ORBOT SPRAYBORG Bedienungsanleitung
OPERATING MANUAL (ENG)
V052015
2
All Orbot equipment has been carefully tested and inspected at our USA factory. Orbot machines are
guaranteed for one year from the date of original purchase against defects or workmanship made during
manufacture. Within the guarantee period we undertake at our discretion, to repair or replace any part
found to be defective, free of charge to the purchaser with subject to the following conditions:
Claims made under the terms of the guarantee must be supported by the original invoice issued at the
time of sale along with the machine serial number.
For claims under this guarantee contact the supplier from whom you’ve purchased the product who will
arrange the appropriate action. Do not initially return the product as this could lead to transit damage.
Neither Orbot nor its distributors will be held responsible for any incidental or consequential loss.
This guarantee does not cover:
Periodic maintenance, repair, or replacement of parts due to normal wear and tear.
Damage caused by accident, misuse or neglect, re, or the tting of other than genuine Orbot parts.
Defects in other than genuine Orbot parts, repairs, modi cations or adjustments made by other than
a Orbot service engineer or authorized service dealer. Costs and risks of transport relating directly or
indirectly to the guarantee of this product. Consumable items such as brushes, drivers, velcro discs,
gliders, pads, and so forth. Orbot has a policy of continual product development and we reserve the right
to alter speci cations without prior notice.
WARRANTY
MACHINE DATA
Model:
Serial:
Date of Purchase:
Dealer:
Address:
Phone Number:
Sales Representative:
EC Declaration of Conformity
Machine Type: Floor Model: Orbot Sprayborg
This Machine is in conformity with the following EU directives:
- Machinery Directive: 2006/42/EC
- Electro Magnetic Compatibility Directive: 2004/108/EC
- In conformity with 2006/95/EC
Applied harmonized standards:
EN 60335-1, EN 60335-2-67
HOS GmbH
Hruby Orbital Systems
Kleiststraße 7
10787 Berlin
Date: 02/08/2010
Jeffrey Hruby CEO
3
Warranty
EC Declaration of Conformity
How to use this Manual
Safety
Technical Details
Operation
Unpacking and Initial Operations
Pre-Run Inspection
Power Cable Connection
Spray System Preparation
Spray Jets
Adjusting Height
Process of Cleaning
End of Application
Storage
Lifting and Carrying
Weight Kit Installation
Brush Installation
Attaching and Removing the Driver Plates
Accessories and Applications
Driver Plates
Standard Driver Plates
Carpet Pads
Melamine Pads
AkwaStrip Pads
StoneFlash Pads
Scrub Brush
Concrete Brush
Operation/Maintenance
Application on Different Floor Types
Cleaning the Machine
Changing the driver grip face
Parts Diagram and Parts List
Notes
2
4
5 - 7
8
9 - 16
17
18 - 38
39
9
10
11
12
13
14
15
16
TABLE OF CONTENTS
4
This manual contains the following sections:
•How to Use This Manual
•Safety
•Operations
•Maintenance
•Parts List
The HOW TO USE THIS MANUAL section will tell
you how to nd important information for ordering
correct repair parts.
Parts may be ordered from authorized dealers.
When placing an order for parts, the machine
model and machine serial number are important.
Refer to the MACHINE DATA box which is lled
out during the installation of your machine. The
MACHINE DATA box is located on the inside of the
front cover of this manual.
The model and serial number of your machine
is located on the left side of the handle, from the
operators perspective.
The SAFETY section contains important information
regarding hazardous or unsafe practices of the
machine. Levels of hazards are identied that could
result in product damage, personal injury, or severe
injury resulting in death.
The OPERATIONS section is to familiarize the
operator with the operation and function of the
machine.
The MAINTENANCE section contains preventive
maintenance to keep the machine and its
components in good working condition. They are
listed in this general order:
•Storage
•Maintenance
•Troubleshooting
The PARTS LIST section contains assembled parts
illustrations and corresponding parts list. The parts
lists include a number of columns of information:
•REF – column refers to the reference number on
the parts illustration.
•PART NO. – column lists the part number for the
part.
•PRV NO. – reference number.
•QTY – column lists the quantity of the part used in
that area of the machine.
•DESCRIPTION – column is a brief description of
the part.
•SERIAL NO. FROM – If this column has an (*) and
a Reference number, see the SERIAL NUMBERS
page in the back of your manual. If column has
two asterisk (**), call manufacturer for serial
number. The serial number indicates the rst
machine the part number is applicable to. The
main illustration shows the most current design of
the machine. When a boxed illustration is shown,
it displays the older design.
•NOTES – column for information not noted by the
other columns.
NOTE: If a service or option kit is installed on your
machine, be sure to keep the KIT INSTRUCTIONS
which came with the kit. It contains replacement
parts numbers needed for ordering future parts.
NOTE: The manual part number is located on the
lower left corner of the front cover.
HOW TO USE THIS MANUAL
5
IMPORTANT SAFETY INSTRUCTIONS
When using this machine, basic precaution must always be followed, including the following:
READ ALL INSTRUCTIONS BEFORE USING THIS MACHINE.
WARNING
To reduce the risk of re, electric shock, or injury:
•Use only indoors. Do not use outdoors or expose to rain.
•Use only as described in this manual. Use only manufacturers recommended components and
attachments.
•If the machine is not working properly, has been dropped, damaged, left outdoors, or dropped into
water, return it to an authorized service center.
•Do not operate the machine with any openings blocked. Keep openings free of debris that may reduce
airow.
•Machine can cause a re when operating near ammable vapors or materials. Do not operate this
machine near ammable uids, dust or vapors.
•This machine is suitable for commercial use such as: in hotels, schools, hospitals, factories, shops, and
ofces for more than normal housekeeping purposes.
•Maintenance and repairs must be done by qualied personnel.
•During operation, use caution around other persons, especially children.
•The machine shall only be operated by instructed and authorized persons.
•When leaving unattended, unplug the machine.
•Do not handle the plug or machine with wet hands.
•Do not unplug machine by pulling on cord. To unplug, grasp the plug and not the cord.
•Do not use with damaged cord or plug. Follow all instructions in this manual concerning grounding the
machine.
•Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp
edges or corners.
•Do not pull/run machine over cord. Keep cord away from heated surfaces.
•Connect to a properly grounded outlet. See Grounding Instructions.
•If the supply cord is damaged it must be replaced by an authorized service agent.
•Unplug before cleaning or servicing.
•Operational hazard may occur when running the machine over the supply cord.
•This appliance has been designed for use with pads specied by the manufacturer. The tting of other
pads may affect its safety.
•This machine is for dry use only and shall not be used or stored outdoors in wet conditions
•Moving Parts - To reduce the risk of injury, unplug before servicing.
READ AND SAVE THESE INSTRUCTIONS
SAFETY
6
The following symbols are used throughout this guide as indicated in their descriptions:
HAZARD INTENSITY LEVEL
There are three levels of hazard intensity identied by signal words -WARNING, CAUTION, and FOR
SAFETY. The level of hazard intensity is determined by the following denitions:
WARNING
WARNING - Hazards or unsafe practices CAN result in severe personal injury or death.
CAUTION
CAUTION - Hazards or unsafe practices which could result in minor personal injury or product or
property damage.
FOR SAFETY: To Identify actions which must be followed for safe operation of equipment.
Report machine damage or faulty operation immediately. Do not use the machine if it is not in proper
operating condition. The following is information that signals some potentially dangerous conditions to
the operator or the equipment. Read this information carefully. Know when these conditions can exist.
Locate all safety devices on the machine. Please take the necessary steps to train the machine operating
personnel.
FOR SAFETY:
DO NOT OPERATE MACHINE:
•Unless trained and authorized.
•Unless Operation Guide is read and understood.
•In ammable or explosive areas.
•In areas with possible falling objects.
WHEN SERVICING MACHINE:
Avoid moving parts. Do not wear loose clothing, jackets, shirts, or sleeves when working on the machine.
Use only manufacturer approved replacement parts.
SAFETY
7
SAFETY
GROUNDING INSTRUCTIONS 120V
THIS PRODUCT IS FOR COMMERCIAL USE ONLY
ELECTRICAL:
In the USA this machine operates on a 15 amp
nominal 120V, 60 hz, A.C. power circuit. The
amp, hertz, and voltage are listed on the data label
found on each machine. Using voltages above or
below those indicated on the data label will cause
serious damage to the motors.
GROUNDING INSTRUCTIONS:
This appliance must be grounded. If it should
malfunction or break down, grounding provides a
path of least resistance for electric current to reduce
the risk of electric shock. This appliance is equipped
with a cord that has an equipment-grounding
conductor and grounding plug. The plug must be
inserted into an appropriate outlet that is properly
installed and grounded in accordance with all local
codes and ordinances.
This appliance is for use on a nominal 120-volt
circuit, and has a grounded plug that looks like
the plug in “Fig. A”. A temporary adaptor that
looks like the adaptor in “Fig . C” may be used to
connect this plug to a 2-pole receptacle as shown
in “Fig. B”, if a properly grounded outlet is not
available. The temporary adaptor should be used
only until a properly grounded outlet (Fig. A) can
be installed by a quali ed electrician. The green
colored rigid ear, lug, or similar that extends from
the adaptor must be connected to a permanent
ground such as a properly grounded outlet box
cover. Whenever the adaptor is used, it must be
held in place by a metal screw.
WARNING
Improper connection of the equipment-grounding
conductor can result in electric shock. Check with a
quali ed electrician or service person if you are in
doubt as to whether the outlet is properly grounded.
Do not modify the plug provided with the appliance
- if it will not t the outlet, have a proper outlet
installed by a quali ed electrician.
SAFETY LABEL LOCATION
These drawings indicate the location of safety labels
on the Machine. If at any time the labels become
illegible, contact your authorized representative for
prompt replacement.
8
ITEM MEASURE
Motor 1HP, 100-240V/50-60Hz, 6 amps (50Hz)/11amp (60Hz)
RPM 1725 (60Hz)/1400 (50Hz)
Base Diameter 17“/43 cm
Orbital Diameter 3/8” (9.5 mm)
Weight 102 Lbs./46.7 kg
Height 48” (122 cm)
Length 29” (75 cm)
Wheels 10”/25 cm Diameter, resistant to chemicals
Decibel Rating 59 dB
TECHNICAL DETAILS
9
OPERATION
Unpacking and Initial Operations
Open the shipping box on both sides, remove the
packaging material and roll the machine out of the box.
Pre-Run Inspection
Before each use, inspect the accessory such as the pad
driver for cracks, tears, or excess wear. If the machine or
accessory is dropped, inspect for damage to install an
undamaged accessory.
Repair the damaged machine before the next application.
Tilt the head back and place the foot of the bumper on the
ground.
Choose a pad for the appropriate application. Center the
pad on the driver plate.
Position the handle in a lower position.and push slowly
forward until the machine base tilts towards the ground.
CAUTION
Make sure to put the wheels back on the ground in time to
avoid the base from falling on the ground. This might cause
damage!
Check to make sure the power switch is in the “off” position.
Power Cable / Quick Disconnect
Take provided power cable and connect to machine quick
disconnect located on machine. Push and twist to lock
cables together. You can now plug power cord into outlet.
WARNING
Spray System Preparation
Fill the bottle cartridge with recommended cleaning solution.
For priming the pump system for the rst system, move the
valve lever to the vertical position and depress spray switch
for 30 seconds. For standard priming, 10 seconds is usually
sufcient.
By adjusting the valve lever you can vary the spray
10
OPERATION
pressure. The further you move the lever counterclockwise
upwards, the higher the water pressure. A horizontal
position means maximum water output at maximum
pressure.
To turn the machine on, press the power button on the end
of the left handle.
Spray Jets
Adjust the spray jets on the machine base to the desired
position. For most oor cleaning applications adjust the
spray jets so that they spray about 6 inches (15 cm) in front
of the base.
Adjusting Height
Set the handle position to the desired height by pulling and
releasing the black knob with the left hand.
While holding the black knob out, raise or lower the handle
frame with your right hand.
To x the handle frame into place, release the black knob so
that it locks rmly into one of the holes provided.
Position “0” is off and position “I” is on.
CAUTION
Make sure a suitable pad or brush is mounted before
starting the machine. The immediate contact of the oor and
driver plate without a pad can lead to serious damage of
the oor and/or the machine.
Process of Cleaning
For effective oor cleaning, move the machine forward and
backwards. It is recommended to wet the oor as you move
the machine forward, releasing the solution button when
you move the machine backwards.
To increase the pressure and cleaning effect on certain oor
types like tile and grout, you can lift the machine frame up,
raising the wheels off the ground. When lifting the wheels
off the ground the full weight of the machine lies on the
machine base.
Inhaltsverzeichnis
Andere ORBOT Bodenreinigungsmaschine Handbücher
Beliebte Bodenreinigungsmaschine Handbücher anderer Marken
Nilfisk-Advance
Nilfisk-Advance Advance SC370 17B Bedienungsanleitung
Numatic
Numatic ET 4045 Bedienungsanleitung
HAWK ENTERPRISES
HAWK ENTERPRISES HP1513-180BRUTE Bedienungsanleitung
Mytee
Mytee 8070 Mytee-Lite Bedienungsanleitung
Kärcher
Kärcher B 140 R Bedienungsanleitung
Triple S
Triple S Ace 26T1 Bedienungsanleitung
