), you need

to change the VCR key into a TV key, so press:

(*) (**)

The VCR key has now become a second TV key.

Now enter the Set-Up code for your second TV by pressing:

(*) (TV code) (**)

Example 3:

To program a second Video Recorder on the DVD key (for example), you

need to change the DVD key into a VCR key, so press:

(*) (**)

The DVD key has now become a second VCR key.

Now enter the Set-Up code for your second VCR by pressing:

(*) (VCR code) (**)

Resetting a Device key

Example: To reset the DVD key to its original mode, press:

(*) (**)

Example: To reset the VCR key to its original mode, press:

(*) (**)

(*) Press and hold down the MA IC key until the red light (LED)

blinks twice.

(**) The red light (LED) will blink once then twice.

Extra Features

Mode re-assignment

(Changing a device mode)

705034_3435_S-10:Ecoline_3_Rubbe _Scand_10_Talen 12-03-2007 23:54 Pagina 8

WWW.ONEFORALL.COM 9

Volume Punch Through

You may be able to use some functions of your Television, Video recorder,

DVD player at the same time. For example: if you are watching a program

on your video recorder, you can adjust the volume (a TV function) without

pressing the TV mode key on your ONE FOR ALL 3. The table below lists

some of the possibilities.

Last Device Mode Key Pressed: You Can Control:

VCR TV volume up and down, mute

DVD TV volume up and down, mute

To punch through to TV volume while in the VCR or DVD mode:

1. Press and hold MA IC until the red light blinks

twice.

2.Press 9 9 3.

3. Then press the TV key and the red light will blink

twice.

To cancel the “Volume Punch Through” per mode:

(Example: to cancel the “Volume Punch Through” for the VCR mode)

1. Press VCR once.

2. Press and hold down the MA IC key until the red

light blinks twice.

3. Press 9 9 3.

4. Then press the Volume (-) key and the red light will

blink four times.

Example: being in VCR mode, you will be able to control VOL+/- or MUTE

functions of your VCR (provided it has volume control).

To cancel the „Volume Punch Through“:

1. Press and hold MA IC until the red light blinks

twice.

2. Press 9 9 3.

3. Press the Volume (+) key and the red light will blink

four times.

Extra Features

705034_3435_S-10:Ecoline_3_Rubbe _Scand_10_Talen 12-03-2007 23:54 Pagina 9

10 WWW.ONEFORALL.COM

Problem & Solution

Problem:

Your brand is not listed

in the code section?

The ONE FOR ALL 3 does

not operate your

device(s)?

The ONE FOR ALL 3 is not

performing commands

properly?

Problems changing

channels?

Video not recording?

The ONE FOR ALL 3 does

not respond after

pressing a key?

The red light does not

blink when you press

a key?

Solution:

Try the search method on page 7.

A) Try all the codes listed for

your brand. B) Try the search

method on page 7.

You may be using the wrong

code. Try repeating the Direct

Set-Up using another code listed

under your brand or start the

search method over again to

locate the proper code.

Enter the programme number

exactly as you would on your

original remote.

As a safety feature on your ONE

FOR ALL 3, you must press the

Record key twice.

Make sure you are using new

batteries and are aiming the one

for all at your device.

Replace batteries with 2 fresh,

new “AA” alkaline batteries.

Quick Code Reference

Write down the codes for your devices in the boxes below and in

the battery compartment for quick and easy reference.

Device Type Code

1._________________________

2._________________________

3._________________________

■

■■

■ ■

■

■■

■ ■

■

■■

■ ■

■

705034_3435_S-10:Ecoline_3_Rubbe _Scand_10_Talen 12-03-2007 23:54 Pagina 10

Andere Handbücher für URC-3435

Inhaltsverzeichnis

Sprachen:

Andere One Forall Fernbedienung Handbücher

One Forall

One Forall HC-8000 Bedienungsanleitung

One Forall

One Forall SAMSUNG URC-4910 Bedienungsanleitung

One Forall

One Forall URC-7110 Betriebsanleitung

One Forall

One Forall KAMELEON 5 Bedienungsanleitung

One Forall

One Forall URC1281 Bedienungsanleitung

One Forall

One Forall SimpleSet URC-7960 Bedienungsanleitung

One Forall

One Forall URC-6131 Bedienungsanleitung

One Forall

One Forall SMART STREAMER URC 7945 Bedienungsanleitung

One Forall

One Forall ONE FOR ALL URC3220 Bedienungsanleitung

One Forall

One Forall 6-DEVICE PVR Bedienungsanleitung

One Forall

One Forall URC1030 Stücklistenhandbuch

One Forall

One Forall KAMELEON 3 Bedienungsanleitung

One Forall

One Forall URC-7110 Bedienungsanleitung

One Forall

One Forall URC 5065 Bedienungsanleitung

One Forall

One Forall URC-2981 Bedienungsanleitung

One Forall

One Forall URC 1913 Bedienungsanleitung

One Forall

One Forall URC 1918 Bedienungsanleitung

One Forall

One Forall URC-4730 Handbuch

One Forall

One Forall SAMSUNG URC-1310 Bedienungsanleitung

One Forall

One Forall URC 7115 Bedienungsanleitung

One Forall

One Forall URC-8011 Bedienungsanleitung

One Forall

One Forall URC 7145 Bedienungsanleitung

One Forall

One Forall Cinema 6+ URC 6800 Bedienungsanleitung

One Forall

One Forall URC 7945 Bedienungsanleitung

Beliebte Fernbedienung Handbücher anderer Marken

Panasonic

Panasonic EUR7622KB0 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen Beo4 Bedienungsanleitung

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Bedienungsanleitung

Multiplex

Multiplex PROFI TX 9 Bedienungsanleitung

One Remote

One Remote RMB4 Bedienungsanleitung

FUTABA

FUTABA 9ZAP - PART2 Bedienungsanleitung

HR Matic

HR Matic HR MULTI 3 Bedienungsanleitung

Yamaha

Yamaha ACC-GNRST-30-20 Bedienungsanleitung

EisSound

EisSound KBSOUND Bedienungsanleitung

Marantz

Marantz RC101 Bedienungsanleitung

Conrad

Conrad FS20 TC6 Bedienungsanleitung

Anritsu

Anritsu MP1777A Bedienungsanleitung

Niles

Niles WVC100 Fehlerbehebungshandbuch

RCA

RCA RCU1300 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen BEO6 Bedienungsanleitung

GE 94901 Bedienungsanleitung

Onbon

Onbon YQ1-75 Bedienungsanleitung

FUTABA

FUTABA R7108SB Montageanleitung