Oracle SPARC T7-2 Bedienungsanleitung

SPARC T7-2 Server Getting Started Guide

This guide describes how to install and power on Oracle's SPARC T7-2 server for the first time using the

preinstalled Oracle Solaris OS.

Before performing the procedures in this guide, review the following documents at the Oracle documentation web

site: http://www.oracle.com/goto/t7-2/docs.

■SPARC T7-2 Server Product Notes - For any late-breaking issues that impact installation requirements.

■SPARC T7-2 Server Installation Guide - For overview and more detailed installation information.

■SPARC T7-2 Server Safety and Compliance Manual - For safety and regulatory compliance information.

For additional safety information, refer to the Important Safety Information for Oracle's Sun Hardware Systems,

which is in the shipping kit.

Shipping Kit

1 Server 4 Antistatic wrist strap

2 Cable management assembly (CMA) 5 Printed documents

3 Rackmounting kit 6 AC power cords (quantity 2)

Install the Server

For quick installation and configuration, follow these steps. For more detailed information, refer to the

complete online product documentation set.

Caution - Do not apply power until instructed to do so. This server includes a service processor (SP) that

configures and boots the host server. To properly configure the host server and view SP messages, do not

apply AC power to the server until you make the SP and host networking connections, as described in this

guide.

1. Place the server in its intended location.

For rackmounting and CMA instructions, refer to the SPARC T7-2 Server Installation Guide.

2. Before installing the server into the rack, install any optional components you plan to use

with the server that were not factory installed.

For instructions on installing optional components, refer to the documentation for each component and to the

SPARC T7-2 Server Service Manual.

3. Connect a serial cable between the server's SER MGT port and a terminal device.

This connection provides the initial communication with the SP. Set up the server to communicate using

9600 baud, 8 bit, no parity, 1 stop bit. For DTE-to-DTE communication, use a RJ-45 cable that is set up for a

null modem configuration, in which the transmit and receive signals cross over.

4. (Optional) Connect an Ethernet cable between the server's NET MGT port and the network

to which future connections to the SP and host will be made.

Configure the server for the first time through the SER MGT port. After the initial configuration, you can set

up communication between the SP and host through this Ethernet interface.

5. Connect an Ethernet cable between one of the server's NET ports and the network to which

the server will communicate.

6. Connect the power cords to the power supplies and to separate power sources.

The server is equipped with two power supplies. Connect them to separate power sources (200 to 240 VAC)

to provide power redundancy. The server can operate with one power connection, but having only one power

source reduces the redundancy.

When the power cords are connected, the SP initializes and the power supply LEDs illuminate. After a

few minutes, the SP login prompt displays on the terminal device. At this time, the host is not initialized or

powered on.

Power On the Server

The following section describes how to power on the host after installing the server.

1. At the terminal device, log in to the SP as root with a password of changeme.

After a brief delay, the Oracle Integrated Lights Out Manager (Oracle ILOM) prompt (->) is displayed.

For optimal security, change the root password. For more information about administration tasks such as

changing passwords, adding accounts, and setting account privileges, refer to the SPARC T7 Series Servers

Administration Guide and the Oracle ILOM documentation at: http://www.oracle.com/goto/ilom/docs

By default, the SP is configured to use DHCP to obtain an IP address. If you plan to assign a static IP address

to the SP, refer to the SPARC T7-2 Server Installation Guide for instructions.

2. Power on the server and redirect the host output to display on the serial terminal device.

-> start /System

Are you sure you want to start /System (y/n)? y

-> start /HOST/console

Are you sure you want to start /HOST/console (y/n)? y

Serial console started.

. . .

Server initialization takes several minutes to complete.

To cancel the server initialization, press the #. (Hash+Dot) keys to return to the Oracle ILOM prompt. Then

type: stop /System

Note - To use an OS other than the preinstalled version, refer to the SPARC T7-2 Server Installation Guide.

3. (Optional) Execute other Oracle ILOM commands while the server initialization continues in

the background.

a. To display the Oracle ILOM prompt, press the #. (Hash+Dot) keys.

b. To see information about available Oracle ILOM commands, type: help

To see information about a specific command, type: help command-name

c. To return to displaying host output from the server initialization, type: start /HOST/console

4. When prompted, follow the onscreen instructions and type the configuration information for

your server.

If you are not sure how to respond, accept the default and make changes later when the Oracle Solaris OS is

running. After you confirm the configuration information, the server reboots and displays the Oracle Solaris

5. Log in to the server.

You now can enter Oracle Solaris OS commands at the prompt. For more details, refer to the Oracle Solaris

11 OS man pages and documentation at:

http://www.oracle.com/goto/solaris11/docs

6. Consider using Oracle virtualization and datacenter management software.

■Oracle VM Server for SPARC is a preinstalled system virtualization feature that provides a discrete

logical grouping with its own operating system, resources, and identity within a single computer system.

You can run a variety of applications in different logical domains and keep them independent for

performance and security purposes.

https://docs.oracle.com/en/virtualization/

■Oracle Enterprise Manager is a data center management tool that provides many features, including

a comprehensive configuration solution for software provisioning, hardware fault analysis, and

performance management.

http://docs.oracle.com/en/enterprise-manager/

Check for the Latest OS Updates, Patches, and Firmware

Some server features are enabled only when certain versions of patches or firmware are installed. Install the

latest available versions for the best performance, security, and stability.

1. Review the product notes for your server.

This document describes important product dependencies and late-breaking information.

See “Product Documentation Library” on page 6.

2. Download the latest available versions from My Oracle Support at:

https://support.oracle.com

Product Documentation Library

Documentation and resources for this product and related products are available at http://www.oracle.com/goto/

t7-2/docs.

Feedback

Provide feedback on this document at http://www.oracle.com/goto/docfeedback.

Documentation Accessibility

For information about Oracle's commitment to accessibility, visit the Oracle Accessibility Program web site at http:

//www.oracle.com/pls/topic/lookup?ctx=acc&id=docacc.

Access to Oracle Support

Oracle customers that have purchased support have access to electronic support through My Oracle Support. For

information, visit http://www.oracle.com/pls/topic/lookup?ctx=acc&id=info or visit http://www.oracle.

com/pls/topic/lookup?ctx=acc&id=trs if you are hearing impaired.

Part No: E54989-02

Mfg. No: 7095832

February 2016

Andere Handbücher für SPARC T7-2

Inhaltsverzeichnis

Andere Oracle Server Handbücher

Oracle

Oracle netra X5-2 Bedienungsanleitung

Oracle

Oracle Tekelec 1200 Bedienungsanleitung

Oracle

Oracle hospitality 9700 Bedienungsanleitung

Oracle

Oracle EXADATA X6-2 Bedienungsanleitung

Oracle

Oracle SNMA-2 Installations- und Betriebsanleitung

Oracle

Oracle SUN Fire X4640 Einrichtungshandbuch

Oracle

Oracle Sun Fire X4470M2 Service-Handbuch

Oracle

Oracle SPARC T7-1 Bedienungsanleitung

Oracle

Oracle Netra SPARC S7-2 Bedienungsanleitung

Oracle

Oracle Sun Fire X2270 M2 Bedienungsanleitung

Oracle

Oracle X9-2 Bedienungsanleitung

Oracle

Oracle JFNA4-7 Installations- und Betriebsanleitung

Oracle

Oracle X6 series Bedienungsanleitung

Oracle

Oracle X8-2L Bedienungsanleitung

Oracle

Oracle SPARC S7-2L Bedienungsanleitung

Oracle

Oracle netra X5-2 Bedienungsanleitung

Oracle

Oracle SPARC Enterprise M3000 Bedienungsanleitung

Oracle

Oracle Netra SPARC S7-2 Series Bedienungsanleitung

Oracle

Oracle StorageTek 8 Gb FC PCIe HBA Bedienungsanleitung

Oracle

Oracle SPARC Enterprise M3000 Bedienungsanleitung

Oracle

Oracle SPARC Enterprise M4000 Bedienungsanleitung

Oracle

Oracle X4-2B Bedienungsanleitung

Oracle

Oracle netra X5-2 Bedienungsanleitung

Oracle

Oracle SPARC T7-2 Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung