Opera PRIMA Bedienungsanleitung
INSTALLATION INSTRUCTIONS
PRIMA AND CLASSICA
PRIMA PRIMA OP PRIMA MAXI
CLASSICA
2
2
WARNINGS
Please read the following instructions carefully.
The warnings in this manual must be observed in conjunction with the USER
MANUAL. Read and keep this manual in its entirety for the life of the product,
including proof of purchase and warranty (USER MANUAL).
Use only supplied or recommended products.
Thoroughly clean the work area of dust and shavings before installation.
Do not expose the product to water, weather, high temperatures or strong
electromagnetic �elds. Do not install in explosive environments or in the
presence of flammable vapours: safety hazard.
Entrust the installation of the electrical part to experienced personnel.
Do not make modi�cations or repair to the electrical or electronic components.
Check for proper grounding when connecting to the power supply.
Disposal of packaging in the appropriate containers is recommended.
For further information:
www.opera-italy.com
Tel: +39 059 451708
e-mail: [email protected]
3
3
TECHNICAL SPECIFICATIONS AND DIMENSIONS:
• PRIMA series 4
• PRIMA MAXI series 5
• PRIMA OP series 6
• CLASSICA series 7
INSTALLATION 8
ANTI-REBOUND BALL-CATCH ADJUSTMENT (SA / PRIMA MAXI version) 9
SPRING LATCH REVERSIBILITY (item 25900 / 25910 ONLY) 13
TIMING ADJUSTMENT 14
TABLE OF FUNCTIONS 16
APPLICATION EXAMPLES 19
SAMPLE CONNECTION FOR APARTMENT BUILDING DOOR 20
BASIC INTERLOCKING DIAGRAM 21
TROUBLESHOOTING 22
TABLE OF CONTENTS
OPERA s.r.l. - all rights reserved
4
TECHNICAL SPECIFICATIONS AND DIMENSIONS - PRIMA series
23
14
25
8
8
23
320
101.5
176.5
20.5
15
33
20
3
25/30/
35/60
38/43/
48/73
UPRIGHT SECURITY SOLENOID LOCK
› Stainless steel face plate and striking plate, hardened steel deadbolt/spring latch
› Versions with fail-safe or fail-secure deadbolt/spring latch
› Power supply: 12 ÷ 24 Vdc, peak current 3 A, holding current 130 ÷ 230 mA
› Ready for interlocking between 2 or more doors
› Opto-electronic control of deadbolt / spring latch position
› Electronic control (can be disabled) of reclosing timings
› Anti-rebound alignment ball (optional)
14
25
8
23
360
96.5
23
8
25
4.5
4.5
4.5
150
12
12
55
OP57036/38 Striking plate
5
3
23
83
5
TECHNICAL SPECIFICATIONS AND DIMENSIONS - PRIMA MAXI series
30
16
9
9
26.5
26.5
440
151.5
30
4
45
57
85
325
23
10
10
440
151.5
210
30
Striking plate
6
4
23
108
UPRIGHT SECURITY SOLENOID LOCK
› Stainless steel face plate and striking plate, hardened steel deadbolt
› Versions with fail-safe or fail-secure deadbolt
› Power supply: 12 ÷ 24 Vdc, peak current 3 A, holding current 130 ÷ 230 mA
› Ready for interlocking between 2 or more doors
› Opto-electronic control of deadbolt position
› Electronic control (can be disabled) of reclosing timings
› Anti-rebound alignment ball
6
TECHNICAL SPECIFICATIONS AND DIMENSIONS - PRIMA OP series
25
4.5
4.5
4.5
150
12
12
55
215
20
3
25/30/35
35/40/45
15
15
25
23
14
8
8
23
320
97
Striking plate
5
3
UPRIGHT SECURITY SOLENOID LOCK
› Stainless steel face plate and striking plate, hardened steel deadbolt/spring latch
› Versions with fail-safe or fail-secure deadbolt/spring latch
› Power supply: 12 ÷ 24 Vdc, peak current 3 A, holding current 130 ÷ 230 mA
› Ready for interlocking between 2 or more doors
› Opto-electronic control of deadbolt / spring latch position
› Electronic control (can be disabled) of reclosing timings
7
TECHNICAL SPECIFICATIONS AND DIMENSIONS - CLASSICA series
77
28
3
210
157
90
70
20
160
76.5
10
10
25
240
115.7
23
23
8
25
OP54036/38
266/268
276/278
25
13
160
13
90
30
25
4.5
4.5
150
12
12
55
Striking plate
HORIZONTAL SECURITY SOLENOID LOCK
› Stainless steel face plate and striking plate, hardened steel deadbolt/spring latch
› Versions with fail-safe or fail-secure deadbolt/spring latch
› Power supply: 12 ÷ 24 Vdc, peak current 3 A, holding current 130 ÷ 230 mA
› Ready for interlocking between 2 or more doors
› Opto-electronic control of deadbolt / spring latch position
› Electronic control (can be disabled) of reclosing timings
› Anti-rebound alignment ball (optional)
8
8
INSTALLATION
CAUTION : do not �le or drill holes in the �xture with the solenoid bolt
installed. Do not use the solenoid bolt as a drilling template. Risk of
damage or jamming of the internal mechanics due to dust and/or shavings.
Do not weld or solder the striking plate to the door frame.
Do not use non-direct connection systems (eg. spring contacts) to pass the
connecting wires through: use a cable cover (e.g. item 08600).
20
4.5
4.5
4.5
150
12
12 55
35
45
Drilling dimensions for striking plates
Supplied in package (standard)
1
(1) Drill holes for inserting the striking plate according to the diagram shown here.
The striking plate is essential for the operation of the solenoid lock.
Solenoid lock Striking plate Connector Cylinder screw
26
440
230
10
10
60
125
50
PRIMA /
PRIMA OP /
CLASSICA
PRIMA MAXI
9
9
(2) Install the striking plate using appropriate screws (not supplied).
Pay attention to the orientation of the magnet: it must be installed wall side
and below the deadbolt axis, otherwise the solenoid bolt will not work.
max 6 mm
Magnet
2
ANTI-REBOUND BALL-CATCH ADJUSTMENT (SA / PRIMA MAXI version)
(1)Adjust the ball-catch strength by turning the rear ring nut while holding
the threaded portion steady until the optimum holding strength is reached.
(2) Checking that the screw on the striking plate is in the “unlocked” position,
adjust the ball-catch protrusion by turning the rear ring nut relative to the
striking plate. (3) When the adjustement is �nished, lock the thread by turning
the screw on the striking plate 90° clockwise.
Continues…
PRIMA MAXI
PRIMA / P. OP /
CLASSICA
“Unlocked” screw
If installed on ferro-
magnetic frames leave
at least 1-2 mm clearance
around the magnet.
90°
1 2 3
10
Installation on door frame: if the handle function is not necessary, the
solenoid bolt can be installed on the door frame. The use of a cable cover for
connecting wires is not required in this case.
In case the handle is required, the solenoid bolt must be mounted on
the door, using an appropriate cable cover (e.g. item 08600).
(67/87)
(67/87)
154
105
23
42
27.5
27.5
10
10
(3)Drill holes for the installation of the solenoid bolt according to the diagram
corresponding to the product to be installed.
Thoroughly clean the inside of the casing from chips and dirt.
PRIMA
CLASSICA
45.5
33
23
255
32.5
32.5
8
8
23
23
14
3
Drilling dimensions for solenoid locks
(22/27/32/60)
176.5
Andere Handbücher für PRIMA
1
Dieses Handbuch passt für folgende Modelle
3
Inhaltsverzeichnis
Andere Opera Sperren Handbücher
