Optex OA-PRESENCE TN Bedienungsanleitung

The actual detection area may become smaller depending on the ambient light, the color / material of

the object or the floor as well as the entry speed of the object.

The sensor may not be activated when the entering speed of the object or a person is slower than

50mm / sec. or faster than 1500mm / sec.

NOTE

Mounting height : 2.2m(7'3")

Angle adjustment : +6°

Sensitivity : Middle

: Emitting spots

: Detection area

: Emitting spots

(can be eliminated)

Test conditions required by EN 16005

Floor :Grey paper

Detection object : EN 16005 CA reference body

Sensitivity : Middle

Speed of detection object : 50mm / sec.

To comply with EN 16005, make sure that the detection area is within the values of the chart below.

Detectionarea

The chart shows the values at depth angle +6°

Emitting area

2.20 (7'3")2.00 (6'7")

0.25 (10")

1.12 (3'8")

2.65 (8'8")

3.00 (9'10")

0.34 (1'1")

1.53 (5')

3.60 (11'10")

0.23 (9")

1.02 (3'4")

2.41 (7'11")

The values above are those of the Detection area when tested referring to the test conditions of EN 16005.

(The emitting area is as shown in Emitting area above.)

*: When installed at higher than 3.0m(9'10"), EN 16005 requirements are fulfilled only within the area width "G"

of 3.6m(11'10").

[m(feet,inch)]

1.0

(3′3")

1.0(3′3")

1.0

(3′3")

2.0

(6′7")

2.0

(6′7")

2nd row

2.20 (7'3")

0.25 (10")

0.39 (1'3")

0.65 (2'2")

1.33 (4'4")

2.70 (8'10")

0.31 (1')

3.00 (9'10")

0.34 (1'1")

0.48(1'7")

0.80 (2'7")

0.53 (1'9")

0.89 (2'11")

1.63 (5'4") 1.81 (5'11")

2.50 (8'2")

0.28 (11")

0.44 (1'5")

0.74 (2'5")

1.51(4'11")

2.00 (6'7")

0.23 (9")

0.35 (1'2")

0.59 (1'11")

1.21 (3'12")

2.05 (6'9") 2.51 (8'3") 2.79 (9'2")2.32 (7'7")1.86 (6'1")

G 2.78 (9'1") 3.40 (11'2") 3.79 (12'5")

3.50 (11'6")

0.39 (1'3")

0.61 (2')

1.03(3'5")

2.11 (6'11")

3.25 (10'8")

4.42 (14'6")3.15 (10'4")2.52(8'3")

[m(feet,inch)]

Mounting

surface

1st row

OA-PRESENCE TN

DETECTION AREA

Model

Cover color

Mounting height

Detection area

Detection method

Depth angle adjustment

Power supply (*1)

Power consumption

Operation indicator

Safety input

Safety output

Operating temperature

: OA-PRESENCE TN

: Silver / Black

: 2.0 (6'7") to 3.5m (11'6")

: See DETECTION AREA

: Active infrared reflection

: -6 to +6°

: 12 to 24VAC ±10% (50 / 60Hz)

12 to 30VDC ±10%

: < 1W (< 2 VA at AC)

: See Operation indicator table

: Opto coupler

Voltage 5 to 30VDC

Current 6mA Max. (30VDC)

: Opto coupler (NPN)

Voltage 5 to 50VDC

Current 100mA Max.

Dark current 600nA Max.

(Resistance load)

: -20 to +55°C (-4 to 131°F)

The specifications herein are subject to change without prior notice due to improvements.

NOTE

Operation indicator table

*1 : The sensor has to be connected to a door system which has a SELV circuit.

*2 : Overcurrent protection with less than 2A.

Operating humidity

Noise level

Output hold time

Response time

IP rate

Category

Performance level

ESPE

Weight

Accessories

: < 80%

: < 70dBA

: < 0.5sec.

: < 0.3sec.

: IP54

: 2 (EN ISO13849-1:2015)

: d (EN ISO13849-1:2015)

: Type 2

: 250g (8.8oz )

: 1 Operation manual

2 Mounting screws

1 Mounting template

1 Area adjustment tool

1 Cable 3m (9'10")

( 8×0.22mm² AWG24 ) (*2)

1sec. 1sec.

Stand-by (Installation mode)

Stand-by (Operation mode)

Setting error

Signal saturation

Sensor failure

1st row detection

2nd row detection

Status

Green

Red & Green blinking

Slow Green blinking

Fast Green blinking

Yellow

Red

Operation indicator color

Red blinking

OA-PRESENCE TN

SPECIFICATIONS

38(1 1/2")

61(2 3/8")

267(10 1/2")

125(4 15/16")

36(1 7/16") 43(1 11/16")

7.5(5/16")

[mm (inch)]

OA-PRESENCE TN

DETECTION AREA

Andere Optex Sicherheitssensor Handbücher

Optex

Optex Smart Line Series Bedienungsanleitung

Optex

Optex AIR-SLIDE T Bedienungsanleitung

Optex

Optex Boundary Gard BX-80N Handbuch

Optex

Optex RXC-DT-X5 Bedienungsanleitung

Optex

Optex AX-70TN Bedienungsanleitung

Optex

Optex VX-402R Bedienungsanleitung

Optex

Optex VX-402 Bedienungsanleitung

Optex

Optex VX SHIELD Series Bedienungsanleitung

Optex

Optex VX Infinity Series Bedienungsanleitung

Optex

Optex AX-100TFR Series Bedienungsanleitung

Optex

Optex WX Shield Series Bedienungsanleitung

Optex

Optex HX-80N Bedienungsanleitung

Optex

Optex VX-402R Bedienungsanleitung

Optex

Optex URX-P01 Bedienungsanleitung

Optex

Optex WX Infinity Series Bedienungsanleitung

Optex

Optex VX SHIELD Series Bedienungsanleitung

Optex

Optex SX-360Z Bedienungsanleitung

Optex

Optex AX100 Bedienungsanleitung

Optex

Optex REDSCAN Series Bedienungsanleitung

Optex

Optex AX-330PLUS Bedienungsanleitung

Optex

Optex FASTUS CD22-15 Series Bedienungsanleitung

Optex

Optex FX-50QZ Bedienungsanleitung

Optex

Optex CX-702 MKII Bedienungsanleitung

Optex

Optex ELITE T Bedienungsanleitung

Beliebte Sicherheitssensor Handbücher anderer Marken

THORLABS

THORLABS PDA10JT Bedienungsanleitung

Waeco

Waeco UV-DETECT Bedienungsanleitung

Intermatic

Intermatic IOS-DSIMF Bedienungsanleitung

urmet domus

urmet domus 1083 Bedienungsanleitung

Siemens

Siemens AZL66 Series Bedienungsanleitung

BTI

BTI Profiline Multi Finder Bedienungsanleitung

Challenger

Challenger SL01 Bedienungsanleitung

DMP Electronics

DMP Electronics 1122INT Bedienungsanleitung

Rielta

Rielta Ladoga MK-RK Bedienungsanleitung

Mirion Technologies

Mirion Technologies ACCURAD PRD Bedienungsanleitung

Bosch

Bosch DS835 Bedienungsanleitung

DBI SALA

DBI SALA EZ Stop Bedienerhandbuch

Lamptime

Lamptime ST05C Bedienungsanleitung

Ubiquiti

Ubiquiti MFI-MSC Bedienungsanleitung

Subsite

Subsite 910R Montageanleitung

Satel

Satel OPAL Pro Bedienungsanleitung

Aleph

Aleph XC-1XTEU Bedienungsanleitung

Pima

Pima LARIS QUAD Bedienungsanleitung