OneTouch UltraEasy Bedienungsanleitung

AW 06629402C

Rev. date: 07/2012

USER GUIDE

Blood Glucose Monitoring System

Contents:

Getting to know your system 1

Setting the time and date, and coding your meter 4

Testing your blood glucose 8

Reviewing past results 16

Control solution testing 18

Caring for your system 20

Error messages and details about your system 24

Call OneTouch® Customer Care

UK 0800 121200

Ireland 1800 535676

Or,

Visit us at www.LifeScan.co.uk

If you cannot reach OneTouch® Customer Care, contact your healthcare professional for advice.

LifeScan Europe

Division of Cilag GmbH

International

6300 Zug

Switzerland

Distributed by LifeScan UK, a Division of Ortho-Clinical Diagnostics,

Johnson & Johnson, 50-100 Holmers Farm Way, High Wycombe,

Buckinghamshire HP12 4DP, United Kingdom

Before you begin

Before using this product to test your blood glucose, carefully read this User Guide and the inserts that come with the OneTouch®

Ultra® Test Strips and OneTouch® Ultra® Control Solution. Take note of warnings and cautions throughout this User Guide, which are

identied with . Many people nd it helpful to practice the test with control solution before testing with blood for the rst time.

See Section 5, Control solution testing.

Intended use

The OneTouch® UltraEasy® Blood Glucose Monitoring System is intended to be used for the quantitative measurement of glucose

(sugar) in fresh capillary whole blood. The OneTouch® UltraEasy® System is intended for self-testing outside the body (in vitro

diagnostic use) by people with diabetes at home and by healthcare professionals in a clinical setting as an aid to monitor the

eectiveness of diabetes control. It should not be used for the diagnosis of diabetes or for testing newborns.

Test principle

Glucose in the blood sample mixes with special chemicals in the test strip and a small electric current is produced. The strength

of this current changes with the amount of glucose in the blood sample. Your meter measures the current, calculates your blood

glucose level, displays the result, and stores it in its memory.

GETTING TO KNOW YOUR SYSTEM

Getting to know your system

The OneTouch® UltraEasy® Blood Glucose Monitoring System

Included with your kit:

a. OneTouch® UltraEasy® Meter (battery included)

b. Lancing Device

c. Sterile Lancet(s)

d. Carrying Case

If any of these items are missing from your kit, call

OneTouch® Customer Care 0800 121200 (UK) or

1800 535676 (Ireland).

Available separately:

e. OneTouch® Ultra® Test Strips

f. OneTouch® Ultra® Control Solution

g. Clear Cap for AST testing

For availability of control solution, call

OneTouch® Customer Care 0800 121 200 (UK) or

1800 535 676 (Ireland).

WARNING: Keep the meter and testing

supplies away from young children. Small

items such as the battery door, battery,

test strips, lancets, protective disks on the

lancets and control solution vial cap are

choking hazards.

GETTING TO KNOW YOUR SYSTEM

Getting to know your system

METER

Display mmol/L is the pre-

set unit of measure

Up and down buttons

Turns the meter on or o

Select or change information

Test port

Insert test strip here to

turn meter on for testing

TEST STRIP Edge to

apply sample

Conrmation

window

Contact bars

Insert into test port

GETTING TO KNOW YOUR SYSTEM

Turning your meter on

To perform a test, insert a test strip as far as it will go. The display will turn on and

the meter will briey perform system checks. Or, to change the time and date,

start with the meter o, then press and hold ▼for ve seconds until the start-up

test screen appears. After the start-up test screen, the pre-set time and date will

appear on the display. Or, if you want to turn the meter on to review past results,

start with the meter o, then press and release ▼.

Every time you turn your meter on, a start-up test screen will appear for two seconds. All segments of the display should appear

briey on the start-up test screen to tell you that the meter is working properly. To check that all display segments are working, as

soon as the start-up test screen appears, press and hold ▲to keep the start-up test screen display on. Release ▲to proceed to the

next step. If the meter does not power on, try changing the meter battery. See Replacing the battery in Section 6.

Turning your meter o

There are several ways to turn your meter o:

• Press and hold ▼for two seconds, when reviewing past results.

• Your meter will turn o by itself if left alone for two minutes.

• Before or after completing a test, remove the test strip.

CAUTION: If any information is missing from the

start-up test screen, there may be a problem with the

meter. Call OneTouch® Customer Care 0800 121200 (UK)

or 1800 535676 (Ireland).

Start-up Test Screen

SETTING THE TIME AND DATE, AND CODING YOUR METER

Setting the time and date, and coding your meter

Setting the time and date

Your OneTouch® UltraEasy® Meter comes with the time, date and unit of measurement pre-set. Before using your meter for the rst time

or if you change the meter battery, you should check and update the time and date. Make sure you complete steps 1 to 6 below to ensure

your desired settings are saved.

 Turn the meter on

Press and hold ▼for ve seconds until the start-up test screen appears. After the

start-up test screen, the pre-set time and date will appear on the display for ve

seconds. The hour will now start ashing.

NOTE: If a setting does not need to be updated, simply wait ve seconds.

The meter display will automatically advance to the next setting.

 Set the hour

With the hour ashing on the display, press and release ▲or ▼to go forward or

backward one hour. To move faster, hold the ▲or ▼buttons down.

When the correct hour appears on the display, wait ve seconds. Your entry will be saved

and you will move to the next setting. The minutes will now start ashing.



WARNING: If your display shows mg/dL rather than mmol/L, contact OneTouch® Customer Care 0800 121200 (UK)

or 1800 535676 (Ireland). You cannot change the unit of measurement. Use of the wrong unit of measurement may

cause you to misinterpret your blood glucose level, and may lead to incorrect treatment.

SETTING THE TIME AND DATE, AND CODING YOUR METER

 Set the minutes

Press ▲ or ▼to change the minutes. When you have the correct minutes on the display,

wait ve seconds to move to the next setting. The year (last two digits only), month and day

appear on the display and the year ashes.

 Set the year

Press ▲or ▼to change the year. When you have the correct year on the display, wait

ve seconds to move to the next setting. The month will now start ashing.

 Set the month

Press ▲or ▼to change the month. When you have the correct month on the display, wait

ve seconds to move to the next setting. The day will now start ashing.

 Set the day

Press ▲or ▼to change the day. When you have the correct day on the display, wait ve

seconds to move to the next screen.

Your time and date settings will be displayed for ve seconds. After the ve seconds, the

settings will be saved and the meter will then turn o. If you want to adjust your settings,

press ▲or ▼while the time and date are still on the display. You will be returned to the

rst set-up screen where you can begin with the hour.

SETTING THE TIME AND DATE, AND CODING YOUR METER

Coding your meter

Have these things ready when you test your blood glucose level:

NOTE:

• Use only OneTouch® Ultra® Test Strips with your OneTouch® UltraEasy® Meter.

• Make sure your meter and test strips are about the same temperature before you test.

• Testing must be done within the operating temperature range (6–44°C). For the most accurate results, try to test as close to room

temperature (20–25°C) as you can.

 Insert a test strip to turn on the meter

Start with the meter o. If you have turned the meter on to change settings or review past results, turn it o.

Remove a test strip from its vial. With clean, dry hands, you may touch the test strip anywhere on its surface.

Do Not bend, cut or modify the test strips in any way. Use each test strip immediately after removing it from

the vial.

Hold the meter as shown and insert the test strip into the test port. Make sure the three contact bars are facing

you. Push the test strip in as far as it will go. Do Not bend the test strip.

CAUTION: The test strip vial contains drying agents that are harmful if inhaled or swallowed

and may cause skin or eye irritation.

CAUTION: If you cannot test due to a problem with your testing supplies, contact your healthcare professional or OneTouch® Customer

Care 0800 121200 (UK) or 1800 535676 (Ireland). Failure to test could delay treatment decisions and lead to a serious medical condition.

Check the code on the test strip vial before inserting the test strip

Code numbers are used to calibrate your meter with the test strips you are using to obtain accurate test results.

You must code the meter before using it for the rst time and then every time you change to another vial of

test strips.

• OneTouch® UltraEasy® Meter

• OneTouch® Ultra® Test Strips

• Lancing device

• Sterile lancets with protective disks

• OneTouch® Ultra® Control Solution

SETTING THE TIME AND DATE, AND CODING YOUR METER

CAUTION: OneTouch® Ultra® Test Strips are for single use only. Never re-use a test strip that had either blood or control

solution applied to it.

After the start-up test screen appears, the meter will display the code from your

last test. If a constant and a ashing “––” appear instead of a code number,

such as when you are rst using the meter, follow the instructions in step 3 to

change to a numerical code.

 Match the code on the meter with the code on the test strip vial

If the code on the meter does not match the code on the test strip vial, press ▲or ▼to match the

code number on the test strip vial. The new code number will ash on the display for three seconds,

and then stay constant for three seconds. The display will advance to the screen with the ashing blood

drop icon R.

If the codes already match, wait three seconds. The display will advance to the

screen with the ashing blood drop icon R. The meter is now ready to perform a

blood glucose test.

NOTE:

• If the screen with the ashing blood drop icon Rappears before you are sure the codes match, remove the test strip, wait until

the meter turns o, then re-start from step 1 in Coding your meter.

• If you press ▲by mistake so that the control solution test symbol CtL appears on the display, press ▲again to change it back to

the screen with the ashing blood drop icon R.

CAUTION: Matching the code on the meter and the code on the test strip vial is essential to obtain accurate results. Each

time you test, check to make sure the code numbers match.

Andere Handbücher für UltraEasy

Inhaltsverzeichnis

Andere OneTouch Blutzuckermessgerät Handbücher

OneTouch

OneTouch ULTRALINK - ADDENDUM Bedienungsanleitung

OneTouch

OneTouch VerioFlex Bedienungsanleitung

OneTouch

OneTouch VitA Bedienungsanleitung

OneTouch

OneTouch Verio Flex Bedienungsanleitung

OneTouch

OneTouch Verio Flex Bedienungsanleitung

OneTouch

OneTouch Delica Plus Bedienungsanleitung

OneTouch

OneTouch Verio Bedienungsanleitung

OneTouch

OneTouch ONETOUCH ULTRASMART Bedienungsanleitung

OneTouch

OneTouch ONETOUCH SURESTEP (WITH DATA PORT) Bedienungsanleitung

OneTouch

OneTouch ONETOUCH ULTRASMART Bedienungsanleitung

OneTouch

OneTouch VitA Bedienungsanleitung

OneTouch

OneTouch ONETOUCH SELECT - CONTROL SOLUTION Sicherheitsleitfaden

OneTouch

OneTouch SURESTEP Bedienungsanleitung

OneTouch

OneTouch Vario Flex Bedienungsanleitung

OneTouch

OneTouch Verio Bedienungsanleitung

OneTouch

OneTouch ULTRA2 Bedienungsanleitung

OneTouch

OneTouch Verio Flex Bedienungsanleitung

OneTouch

OneTouch UltraMini Bedienungsanleitung

OneTouch

OneTouch Verio Flex Bedienungsanleitung

OneTouch

OneTouch UltraMini Bedienungsanleitung

OneTouch

OneTouch Verio Reflect Bedienungsanleitung

OneTouch

OneTouch VitA Bedienungsanleitung

OneTouch

OneTouch Verio Flex Bedienungsanleitung

OneTouch

OneTouch Verio Bedienungsanleitung

Beliebte Blutzuckermessgerät Handbücher anderer Marken

ReliOn

ReliOn Prime Bedienerhandbuch

AgaMatrix

AgaMatrix Presto Bedienungsanleitung

Polymer Technology Systems

Polymer Technology Systems A1C Now Self Check Bedienungsanleitung

Medisana

Medisana GlucoDock Bedienungsanleitung

Arkray

Arkray ASSURE PLATINUM Bedienungsanleitung

Dexcom

Dexcom G4 Professional Bedienungsanleitung

Acon

Acon On Call Bedienungsanleitung

veri-Q

veri-Q BALANCE PRO Bedienungsanleitung

Medisana

Medisana MediTouch 2 Bedienungsanleitung

Infopia

Infopia Element Bedienungsanleitung

Abbott

Abbott Optimum Xceed Bedienungsanleitung

Contour

Contour TS Bedienungsanleitung

LabStyle

LabStyle Dario Bedienungsanleitung

ACONLABS

ACONLABS ON CALL EXPRESS Bedienungsanleitung

Higi Technology

Higi Technology iGlucose Bedienungsanleitung

Bayer HealthCare

Bayer HealthCare CONTOUR NEXT Bedienungsanleitung

Accu-Chek

Accu-Chek ADVANTAGE Bedienungsanleitung

Sanofi-aventis

Sanofi-aventis BG STAR Technische Daten