Optiquest VS12118 Bedienungsanleitung

Q91b

LCD Display

Model No. : VS12118

IMPORTANT: Please read this User Guide to obtain important

information on installing and using your product in a safe manner, as

well as registering your product for future service. Warranty information

contained in this User Guide will describe your limited coverage from

ViewSonic Corporation, which is also found on our web site at http://

www.viewsonic.com in English, or in specific languages using the

Regional selection box in the upper right corner of our website.

“Antes de operar su equipo lea cuidadosamente las instrucciones en

este manual”

Optiquest Q91b

Contents

TCO Information.......................................................................................... i

Compliance Information.............................................................................. 1

Important Safety Instructions...................................................................... 2

Declaration of RoHS Compliance............................................................... 3

Product Registration................................................................................... 4

Before you operate the monitor

Features ..................................................................................................... 5

Checking the contents of the package ....................................................... 5

Installation instructions ............................................................................... 6

Power ......................................................................................................... 6

Making connections.................................................................................... 7

Adjusting the viewing angle ........................................................................ 8

Operating instructions

General instructions.................................................................................... 9

Front panel control.................................................................................... 10

How to adjust a setting ............................................................................. 11

Plug and play............................................................................................ 14

Other Information

Specifications ........................................................................................... 15

Troubleshooting........................................................................................ 16

Customer Support .................................................................................... 17

Cleaning the LCD Display ........................................................................ 18

Limited Warranty ...................................................................................... 19

Mexico Limited Warranty .......................................................................... 21

Optiquest Q91b i

TCO Information

Congratulations!

The display you have just purchased carries the TCO’03 Displays

label. This means that your display is designed, manufactured and

tested according to some of the strictest quality and environmental

requirements in the world. This makes for a high performance

product, designed with the user in focus that also minimizes the

impact on our natural environment.

Some of the features of the TCO’03 Display requirements:

Ergonomics

Good visual ergonomics and image quality in order to improve the working environment for

the user and to reduce sight and strain problems. Important parameters are luminance, contrast,

resolution, reflectance, colour rendition and image stability.

Energy

• Energy-saving mode after a certain time - beneficial both for the user and the environment

• Electrical safety

Emissions

• Electromagnetic fields

• Noise emissions

Ecology

• The product must be prepared for recycling and the manufacturer must have a certified

environmental management system such as EMAS or ISO 14000

• Restrictions on

a. chlorinated and brominated flame retardants and polymers

b. heavy metals such as cadmium, mercury and lead.

The requirements included in this label have been developed by TCO Development in co-

operation with scientists, experts, users as well as manufacturers all over the world. Since the

end of the 1980s TCO has been involved in influencing the development of IT equipment in a

more user-friendly direction. Our labelling system started with displays in 1992 and is now

requested by users and IT-manufacturers all over the world.

For more information, please visit

www.tcodevelopment.com

Optiquest Q91b 1

Compliance Information

For U.S.A.

This device complies with part 15 of FCC Rules. Operation is subject to the following two

conditions: (1) this device may not cause harmful interference, and (2) this device must accept

any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates,

uses, and can radiate radio frequency energy, and if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications. However, there is

no guarantee that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be determined by turning

the equipment off and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

• Consult the dealer or an experienced radio/TV technician for help.

Warning: You are cautioned that changes or modifications not expressly approved by the

party responsible for compliance could void your authority to operate the equipment.

For Canada

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

CE Conformity for European Countries

The device complies with the requirements of the EEC directive 89/336/EEC,

2004/108/EEC as amended by 92/31/EEC and 93/68/EEC Art.5 with regard to

"Electromagnetic compatibility", and 73/23/EEC as amended by 93/68/EEC

Art.13 with regard to "Safety."

Following information is only for EU-member states:

The mark shown to the right is in compliance with the Waste Electrical and

Electronic Equipment Directive 2002/96/EC (WEEE).

The mark indicates the requirement NOT to dispose the equipment as unsorted

municipal waste, but use the return and collection systems according to local law.

Optiquest Q91b 2

Important Safety Instructions

1. Read these instructions completely before using the equipment.

2. Keep these instructions in a safe place.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this equipment near water. Warning: To reduce the risk of fire or electric shock,

do not expose this apparatus to rain or moisture.

6. Clean with a soft, dry cloth. If further cleaning is required, see “Cleaning the Display” in

this guide for further instructions.

7. Do not block any ventilation openings. Install the equipment in accordance with the

manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other

devices (including amplifiers) that produce heat.

9. Do not attempt to circumvent the safety provisions of the polarized or grounding-type

plug. A polarized plug has two blades with one wider than the other. A grounding type

plug has two blades and a third grounding prong. The wide blade and the third prong are

provided for your safety. If the plug does not fit into your outlet, consult an electrician for

replacement of the outlet.

10. Protect the power cord from being tread upon or pinched, particularly at the plug, and the

point where if emerges from the equipment. Be sure that the power outlet is located near

the equipment so that it is easily accessible.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table specified by the

manufacturer, or sold with the equipment. When a cart is used, use caution

when moving the cart/equipment combination to avoid injury from tipping

over.

13. Unplug this equipment when it will be unused for long periods of time.

14. Refer all servicing to qualified service personnel. Service is required when the unit has

been damaged in any way, such as: if the power-supply cord or plug is damaged, if liquid

is spilled onto or objects fall into the unit, if the unit is exposed to rain or moisture, or if

the unit does not operate normally or has been dropped.

Optiquest Q91b 3

Declaration of RoHS Compliance

This product has been designed and manufactured in compliance with Directive 2002/95/EC of

the European Parliament and the Council on restriction of the use of certain hazardous

substances in electrical and electronic equipment (RoHS Directive) and is deemed to comply

with the maximum concentration values issued by the European Technical Adaptation

Committee (TAC) as shown below:

Certain components of products as stated above are exempted under the Annex of the RoHS

Directives as noted below:

Examples of exempted components are:

1. Mercury in compact fluorescent lamps not exceeding 5 mg per lamp and in other lamps not

specifically mentioned in the Annex of RoHS Directive.

2. Lead in glass of cathode ray tubes, electronic components, fluorescent tubes, and electronic

ceramic parts (e.g. piezoelectronic devices).

3. Lead in high temperature type solders (i.e. lead-based alloys containing 85% by weight or

more lead).

4. Lead as an allotting element in steel containing up to 0.35% lead by weight, aluminium

containing up to 0.4% lead by weight and as a cooper alloy containing up to 4% lead by

weight.

Substance Proposed Maximum Concentration Actual Concentration

Lead (Pb) 0.1% < 0.1%

Mercury (Hg) 0.1% < 0.1%

Cadmium (Cd) 0.01% < 0.01%

Hexavalent Chromium (Cr6+)0.1% < 0.1%

Polybrominated biphenyls (PBB) 0.1% < 0.1%

Polybrominated diphenyl ethers (PBDE) 0.1% < 0.1%

Optiquest Q91b 4

Macintosh and Power Macintosh are registered trademarks of Apple Computer, Inc.

Microsoft, Windows, Windows NT, and the Windows logo are registered trademarks of

Microsoft Corporation in the United States and other countries.

ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered

trademarks of ViewSonic Corporation.

VESA is a registered trademark of the Video Electronics Standards Association. DPMS and

DDC are trademarks of VESA.

ENERGY STAR®is a registered trademark of the U.S. Environmental Protection Agency (EPA).

As an ENERGY STAR®partner, ViewSonic Corporation has determined that this product meets

the ENERGY STAR®guidelines for energy efficiency.

Disclaimer: ViewSonic Corporation shall not be liable for technical or editorial errors or

omissions contained herein; nor for incidental or consequential damages resulting from

furnishing this material, or the performance or use of this product.

In the interest of continuing product improvement, ViewSonic Corporation reserves the right

to change product specifications without notice. Information in this document may change

without notice.

No part of this document may be copied, reproduced, or transmitted by any means, for any

purpose without prior written permission from ViewSonic Corporation.

Product Registration

To meet your future needs, and to receive any additional product information as it becomes

available, please register your product on the Internet at: www.viewsonic.com. The ViewSonic

Wizard CD-ROM also provides an opportunity for you to print the registration form, which

you may mail or fax to ViewSonic.

Product disposal at end of product life

The lamp in this produc contains mercury. Please dispose of in accordance with local, state or

federal laws.

ViewSonic is concerned about the preservation of our environment. Please dispose of this

product properly at the end of its useful life. For the recycling information, please refer to our

website:

1. USA: www.viewsonic.com/pdf/RecyclePlus.pdf

2. Europe: www.viewsoniceurope.com

3. Taiwan: recycle.epa.gov.tw

For Your Records

Product Name:

Model Number:

Document Number:

Serial Number:

Purchase Date:

Q91b

Optiquest 19” LCD Display

VS12118

Q91b-1_UG_ENG Rev. 1A 10-26-07

______________________________

Optiquest Q91b 5

BEFORE YOU OPERATE THE MONITOR

FEATURES

•19” TFT Color LCD Monitor

•Crisp, Clear Display for Windows

•Recommended Resolutions: 1280 X 1024

•EPA ENERGY STAR®

•Ergonomic Design

•Space Saving, Compact Case Design

CHECKING THE CONTENTS OF THE PACKAGE

The product package should include the following items:

LCD Monitor

(Reference only, the real feature is depended on selected model)

Screen Base

Cables and User manual

Power Cord VGA Cable Audio Cable

User’s manual Quick Start Guide

Optiquest Q91b 6

INSTALLATION INSTRUCTIONS

Install Remove

Figure.1. Installing and Removing the Base

INSTALLATION:

1. Align the monitor with the opening in the base.

2. Note that the longer section of the base points forward.

3. Snap the monitor into its base. A clear click sound will affirm that the base is

connected correctly.

4. Verify that the monitor is securely attached to the base by looking at the bottom of

the base and making sure that the clips are fully engaged in the base.

REMOVAL:

1. Flip over the monitor so that it is upside down.

2. Press the 2 clips on the base that holds the monitor in place.

3. Gently press and hold the 2 clips while pulling the base from the monitor unit they are

unattached.

POWER

POWER SOURCE:

1. Make sure that the power cord is the correct type required in your area.

2. This LCD monitor has an Internal universal power supply that allows operation in

either 100/120V AC or 220/240V AC voltage area (No user adjustment is

required.)

3. Connect the AC-power cord one end to your LCD monitor’s AC-input socket, the

other end to wall-outlet .

Optiquest Q91b 7

MAKING CONNECTIONS

CONNECTING TO A PC:

Turn off your computer before performing the procedure below.

1. Connect one end of the D-Sub cable to the back of the monitor and connect the

other end to the computer’s D-Sub port.

2. Connect one end of the DVI-D cable (Dual input mode optional) to the back of the

monitor and connect the other end to the computer’s DVI-D port.

3. Connect the audio cable between the monitor's audio input and the PC's audio

output (green port).

4. Plug one end of the AC power cord to the LCD monitor’s AC input socket, and the

other end to Wall outlet.

5. Turn on your monitor and computer.

Figure.2. Connecting to a PC

1. Audio Input 2. VGA Input

3. DVI-D Input (optional) 4. Power AC Input

234 1

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Optiquest Monitor Handbücher

Optiquest

Optiquest Optiquest V55 Bedienungsanleitung

Optiquest

Optiquest VS12108 Kurzanleitung

Optiquest

Optiquest Q22wb-1 Bedienungsanleitung

Optiquest

Optiquest Q2161WB - Optiquest - 21.6" LCD Monitor Kurzanleitung

Optiquest

Optiquest VS12107 Bedienungsanleitung

Optiquest

Optiquest VS11443 Bedienungsanleitung

Optiquest

Optiquest B240 Bedienungsanleitung

Optiquest

Optiquest B270 Bedienungsanleitung

Optiquest

Optiquest Optiquest VS11455 Bedienungsanleitung

Optiquest

Optiquest VS12106 Bedienungsanleitung

Optiquest

Optiquest Q171WB - Optiquest - 17" LCD Monitor Bedienungsanleitung

Optiquest

Optiquest Q2161WB - Optiquest - 21.6" LCD Monitor Bedienungsanleitung

Optiquest

Optiquest Q241WB - Optiquest - 24" LCD Monitor Bedienungsanleitung

Optiquest

Optiquest Q171B - Optiquest - 17" LCD Monitor Bedienungsanleitung

Optiquest

Optiquest Q171WB - Optiquest - 17" LCD Monitor Bedienungsanleitung

Optiquest

Optiquest Q171B - Optiquest - 17" LCD Monitor Bedienungsanleitung

Optiquest

Optiquest Q2161WB - Optiquest - 21.6" LCD Monitor Bedienungsanleitung

Optiquest

Optiquest Q241WB - Optiquest - 24" LCD Monitor Bedienungsanleitung

Optiquest

Optiquest Optiquest VS11455 Bedienungsanleitung

Optiquest

Optiquest VS12087 Kurzanleitung

Optiquest

Optiquest Q19wb Bedienungsanleitung

Optiquest

Optiquest Q115 - Optiquest - 21" CRT Display Bedienungsanleitung

Optiquest

Optiquest V95-2 Bedienungsanleitung

Optiquest

Optiquest VS12105 Bedienungsanleitung

Beliebte Monitor Handbücher anderer Marken

Linear Acoustic

Linear Acoustic LQ-1000 Bedienungsanleitung

AOC

AOC I2579V Bedienungsanleitung

Gateway

Gateway FPD1520 Bedienungsanleitung

Furuno

Furuno Mu 120c Bedienungsanleitung

Asus

Asus VB171D - 17" LCD Monitor Bedienungsanleitung

Dell

Dell S2230MX Gebrauchsanweisung

Philips

Philips 107C64 Bedienungsanleitung

Dell

Dell S2409WFP Bedienungsanleitung

EverFocus

EverFocus EN-7517E Bedienungsanleitung

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Bedienungsanleitung

Dell

Dell Precision 7680 Bedienungsanleitung

LG 50PM1M - - 50" Plasma Panel Bedienungsanleitung

Bosch

Bosch DDU 9 Bedienungsanleitung

Acer

Acer A231HL Bedienungsanleitung

Philips

Philips 86BDL4152T Bedienungsanleitung

NEC

NEC AccuSync LCD5V Bedienungsanleitung

Emay

Emay SleepO2 Bedienungsanleitung

IBM

IBM 6360 Montageanleitung