Oregon Scientific RRM313P Bedienungsanleitung

Radio-Controlled Projection Clock

with FM Radio

Model: RRM313P

Self-Setting Atomic Projection Clock

with FM Radio

Model: RRM313PA

USER MANUAL

CONTENTS

Introduction

...............................................................

Product Overview

.....................................................

Front Vie

..............................................................

Back View

..............................................................

LCD Display

...........................................................

Geting Started

...........................................................

Batteries

.................................................................

AC Ada

pter

.............................................................

pter .............................................................pter

Clock Reception

.......................................................

Turn the Radio Reception On / Off

.........................

Turn the Radio Reception On / Off ......................... Turn the Radio Reception On / Off

Clock / Calendar

.......................................................

Clock / Calendar .......................................................Clock / Calendar

Clock / Calendar Display

........................................

Set Clock / Calendar

.............................................

FM Radio

..................................................................

Operating the Radio

..............................................

Sleep

......................................................................

Backlight

...................................................................

Alarm

.........................................................................

Alarm Display and Sou

.......................................

Set the Alarm(S)

.....................................................

Activate / Deactivate the Alarm(S)

.........................

Snooze / Turning the Alarm OFF

...........................

Projection Unit

..........................................................

Reset The Clock

.......................................................

Warnings

...................................................................

Troubleshooting

.......................................................

Technical Speciﬁ cations

.........................................

Notices

.......................................................................

Statement of Responsibility

....................................

About Oregon Scientiﬁ c

..........................................

EU-Declaration of Conformity

.................................

FCC Statement

........................................................

Declaration of Conformity

.....................................

RRM313P_M_EN_op.indd 1 2006.4.6 3:19:31 PM

INTRODUCTION

Thank you for selecting the Oregon Scientific™

projection clock with FM

radio.

Keep this manual handy as you use your new product.

It contains practical step-by-step instructions, as well

as technical specifications and warnings you should

know.

PRODUCT OVERVIEW

FRONT VIEW

Activate 8-minute snooze function,

or backlight and projector

Switch radio on or off

Activate sleep function

Projector:

Projects time and alarm status

Station/Tuning

:Toggle up or down through

radio frequencies / memorized station

Increase or decrease volume

Toggle between alarm and calendar display

Toggle between setting modes /

confirm

settings

Switch alarm on or off

BACK VIEW

RRM313P_M_EN_op.indd 2 2006.4.6 3:19:39 PM

4.5V AC / DC

Adapter Socket

Battery

Compartment (cover on)

: 2 x UM-3 / AA

1.5V batteries

RESET:

Press to return all values to the default

settings

PROJECTION ON / OFF

: Slide to ON for continuous

image projection when the AC power is connected

Radio Antenna

EU / UK

(RRM313P only) Select nearest radio signal

base i.e. England or Germany

LCD DISPLAY

1. Time

2. Alarm on / off

3. Radio alarm on / off

Alarm time / Calendar

5. Offset time zone

6. Radio-controlled clock reception

7. Battery status

8. AC adapter is disconnected

9. FM radio display / sleep / volume level

GETING STARTED

BATTERIES

Batteries are supplied with this product:

• 2 x UM-3 / AA 1.5V batteries

NOTE

The batteries are for back-up use only. Please

use the adapter for continuous use.

NOTE

It is recommended that you use alkaline batteries

with this product for longer performance.

Insert batteries before first use, matching the polarity

(+ and -) as shown below. Press

RESET

after each

battery change.

NOTE

Do not use rechargeable batteries with this

product.

RRM313P_M_EN_op.indd 3 2006.4.6 3:19:43 PM

BATTERY ICON MEANING

Batteries are low, or there are no

batteries installed and only the

adapter

is connected

adapter is connectedadapter

AC ADAPTER

The batteries serve as a back-up power supply. For

continuous use of the projector, install the AC

adapter

at the base of the unit as shown below.

NOTE

To help conserve energy, turn the

switch to OFF when you do not

wish to use it.

CLOCK RECEPTION

This product is designed to synchronize its calendar

clock automatically once it is brought within range of

a radio signal:

RRM313P:

• DCF-77 generated from Frankfurt, Germany for

Central Europe

• MSF-60 generated from Rugby, England

The radio signal range is 1500km (932 mil

es).

RRM313PA:

• WWVB-60 generated from the atomic clock in Fort

Collins,

Colorado

The radio signal range is 3219km (2000

miles).

RRM313 only - slide the

EU / UK

switch to the appropriate

EU / UK switch to the appropriate EU / UK

setting based on your location. Press

RESET

whenever

you change the selected setting.

NOTE

For best results, place the clock away from metal or

electrical objects, and near a window with a clear view to the sky.

TURN THE RADIO RECEPTION ON / OFF

To turn the radio reception ON:

• Press

and hold for 2 seconds.

• The reception icon will appear and flash on the

display to indicate it is searching for the signal.

Once batteries have been installed in the clock, the reception

icon will flash to indicate it is searching for a signal.

When the reception signal has been received the

reception icon will show the signal strength by displaying

between 0 and 3 waves:

STRONG SIGNAL WEA

K SIGNAL NO SIGNAL

STRONG SIGNAL WEA

K SIGNAL NO SIGNAL

BATTERY ICON MEANING

Batteries are low, or there are no

RRM313P_M_EN_op.indd 4 2006.4.6 3:19:46 PM

To turn the radio reception OFF:

• Press and hold

for 2 seconds.

•

The reception

icon will disappear from the display.

CLOCK / CALENDAR

CLOCK / CALENDAR DISPLAY

Press

MODE

to toggle between 3 types of display

(Clock with seconds, Clock with day, Clock with time

zone offset).

SET CLOCK / CALENDAR

1. Press and hold

MODE

for 2 seconds. The time zone

offset hour digits will flash. When an offset hour has

been set (e.g. +1), the time displayed will be the

radio-controlled clock time plus 1 hour.

2. Press

to change the setting.

3. Press

MODE

to confirm the setting and move onto

the next one.

4. The settings appear in the following order: Time

zone hour offset, 12 / 24 hour format, hour, minute,

year, MM / DD or DD / MM format, month, day and

language for day of the week.

5. Press

ation

Tuni

to exit the

Clock Setting Mode.

FM RADIO

This product has a built-in FM radio that can store up to

8 stations. In order to conserve power, the FM radio only

works when the AC adapter is plugged in.

OPERATING THE RADIO

1. Press

to switch the radio on.

2. Press

to change the radio volume.

3. Press

ation

Tuni

straight

in to scroll through

the 8 preset channels.

4. Roll

ation

Tuni

towards the up or down arrow

to change the selected channel’s radio frequency.

Roll and hold

ation

Tuni

to enable auto-search

for an available frequency. Press

ation

Tuni

straight in to store the radio station.

RRM313P_M_EN_op.indd 5 2006.4.6 3:19:50 PM

SLEEP

The radio is equipped with a countdown sleep timer

that can be set to switch the radio off after up to 120

minutes.

1. Press

to enter sleep mode.

2. Use the

button to change the sleep time setting

(120, 90, 60, 45, 30, 15, 0).

3. Press any key to exit sleep mode – the sleep timer

will be automatically activated.

BACKLIGHT

Press

activate the backlight for 5

seconds.

ALARM

ALARM DISPLAY AND SOUND

This product has two types of daily alarm that can be set

to go off at the same time every day. You can choose to

be woken up by the radio or by a buzzer alarm. Press

at any time to toggle between the calendar and the

alarm display.

NOTE

f the radio alarm time is reached when the AC

adapter

is not connected the unit will default to

buzzer

alarm.

buzzer alarm.buzzer

SET THE ALARM(S)

1. Press and hold

for 2 seconds.

2. Use

to change the flashing setting.

3. Press

to confirm the setting and move onto the

next one.

4. The settings appear in the following order: Hour,

minute, alarm type (i.e. radio alarm or buzzer

alarm).

5. If radio alarm is selected, preset station and preset

volume can also be altered.

6. Press

to exit alarm setting mode.

7. The daily alarm will be on automatically after

setting.

ACTIVATE / DEACTIVATE THE ALARM(S)

•

Press to

enable or disable the daily alarm.

• When the buzzer alarm / radio alarm icon appears

on the display the alarm is activated. When the

icons do not appear the buzzer alarm / radio alarm

is deactivated.

SNOOZE / TURNING THE ALARM OFF

When activated, the alarm icon flashes, the backlight

and projector turn on for 8 seconds. The buzzer alarm

sounds for 2 minutes if no key is pressed. The radio will

remain on for 120 minutes if no key is pressed.

To silence the alarm:

• Press to silence the buzzer alarm

for 8 minutes. The buzzer alarm icon will flash to show

snooze is enabled. (Please note that you cannot use

the snooze function on the radio alarm.)

RRM313P_M_EN_op.indd 6 2006.4.6 3:19:51 PM

• Never immerse the product in water. This can cause

electrical shock and damage the product.

• Do not subject the product to extreme force, shock,

or fluctuations in temperature or humidity.

• Do not tamper with the internal components.

• Do not mix new and old batteries or batteries of

different types.

• Do not use rechargeable batteries with this

product.

• Remove the batteries if storing this product for a long

period of time.

• Do not scratch the LCD display.

• Placement of this product on wood surfaces with

certain types of finishes, such as clear varnish, may

result in damage to the

finish. Cons

ult the furniture

manufacturer’s care instructions for direction as to

the types of objects that may safely be placed on

the wood surface. Oregon Scientific shall not be

responsible for any damage to wood surfaces from

contact with this product.

• Do not dispose this product as unsorted municipal

waste. Collection of such waste separately for

special treatment is necessary.

NOTE

The technical specification of this product and

contents of this user manual are subject to change

without notice. Images not drawn to scale.

• Press any key except to mute any

alarm and activate it again in 24 hours.

PROJECTION UNIT

The projection unit can display both time and alarm

status. To use this feature:

• Slide the

switch

to activate

continuous projection. However, this function will

not work unless the AC / DC

adapter

is used.

adapter is used.adapter

NOTE

You can also press the

button

to project the time and alarm status for 5 seconds.

RESET THE CLOCK

To reset the unit, insert a thin blunt instrument into the

reset hole.

WARNINGS

This product is designed to give you years of service

if handled properly. Oregon Scientific will not be

responsible for any deviations in the usage of the

device from those specified in the user instructions or

any unapproved alterations or repairs of the product.

Observe the following guidelines:

• Do not clean any part of the product with benzene,

thinner or other solvent chemicals – this may cause

permanent damage that is not covered by the

guarantee. When necessary, clean it with a damp

cloth.

RRM313P_M_EN_op.indd 7 2006.4.6 3:19:52 PM

TROUBLESHOOTING

PROBLEM SYMPTOM

REMEDY

Clock time is No radio signal

Place the clo

ck far

not correctly set

reception

not correctly set

reception

not correctly set

away from PCs,

phones, and other

electronic equipment

and near a windowsill.

Wait for at least 24

hours

No alarm Alarm does not

Turn on the sett

ing

sound

Operation

Certain funct

ions

Reset the clock

not normal do not perform

Calendar Strange day

Check it is set to

your

own language

Clock Cannot change

Disable the radio

clock signal and set

manually

Clock / Calendar

Cannot auto- 1. Ad

Clock / Calendar

Cannot auto- 1. Ad

Clock / Calendar

just batteries

synchronize 2. Press

RESET

the clock

TECHNICAL SPECIFICATIONS

TYPE DESCRIPTION

Main Unit Dimensions

L x W x H 110 x 57 x 100 mm

(4.33 x 2.24 x 4.05 inches)

Weight (without battery) 201 g (0.44 lbs)

Main Unit RF

RF Clock Frequency

DCF-77 (EU), MSF60 (UK)

System

and WWVB-60 (US)

Synchronization Auto or disabled

FM Band Range 87.5-108.0 MHz

Main Unit Display

Clock HH:MM:SS

HH:MM: Day of week

HH:MM: Time zone hour offset

Hour Format

12hr AM / PM (MSF Format)

24hr (DCF Format)

Calendar

DD / MM or MM / DD, user

selectable. Weekday language:

E, D, F, I, S.

Alarm • 2-minute alarm

• 8-minute snooze

Power

Main Unit 2 x UM-3 / AA 1.5V batteries

4.5V

AC / DC

adapter

TYPE DESCRIPTION

Synchronization Auto or disabled

FM Band Range 87.5-108.0 MHz

L x W x H 110 x 57 x 100 mm

(4.33 x 2.24 x 4.05 inches)

Weight (without battery) 201 g (0.44 lbs)

Clock HH:MM:SS

HH:MM: Day of week

24hr (DCF Format)

E, D, F, I, S.

Alarm • 2-minute alarm

• 8-minute snooze

Main Unit 2 x UM-3 / AA 1.5V batteries

PROBLEM SYMPTOM

Clock time is No radio signal

reception

hours

No alarm Alarm does not

sound

not normal do not perform

Calendar Strange day

Clock Cannot change

clock signal and set

manually

Cannot auto- 1. Ad

synchronize 2. Press

the clock

hours

sound

Reset the clock

clock signal and set

manually

Cannot auto- 1. Ad

synchronize 2. Press

RRM313P_M_EN_op.indd 8 2006.4.6 3:19:52 PM

NOTE

It is recommended that you use alkaline batteries

with this product for longer performance.

NOTE

Design and specifications are subject to change

without notice.

NOTICES

STATEMENT OF RESPONSIBILITY

Oregon Scientific will not be held liable for any bodily

injury, death, property damages, or any other claims of

whatever nature resulting from the misuse or negligence

of the product, whether intentional or unintentional.

Oregon Scientific will not be responsible for any

deviations in the usage of the device from those specified

in the user instructions or any unapproved alternations

or repairs of the product.

ABOUT OREGON SCIENTIFIC

Visit our website (

www.oregonscientific.com

) to learn

more about Oregon Scientific products such as digital

cameras; MP3 players; children’s electronic learning

products and games; projection clocks; health and

fitness gear; weather stations; and digital and conference

phones. The website also includes contact information

for our Customer Care department in case you need

to reach us, as well as frequently asked questions and

customer downloads.

We hope you will find all the information you need on our

website, however if you’re in the US and would like to

contact the Oregon Scientific Customer Care department

directly, please visit:

www2.oregonscientific.com/service/default.asp

Call 1-800-853-8883.

For international inquiries, please visit:

www2.oregonscientific.com/about/international.asp

EU-DECLARATION OF CONFORMITY

Hereby, Oregon Scientific, declares that this Radio-

Controlled Projection Clock with FM Radio (RRM313P)

is in compliance with the essential requirements and

other relevant provisions of Directive 1999/5/EC.

A copy of the signed and dated Declaration of Conformity

is available on request via our Oregon Scientific

Customer Service.

COUNTRIES RTTE APPROVAL COMPLIED

ALL EU countries, Switzerland

and Norway

RRM313P_M_EN_op.indd 9 2006.4.6 3:19:53 PM

•

Connect the equipment into an outlet on a circuit

different from that to which the receiver is connected.

•

Consult the dealer or an experienced radio / TV

technician for help.

DECLARATION OF CONFORMITY

The following information is not to be used as contact

for support or sales. Please call our customer service

number (listed on our website at

www.oregonscientific.com

or on the warranty card for this product) for all inquiries

instead.

Name: Oregon Scientific, Inc.

Address: 19861 SW 95

Ave.,Tualatin,

Oregon 97062 USA

Telephone No.: 1-800-853-8883

declare that the product

Product No.:

RRM313P / RRM313PA

Product Name: Self-Setting Atomic Projection

Clock with FM Radio

Manufacturer: IDT Technology Limited

Address: Block C, 9/F, Kaiser Estate,

Phase 1,41 Man Yue St.,

Hung Hom, Kowloon, H

ong Kong

is in conformity with Part 15 of the FCC Rules. Operation

is subject to the following two conditions: 1) This device

may not cause harmful interference. 2) This device must

accept any interference received, including interference

that may cause undesired operation.

FCC STATEMENT

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions: (1)

This device may not cause harmful interference, and

(2) This device must accept any interference received,

including interference that may cause undesired

operation.

WARNING

Changes or modifications not expressly

approved by the party responsible for compliance could

void the user’s authority to operate the equipment.

NOTE

This equipment has been tested and found

to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against

harmful interference in a residential installation.

This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications. However, there

is no guarantee that interference will not occur in a

particular installation. If this equipment does cause

harmful interference to radio or television reception,

which can be determined by turning the equipment

off and on, the user is encouraged to try to correct

the interference by one or more of the following

measures:

•

Reorient or relocate the receiving antenna.

•

Increase the separation between the equipment and

receiver.

RRM313P_M_EN_op.indd 10 2006.4.6 3:19:54 PM

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Oregon Scientific Radiowecker Handbücher

Oregon Scientific

Oregon Scientific RM913TCN Bedienungsanleitung

Oregon Scientific

Oregon Scientific EasyPlus EC101 Bedienungsanleitung

Oregon Scientific

Oregon Scientific BARM123A Bedienungsanleitung

Oregon Scientific

Oregon Scientific RM313PU Bedienungsanleitung

Oregon Scientific

Oregon Scientific RRM902 Bedienungsanleitung

Oregon Scientific

Oregon Scientific EW96 Bedienungsanleitung

Oregon Scientific

Oregon Scientific RRA320P - MANUAL 2 Bedienungsanleitung

Oregon Scientific

Oregon Scientific TW223 Bedienungsanleitung

Oregon Scientific

Oregon Scientific RRM902A Bedienungsanleitung

Oregon Scientific

Oregon Scientific RRA200 Bedienungsanleitung

Oregon Scientific

Oregon Scientific BARM123A Bedienungsanleitung

Oregon Scientific

Oregon Scientific WS683 Bedienungsanleitung

Oregon Scientific

Oregon Scientific EasyPlus EC101 Bedienungsanleitung

Oregon Scientific

Oregon Scientific RRA320P Bedienungsanleitung

Oregon Scientific

Oregon Scientific RRA320PN Bedienungsanleitung

Oregon Scientific

Oregon Scientific RM510 Bedienungsanleitung

Oregon Scientific

Oregon Scientific RM826 Bedienungsanleitung

Oregon Scientific

Oregon Scientific RC05 RCC Bedienungsanleitung

Oregon Scientific

Oregon Scientific Starck PSS03A Bedienungsanleitung

Oregon Scientific

Oregon Scientific RM822 Bedienungsanleitung

Oregon Scientific

Oregon Scientific RM303P Bedienungsanleitung

Oregon Scientific

Oregon Scientific RRM-112 Bedienungsanleitung

Oregon Scientific

Oregon Scientific RRM968P Bedienungsanleitung

Oregon Scientific

Oregon Scientific BARM969P Bedienungsanleitung

Beliebte Radiowecker Handbücher anderer Marken

Denver

Denver CRQ-105 Bedienungsanleitung

Audiovox

Audiovox CE90 Bedienungsanleitung

Sony

Sony Dream Machine ICF-C763L Bedienungsanleitung

Sanyo

Sanyo DMP-P6 Bedienungsanleitung

Yamaha

Yamaha ISX-80 Bedienungsanleitung

Pyle

Pyle PLMR20W Bedienungsanleitung

Blaupunkt

Blaupunkt CR7BK Bedienungsanleitung

Philips

Philips AJ3180 Bedienungsanleitung

HoMedics

HoMedics SS-5500-2EU Bedienungsanleitung

RCA

RCA RC66i Bedienungsanleitung

Versaudio

Versaudio Vers Bedienungsanleitung

SOUNDMASTER

SOUNDMASTER UR8100 Bedienungsanleitung

Audiovox

Audiovox CE90 Bedienungsanleitung

Jensen Audio

Jensen Audio JCR-222 - AM/FM Projection Alarm Clock Radio Bedienungsanleitung

Roberts

Roberts ChronoDAB Bedienungsanleitung

AEG

AEG MRC 4132 BT Bedienungsanleitung

Tokai

Tokai TC-155 Bedienungsanleitung

Timex

Timex T300 Bedienungsanleitung