Onkyo TX-8270 Bedienungsanleitung

TX-8270

NETWORK STEREO RECEIVER

Instruction Manual

Mode d’emploi

Manual de instrucciones

Manuale di istruzioni

Bedienungsanleitung

Gebruikershandleiding

Grundläggande bruksanvisning

Before Start

Table of Contents

Before Start ............................................................2

What's in the box .....................................................3

Part Names ............................................................4

Part Names .............................................................4

Install ......................................................................9

Step1: Speaker Layout ............................................9

Step2: Connect the Speakers ............................... 10

Step3: Connect the TV & AV Components ............ 11

Initial Setup ..........................................................17

Initial Setup with Auto Start-up Wizard ..................17

Playback ..............................................................19

AV Component Playback ......................................19

BLUETOOTH

Playback ......................................20

Internet Radio .......................................................21

Spotify ...................................................................23

AirPlay

.................................................................24

USB Storage Device .............................................25

Listening To the AM/FM Radio (AM: North American

models only) ..........................................................26

Listening to DAB Digital Radio (European models

only) ...................................................................... 29

Music Server .........................................................31

Multi-zone .............................................................33

Supplementary information for player functions ....34

Advanced Setup ..................................................35

Setup Menu ...........................................................35

AUDIO Menu .........................................................46

Web Setup ............................................................48

Firmware Update ..................................................49

Supplementary Information ...............................52

Supplementary Information ...................................52

Others ..................................................................53

Troubleshooting ....................................................53

General Specifications ..........................................58

Reference Information ..........................................60

> Before Start > Part Names > Install > Initial Setup > Playback

Advanced Setup | Supplementary Information | Others

What's in the box

1. Main unit (1)

2. Remote controller (RC-903S) (1), batteries (AAA/R03)

(2)

3. Power cord (1)

4. FM indoor antenna (For North American models only) (1)

5. AM indoor antenna (For North American models only) (1)

6. DAB/FM antenna (For European models only) (1)

0Quick Start Guide (1)

* This document is an online instruction manual. It is not

included as an accessory.

0Connect speakers with 4 ≠ to 16 ≠ impedance. Note that

when connecting to both SPEAKERS A and B terminals,

connect speakers with 8 ≠ to 16 ≠ impedance to both A

and B.

0The power cord must be connected only after all other

cable connections are completed.

0We will not accept responsibility for damage arising from

the connection of equipment manufactured by other

companies.

0Functionality may be introduced by firmware updates

and service providers may cease services, meaning that

some network services and content may become

unavailable in the future. Furthermore, available services

may vary depending on your area of residence.

0Details on the firmware update will be posted on our

website and through other means at a later date.

0Specifications and appearance are subject to change

without prior notice.

> Before Start > Part Names > Install > Initial Setup > Playback

Advanced Setup | Supplementary Information | Others

Par t Name s

Part Names

Front Panel

1. ÍON/STANDBY button

2. MENU button: Used to display the menu.

MEMORY button: Used to register DAB (European models)/AM (North American

models)/FM radio stations.

3. Play (1)/Pause(;) button: Used for play operations when playing Music Server or USB.

TUNING MODE button (North American models): Switches tuning to an AM/FM station

between automatic tuning and manual tuning.

TUNING MODE button (European models): Switches tuning to an FM station between

automatic tuning and manual tuning, and allows you to select the order for displaying

DAB stations.

4. HYBRID STANDBY indicator: Lights if the unit enters standby mode when the features

are enabled that continue to work when this unit is in standby, such as HDMI Standby

Through and Network Standby.

5. Remote control sensor: Receives signals from the remote controller.

0The signal range of the remote controller is within about 16y/5 m, at an angle of 20° on

the perpendicular axis and 30° to either side.

6. ZONE 2 button: Controls the multi-zone function (P33).

7. OFF button: Switches the multi-zone function off (P33).

8. Display(P5)

9. SETUP button: You can show advanced setting items on the TV and display to provide

you with an even better experience (P35).

10.

Cursors (D / C / B / A), ENTER button: Select the item with the cursors and press

ENTER to confirm. Use them to tune to stations when using TUNER (P26, 29).

11.

RETURN button: Returns the display to the previous state during setting.

12.

VOLUME

13.

PHONES jack: Connect stereo headphones with a standard plug (Ø1/4z/6.3 mm

> Before Start >PartNames > Install > Initial Setup > Playback

Advanced Setup | Supplementary Information | Others









 

    



(European models)

> Before Start >PartNames > Install > Initial Setup > Playback

Advanced Setup | Supplementary Information | Others

diameter).

14.

PURE AUDIO button/LED (European models): Turns

on or off the Pure Audio mode which provides a purer

sound and turns off the display and cuts off analog

video circuits. The LED lights when it is on, the display

turns off, and the "Bass" and "Treble" settings are

disabled.

0Pure Audio mode cannot be selected when using the

Multi-zone feature. Activating the Multi-zone feature

while this mode is selected automatically switches

the listening mode to Direct.

15.

RT/PTY button (European models): Used when

receiving stations transmitting text information.

16.

DIMMER button (North American models): You can

adjust the brightness of the display in three steps. It

cannot be turned off completely.

17.

SPEAKER A/B button: Select the terminals to output

audio from between SPEAKERS A/B.

18.

INPUT dial: Switches the input to be played.

19.

BASS dial: Adjusts the bass.

20.

TREBLE dial: Adjusts the treble.

21.

BALANCE dial: Adjusts the balance of the sounds

output from the left and right speakers.

22.

BGM 1/2/3/4 buttons: Preset your favorite DAB

(European models)/AM (North American models)/FM

radio stations (P27, 30).

23.

USB jack: A USB storage device is connected so that

music files stored in it can be played. You can also

supply power (5 V/1 A) to USB devices with a USB

cable.

Display

1. The currently selected speaker system lights.

2. Lights in the following conditions.

Ë: When headphones are connected

Z2: ZONE 2 is on.

: When connected via BLUETOOTH

: When connected by Wi-Fi

NET: When "NET" is selected with the input selector and the unit is

connected to the network. It will flash if the connection to the network is

not correct.

USB: When "NET" is selected with the input selector and the unit is

connected by USB and the USB device is selected. Flashes if the USB

is not properly connected.

HDMI: HDMI signals are input and the HDMI input selector is selected.

DIGITAL: Digital signals are input and the digital input selector is

selected.

3. Lights according to the type of input digital audio signals.

4. Lights in the following conditions.

RDS (European models): Receiving RDS broadcasting.

TUNED: Receiving DAB (European models)/AM (North American

models)/FM radio

FM ST: Receiving FM stereo.

SLEEP: Sleep timer has been set.

AUTO STBY: Auto Standby has been set.

5. Flashes when muting is on.

6. Speaker/Channel display: Displays the output channel of the

speakers.

7. This may light when performing operations with the "NET" input

selector.

8. Displays various information of the input signals.







Rear Panel

1. DIGITAL IN OPTICAL/COAXIAL jacks: Input TV or AV component digital audio signals

with a digital optical cable or digital coaxial cable.

2. ETHERNET jack: Connect to the network with an Ethernet cable.

3. USB jack: A USB storage device is connected so that music files stored in it can be

played. You can also supply power (5 V/500 mA) to USB devices with a USB cable.

4. Wireless antenna: Raise for Wi-Fi connection or when using a BLUETOOTH wireless

technology enabled device. Adjust their angles according to the connection status.

5. TUNER AM/FM 75≠ terminals (North American models): The supplied antennas are

connected.

6. HDMI OUT jack: Connect a HDMI cable to transfer video signals and audio signals to a

TV.

7. HDMI IN jacks: Input video signals and audio signals with a HDMI cable connected to an

AV component.

8. REMOTE CONTROL jack: An Onkyo product with RI jack can be connected and

synchronized with this unit (P13).

9. IR IN/OUT terminals: Connected to the multi-room remote control kit. Special devices or

cables are necessary. For more information about preparation, contact the specialized

stores.

10.

AC INLET: Connect the supplied power cord.

11.

GND jack: The ground wire of the turntable is connected.

12.

AUDIO IN jacks: Input AV component audio signals with an analog audio cable.

TUNER DAB/FM terminal (European models): The supplied antenna is connected.

13.

ZONE 2 LINE OUT jacks: Output audio signals with an analog audio cable to a pre-main

amplifier in a separate room (ZONE 2).

14.

SUBWOOFER PRE OUT jacks: Connect a powered subwoofer with a subwoofer cable.

Up to two powered subwoofers can be connected. The same signal is output from each of

> Before Start >PartNames > Install > Initial Setup > Playback

Advanced Setup | Supplementary Information | Others

180°

90°









   













(European models)

> Before Start >PartNames > Install > Initial Setup > Playback

Advanced Setup | Supplementary Information | Others

the SUBWOOFER PRE OUT jacks.

15.

SPEAKERS jacks: Connect speakers with speaker

cables. (North American models are banana plug

ready.) You can connect a set of left and right speakers

to each of the A/B terminals.

Remote Controller

1. ÍON/STANDBY button

2. INPUT SELECTOR buttons: Switches the input to be played.

3. Play buttons: Used to control play of a Music Server or device connected via

USB, or of RI connected devices.

0The , , and buttons can only be used when playing RI connected

devices.

4. REPEAT button: Used for repeat play operations when playing Music Server or

USB. Each time you press the button, the mode switches from (1-track

repeat) to (folder repeat).

5. SPEAKER A/B button: Select the terminals to output audio from between

SPEAKERS A/B.

6. Cursors (D / C / B / A), ENTER button: Select the item with the cursors and

press ENTER to confirm. When the folder or file lists are not shown on one

screen on the TV, press B/A to change the screen.

7. SETUP button: You can show advanced setting items on the TV and display to

provide you with an even better experience (P35).

8. CH (i/j) buttons: Used to select DAB (European models)/AM (North American

models)/FM radio stations.

9. Numbered buttons

10.

DISPLAY button: Switches the information on the display. You can display

information such as the input source, volume, and input format when pressed

repeatedly during play.

11.

DIMMER button: You can adjust the brightness of the display in three steps. It

cannot be turned off completely.

12.

REMOTE MODE MAIN/ZONE 2 buttons: Controls the multi-zone function (P33).

13.

RANDOM button: Used for random play operations when playing Music Server or

USB. Random turns on or off each time you press the button .

14.

MENU button: Used to display the menu.

15.

RETURN button: Returns the display to the previous state during setting.

16.

AUDIO button: Settings such as "Tone" and "Level" can be made quickly during

play on the TV screen (P46).

17.

VOLUME

18.

MUTING button: Temporarily mutes audio. Press again to cancel muting.

19.

CLR button: Deletes all characters you have entered when entering text on the

TV screen.

20.

SLEEP button: Set the sleep timer.









































> Before Start >PartNames > Install > Initial Setup > Playback

Advanced Setup | Supplementary Information | Others

Tips

When the remote controller isn't working: The

remote controller may have switched to the mode

for controlling ZONE 2. Press REMOTE MODE

MAIN to switch to the mode to control the main

room.

Install

Step1: Speaker Layout

Front speakers output front stereo sound. The powered

subwoofer reproduces bass sounds and enriches the

sound field. The optimal positioning for front speakers is ear

height. Placing the powered subwoofer between the front of

the listening position and a front speaker gives you a

natural sound even when playing music. You can connect

one more set of front speakers to this unit to use as a

Speaker B System. In this state, the front speakers 12

become the Speaker A System and you can switch the

same audio to output from A, B, or A+B. Press SPEAKER

A/B on the remote control to switch. The selection changes

in the order SPEAKER A, SPEAKER B, SPEAKER A+B

with each press.

0When connecting to both SPEAKERS A and B terminals,

connect speakers with 8 ≠ to 16 ≠ impedance to both A

and B.

1,2 Front Speakers

3 Powered Subwoofer

> Before Start > Part Names >Install > Initial Setup > Playback

Advanced Setup | Supplementary Information | Others

＊1

Speaker B Speaker B

¢1: 22° to 30°

Step2: Connect the Speakers

Up to two powered subwoofers can be connected. The

same signal is output from each of the SUBWOOFER PRE

OUT jacks. When connecting another set of front speakers

to use as the Speakers B System, connect them to the

SPEAKERS B terminals. Connect using the same method

described for SPEAKERS A. Note that when connecting to

both SPEAKERS A and B terminals, connect speakers with

8 ≠ to 16 ≠ impedance to both A and B.

Connect the speaker cable so the wires do not protrude from the

speaker jacks. If the exposed wires of the speakers touch the

rear panel or the + and - wires touch each other, the protection

circuit will be activated.

> Before Start > Part Names >Install > Initial Setup > Playback

Advanced Setup | Supplementary Information | Others

Speaker B

1/2˝

(12 mm)

a Speaker cable, b Subwoofer cable

Setup

0If a powered subwoofer is not connected, then

after Initial Setup is complete, settings are

required in the Setup menu. Press SETUP on the

remote controller, select "2. Speaker" -

"Configuration" and set "Subwoofer" to "No".

If any of the connected speakers have an

impedance of 4

≠

or more to less than 6

≠

, or when

a Speaker B system is to be used, after completing

Initial Setup, you need to make some settings in the

Setup menu. Press SETUP on the remote

controller, select "2. Speaker" - "Configuration" and

set "Speaker Impedance" to "4ohms".

Andere Handbücher für TX-8270

Inhaltsverzeichnis

Andere Onkyo Stereo-Receiver Handbücher

Onkyo

Onkyo TX-NR696-S Bedienungsanleitung

Onkyo

Onkyo TX-NR616 Gebrauchs- und Pflegehandbuch

Onkyo

Onkyo TX-8255 Bedienungsanleitung

Onkyo

Onkyo TX-SR606 Bedienungsanleitung

Onkyo

Onkyo TX-RZ620 Installationsanleitung

Onkyo

Onkyo TX-NR1000E Bedienungsanleitung

Onkyo

Onkyo TX-NR6100 Bedienungsanleitung

Onkyo

Onkyo TX-SR504 Bedienungsanleitung

Onkyo

Onkyo TX-SR494DAB Bedienungsanleitung

Onkyo

Onkyo TX-NR828(B) Bedienungsanleitung

Onkyo

Onkyo TX-8050 Bedienungsanleitung

Onkyo

Onkyo TX-8050 Bedienungsanleitung

Onkyo

Onkyo K-185X Bedienungsanleitung

Onkyo

Onkyo TX-SV535 Bedienungsanleitung

Onkyo

Onkyo TX-8050 Bedienungsanleitung

Onkyo

Onkyo TX-NR787 Bedienungsanleitung

Onkyo

Onkyo TX-NR6100 Bedienungsanleitung

Onkyo

Onkyo TX-8222 Bedienungsanleitung

Onkyo

Onkyo TX-RZ820 Installationsanleitung

Onkyo

Onkyo TXNR905 - AV Network Receiver Gebrauchs- und Pflegehandbuch

Onkyo

Onkyo TX-NR6100 Handbuch

Onkyo

Onkyo TX-RZ730 Bedienungsanleitung

Onkyo

Onkyo TX-SR501 Bedienungsanleitung

Onkyo

Onkyo TX-NR929 Bedienungsanleitung

Beliebte Stereo-Receiver Handbücher anderer Marken

Marantz

Marantz CINEMA 70S Bedienungsanleitung

Kenwood

Kenwood KMDX92 Bedienungsanleitung

Yamaha

Yamaha RX-830 Bedienungsanleitung

Pioneer

Pioneer AVH-Z7250BT Bedienungsanleitung

Yamaha

Yamaha RX-750 Bedienungsanleitung

Denon

Denon AVR-1311 Bedienungsanleitung

Denon

Denon AVR-S760H Bedienungsanleitung

Denon

Denon AVR-X7200W Bedienungsanleitung

Pioneer

Pioneer SC-LX904 Handbuch

Sony

Sony XAV-1500 Bedienungsanleitung

Radio Shack

Radio Shack DX-399 Bedienungsanleitung

Sony

Sony STR-DE535 - Fm Stereo/fm-am Receiver Bedienungsanleitung

Pioneer

Pioneer SX-1000TA Bedienungsanleitung

Yamaha

Yamaha MusicCast TSR-5B3D Bedienungsanleitung

Sony

Sony STR-DE335 - Fm Stereo/fm-am Receiver Bedienungsanleitung

Sony

Sony STR-DG500 - Multi Channel Av Receiver Bedienungsanleitung

Panasonic

Panasonic AJSD955B - DVCPRO50 STUDIO DECK Bedienungsanleitung

Pioneer

Pioneer SX-838 Bedienungsanleitung