OQO 01 Leitfaden

contents start guide

part 1

introduction to the model 01 02

part 2

powering up

part 3

using the thumb keyboard and TrackStik

part 4

using the digital pen and thumbwheel

part 5

using the docking cable and desktop stand

part 6

connecting to a network

part 7

installing software and copying files

part 8

product support 16

0302

part 1 introduction to the

model 01

Welcome to the OQO model 01 ultra personal

computer (uPC). The model 01 is a complete,

full-featured computer. Docked at your desk it

is a normal PC. Undock it and have instant

access to all your applications and data,

wherever you go.

You can use the model 01 as a handheld

computer with its own thumb keyboard,

TrackStik®

, thumbwheel, and digital pen. You

can also use it as a desktop computer by

connecting it to an external monitor,

keyboard, and mouse. When in transit, simply

slip the model 01 into your pocket, briefcase,

or bag.

Because the model 01 uses the Microsoft®

Windows®XP operating system, you can use

it with all your favorite software applications

and seamlessly integrate with existing

networks via Ethernet, WiFi, or Bluetooth®.

This guide provides quick instructions for

setting up and learning to operate your

model 01. To locate more detailed

instructions, see “online documentation” on

page 18.

intro

0504

Your model 01 arrives with the battery

attached. The first time you use the model 01,

you must connect the power supply in order

to power the computer and charge the battery.

Connect the power supply to the model 01 as

shown at right, then plug it into an outlet.

The battery is charging whenever the

computer is connected to an outlet through

the power supply, regardless of whether the

computer is turned on or off. The battery fuel

gauge is located on the back of the battery.

While the model 01 is charging, the battery

fuel gauge lights flash in sequence.

When the battery is not charging, the battery

fuel gauge lights are unlit. To check the

battery power level, push the battery fuel

gauge button on the back of the battery.

part 2 powering up

During normal use, the fully-charged battery

can provide about three hours of operating

time. (For more information about maximizing

battery life, see

http://www.oqo.com/support/batterylife).

To turn on your model 01, press the power

button. The first time you do this, you must

set up Windows XP. See the Start Here guide

for Windows XP, included with your computer.

aPower supply

bBattery

cBattery fuel gauge button

dPower button

powering up

bef

0706

When using your model 01 as a standalone

handheld computer, you can use the thumb

keyboard and TrackStik for input.

Slide the screen upward to reveal the

keyboard. The mouse buttons are located on

the left edge of the keyboard. The keyboard is

designed to be operated with your thumbs.

Move the TrackStik with your thumb to control

the mouse pointer. Use the left mouse button

to left-click and the right mouse button to

right-click.

You can also connect an external keyboard and

mouse to the model 01 via a USB port,

Bluetooth, or the OQO docking cable. See

“using the docking cable and desktop stand”

on page 10.

Unlike on a regular keyboard, the shift

(SHIFT), function (FN), control (CTL), and alt

(ALT) keys are all sticky. Press once and the

LED next to it will flash, and the next key you

hit will be affected. Press it twice to lock it

and the LED will be on. All subsequent keys

will be affected until you hit it again to unlock

and the LEDturns off.

Here are a few examples of operations using

sticky keys:

• To activate caps lock, press the SHIFT key

twice.

• To deactivate caps lock, press the SHIFT

key a third time.

• To activate the Task Manager, press FN-

CTL-ALT-BSP.

• To switch to an external display, press FN-L.

• To turn WiFi on and off, press FN-”.

aLeft mouse button

bRight mouse button

cSticky keys

dENTER key

eTrackStik

fNumeric keypad

part 3 using the thumb

keyboard and

TrackStik

keyboard

0908

Use the digital pen like this:

•To select an object on the screen, touch it with

the tip of the pen.

• To drag an object, hold the pen over it and drag

across the screen. To drop the object, lift the

pen.

• To double-click an object, tap it twice.

• To right-click an object, select it and click the

button located on the digital pen.

Use the “Wacom Pen Settings” applet found in the

Control Panel to change this behavior and calibrate

the pen. It is important to calibrate your pen before

you start to use it. Use only light pressure with

the pen. The angle of the pen will affect its

behavior. More information on the pen can be

found at http:/www.oqo.com/support.

aThumbwheel

bDigital pen

cTap to select

dPen (right-click) button

eAudio in/out

part 4 using the digital pen

and thumbwheel

The thumbwheel can be used in multiple

modes. Use the OQO Settings applet found

in the Control Panel to change its behavior.

By default, the thumbwheel works like this:

•Click the thumbwheel once to display the

current mode, then click again to toggle

among the modes.

•Double-click the thumbwheel to toggle

between open applications or launch new

applications.

• In volume mode, rotate the wheel to the left

to decrease the volume and to the right to

increase it.

• In vertical scrolling mode, rotate the wheel

to the left to scroll up and to the right to

scroll down.

• In horizontal scrolling mode, rotate the

wheel to the left to scroll left and to the

right to scroll right.

Remove the digital pen by pulling it out of the

slot in the upper right corner of the OQO.

more inputs

1110

When using the model 01 as a desktop

computer, place it on the desktop stand to

hold it in a convenient, upright position.

The docking cable attaches to your model 01

as shown at right. When removing the docking

cable from the docking connector, keep the

cable straight, as twisting or angling it can

damage the connector. It includes multiple

ports that can be used simultaneously to

connect a variety of peripheral devices:

• Use the VGA port to connect to an external

monitor or projector. Resolutions up to

1280 x 1024 are supported. To change the

resolution of your external monitor or

projector, go to the “Display” applet in the

Control Panel and select the “Settings” tab.

The model 01 will remember the settings

and automatically adjust the screen

resolution when you dock and undock.

• Use the Ethernet port to connect to a Local

Area Network (LAN).

• Use the USB 1.1 port to connect to USB-

enabled devices, such as a keyboard or a

scanner. Use a USB hub to connect multiple

devices. A powered USB hub is recommended.

• Use the FireWire®(IEEE 1394) port to

connect to FireWire-enabled devices such as a

hard drive or camera.

• Use the audio out port to connect to

headphones or external speakers. An

additional audio out port is located on the

body of the computer.

• Use the DC power port to connect the power

supply to the cable. The power supply cannot

connect directly to the computer while the

docking cable is in use.

aFireWire port

bPower supply in

cUSB port

dAudio out

eEthernet port

fVGA out

part 5 using the docking

cable and desktop

stand

docking

1312

The model 01 provides several ways to

connect to a network:

• Use the integrated WiFi to connect to a

wireless network.

• Use the docking cable to attach an

Ethernet cable and connect to a Local Area

Network (LAN).

• Use the integrated Bluetooth and a

Bluetooth-enabled mobile phone to connect

to a wireless data network provider. (See

http://www.oqo.com/support/bluetooth for

more information).

• Use the USB port to attach a USB modem

and connect to a dial-up Internet Service

Provider (ISP).

part 6 connecting to a

network

For detailed information about configuring

network connections, see the Microsoft

Windows XP documentation.

aWiFi antenna

bBluetooth antenna

cDocking cable Ethernet port

dUSB port

eExternal WiFi antenna connector

(non-standard)

networking

1514

There are several ways to copy your existing

files from another computer to the model 01:

• Connect to a network and copy your files

over the network.

• Burn your files on a CD, then connect an

external USB 1.1 or FireWire DVD/CD

drive to the computer.

• Use a portable USB “key” or external

FireWire hard drive.

• Connect to another computer via FireWire.

We recommend using an external FireWire

hard drive to back up the files from your

model 01.

Your model 01 comes with Microsoft

Windows XP. There are several ways to

install your own software:

•Connect an external, USB 1.1 CD-ROM

drive to install the software from a

CD-ROM.

•Use a portable USB “key.”

• Connect to a secure network and run the

software installer from a network server.

aFireWire port

bUSB port

part 7 installing software

and copying files

installing

The OQO support site provides additional

information, including FAQs and articles, and

contact information for technical support.

Access the support site at

http://www.oqo.com/support/.

In the event that you need to contact OQO

technical support for help, be sure to have

your serial number and Microsoft Certificate

of Authenticity (COA) number ready. They are

located under the battery, on the underside of

the model 01. To remove the battery, push the

small latch next to the audio port and lift the

battery away from the computer.

aBattery release button

bMicrosoft Certificate of Authenticity (COA)

cSerial number

part 8 product support

This guide provides a brief overview of the

many features of the model 01. For more

comprehensive information, see the model 01

user's manual, available at

http://www.oqo.com/support/documentation.

Warranty information is available at

http://www.oqo.com/warranty.

The OQO return policy is available at

http://www.oqo.com/returns.

online documentation

18 19

T al device, pursuant to Part 15 of the FCC Rules. These

allation. This equipment generates, uses and

alled and used in accordance with the instructions, may cause harmful interference to radio

, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

(1) Reorient the receiving antenna

(2) Increase the separation between the equipment and receiver

(3) Move the computer away from the receiver

(4) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Declaration of Conformity

We, OQO, Inc. 583 Shotwell Street, San Francisco, California, USA, 415430 6200, declare under our sole responsibility that the product, OQO

model 01, complies with Part 15 of FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation.

Information regarding cable and type of ferrite to be used

(1) To prevent unwanted radio interference, the following type of cable may be used with the Ethernet jack:

Manufacturer: E-MU Systems, Part Number: 70EM886106000

(2) To prevent unwanted radio interference, the following type of ferrite may be used on the Audio cable or Headphone cable connected to the

OQO model 01:

Manufacturer: Steward, Part Number: 28A2026-0A2

(3) To prevent unwanted radio interference, the following type of IEEE-1394 cable may be used for the FireWire jack:

Manufacturer: Granite Digital, Part Number: 1660

Any modifications made to the UPC that are not authorized by OQO could void the user's right to operate the device.

Inhaltsverzeichnis

Andere OQO Desktop Handbücher

OQO

OQO E2 Leitfaden

Beliebte Desktop Handbücher anderer Marken

HP m9060n - Pavilion - Elite Technisches Datenblatt

Asus

Asus E210 Series Bedienungsanleitung

Dell

Dell Inspiron 600m Bedienungsanleitung

Dell

Dell Inspiron 3662 Bedienungsanleitung

TotalFlow

TotalFlow uFLO Bedienungsanleitung

HP Presario SV7000 - Desktop PC Bedienungsanleitung

HP ProDesk 400 G5 Handbuch

Logitech

Logitech MK320 Bedienungsanleitung

Dell

Dell XPS 730 H2C Bedienungsanleitung

Sony

Sony Vaio Series Bedienungsanleitung

Sony

Sony VGC-LT32E - Vaio All-in-one Desktop Computer Bedienungsanleitung

Alto

Alto MD 250 Bedienungsanleitung

Lenovo

Lenovo ThinkCentre Edge 72 Handbuch

Lenovo

Lenovo ThinkStation D20 Handbuch

Arbor Technology

Arbor Technology FPC-7800 Series Bedienungsanleitung

Sony

Sony VAIO VGX-TP1 Series Bedienungsanleitung

Asus

Asus Eee Box B204 Bedienungsanleitung

Dell

Dell Optiplex 9010 All In One Bedienungsanleitung