Oregon Scientific GP123 Bedienungsanleitung

GPS Scout

Backtrack Altimeter

Model: GP123

USER MANUAL

INDEX

Introduction ...................................................................2

Overview ........................................................................2

Front view ................................................................2

LCD screen ..............................................................3

Battery replacement ......................................................3

Displays .........................................................................4

Operation modes .....................................................4

Time / date / alarm ...................................................4

To set clock and alarm ..................................................5

Altimeter and barometer modes ..................................5

About the altimeter - barometer ...............................5

To set and reset altimeter .........................................5

To set sea level pressure .........................................6

Compass mode .............................................................6

About the compass ..................................................6

Compass sensor calibration .....................................7

Declination angle .....................................................7

True North calibration ...............................................8

GPS mode ......................................................................8

LED light .....................................................................10

Backlight / keypad lock ..............................................10

Water resistance ..........................................................10

Speciﬁcations ..............................................................10

Precautions ..................................................................10

About Oregon Scientiﬁc .............................................11

EU declaration of conformity .....................................11

INTRODUCTION

Thank you for selecting the Oregon ScientiﬁcTM GPS Scout

Backtrack Altimeter (GP123). Useful for any outdoor activity,

the GP123 comes equipped with GPS, altimeter, barometer,

compass and alarm.

With easy-to-view display and sturdy yet comfortable palm-

grip design, the GP123 is useful when venturing outdoors.

View at a glance temperature, time and weather forecast

information as well as data relating to altitude, barometer,

compass and GPS depending on your selection.

Store up to 3 locations and use the backtrack function to

easily navigate your way back.

IMPORTANT

• The measurement functions built into the GP123 are

not meant to substitute professional measurement

or industrial precision devices. Values produced

by this device should be considered as reasonable

representations only.

• Oregon ScientiﬁcTM assumes no responsibility for any

loss, or any claims by third parties that may arise

through the use of this device.

OVERVIEW

FRONT VIEW

1. LED light

2. : select location ( / / ); store location

into memory; increase value of the setting; toggle

setting options

3. DISP/-: toggle between modes; enter time setting mode;

decrease value of the setting; toggle setting options

4. SET: conﬁrm setting; toggle bottom line display (time

/ date / alarm); enter settings for altitude/ barometer /

compass

5. : turn on LED light

6. : turn on backlight; lock / unlock keypad

LCD SCREEN

1. Indicates which mode (ALTI / BARO / COMPASS / GPS)

is displayed: altitude / barometer / compass / GPS

2. Temperature

3. Weather forecast

4. Key press prompt: - press SET; - press and

hold SET

5. : keypad is locked

6. : sea level is displayed

7. : altitude memory is being deleted

8. AM/PM: 12 hour format

9. : alarm time is displayed

10. : daily alarm is on

11. : GPS signal quality indicator

12. / / : stored location (parking space / home /

favourite spot)

13. : maximum altitude reached / exceeded

14. Measurement units (hPa, m, km / ft, inHg, mi)

15. : low battery indicator

16. : direction indicator

BATTERY REPLACEMENT

The GP123 uses 2 x AAA batteries which have already been

installed.

If the battery power of the unit is low, and ‘need new

batt’ are displayed. Promptly replace the battery to ensure

continuous operation of GPS and other functions.

To replace battery:

1. Lift up the ring lever part of the screw and rotate counter

clockwise to open battery compartment.

2. Remove battery compartment cover.

3. Insert the batteries, matching the polarities.

4. Close the battery compartment and rotate screw

clockwise to secure.

DISPLAYS

OPERATION MODES

Press DISP/- to toggle between modes:

MAX

SEA

DISP/-

DISP/- DISP/-

DISP/-

TIME / DATE / ALARM

Press SET to toggle between time / date / alarm in any

mode.

TO SET CLOCK AND ALARM

1. Press and hold DISP/- to enter time setting mode.

2. Set clock and alarm by pressing the following buttons:

• to increase value or toggle options

• DISP/- to decrease value or toggle options

• SET to conﬁrm

The setting options are: hour format, hour, minute, year,

calendar format, month, date, alarm time (hour / minute),

alarm on/off, measurement unit.

NOTE For your convenience, measurement units have

been programmed to automatically follow the same format

(imperial / metric).

will appear when alarm has been enabled.

To disable alarm:

Press any key.

ALTIMETER AND BAROMETER MODES

ABOUT THE ALTIMETER - BAROMETER

The altimeter measures altitude in either meters or feet.

The device is equipped with an intelligent barometer that

determines altitude by the built-in sensor and advanced

Baro-compensation technology. It also distinguishes the

differences between pressure caused by the changes

in physical altitudes and pressure caused by weather

conditions. This eliminates discrepancies and makes the

altimeter more accurate than most of the average devices

available on the market. Maximum altitude and instant sea

level pressure readings are also provided.

TO SET AND RESET ALTIMETER

The altitude is automatically measured from the moment you

switch on the device. It will provide both barometer readings

and maximum sea level pressure readings.

To set and reset altimeter:

1. Press DISP/- repeatedly to navigate to altimeter mode.

2. Press and hold SET to enter settings.

3. Press or DISP/- to change current altitude, then

SET to conﬁrm.

4. Press or DISP/- to select whether to clear

maximum altitude record (yes / no), then SET to

conﬁrm.

TO SET SEA LEVEL PRESSURE

1. Press DISP/- repeatedly to navigate to barometer

mode.

2. Press and hold SET to enter settings.

3. Set the following options (sea level pressure, weather

forecast icons) by pressing the following buttons:

• to increase value or toggle options

• DISP/- to decrease value or toggle options

• SET to conﬁrm

TIP To help device quickly detect weather conditions after

its turned on for the ﬁrst time or after battery reset, you are

recommended to manually set the weather icon. If weather

icon has not been set, the unit will simply take longer to

detect current weather conditions.

This device forecasts the next 12 to 24 hours of weather.

Sunny Partially

cloudy Cloudy Rainy

COMPASS MODE

IMPORTANT Although the compass has been calibrated

during the manufacturing process, it is highly recommended

to calibrate the compass before ﬁrst use to take into account

location factors which may affect the compass.

For more accurate readings, it is strongly recommended to

calibrate the compass whenever outdoors.

The compass should be calibrated:

• Before ﬁrst use.

• After the battery has been replaced.

• Before you leave for an extended outdoor activity.

• Whenever it is exposed to strong magnetic sources,

extreme cold, or you suspect that other environmental

conditions have affected the compass readings.

• If you notice that the compass is not showing the

direction correctly.

ABOUT THE COMPASS

The compass shows the bearing in degrees due North

together with 16 cardinal / ordinal points. The outer

circumference of the display consists of 16 segments that

graphically show the bearing. The last lit segment indicates

North as shown below.

NOTE If no key has been pressed in any 5 minute period,

the compass will time out and return to Altimeter mode

(default display).

COMPASS SENSOR CALIBRATION

NOTE

• Always take bearings in the open air, not inside

buildings, tents, caves, or other shelters.

• Compass readings should be performed away from

magnetic materials. Avoid large magnetic objects,

power lines, loudspeakers, electric motors etc.

IMPORTANT Compass calibration should be done on a ﬂat

horizontal surface. If there is no ﬂat stable surface available,

place it on the palm of your hand so that it is perpendicular to

your body. Using the other hand, turn the unit to calibrate.

To calibrate the compass sensor:

1. Press DISP/- repeatedly to navigate to compass mode.

2. Press and hold SET. Display will show CALI and smart

prompt .

3. Press SET to start calibration.

4. Rotate the unit clockwise at a constant speed. The

moving segments around the circumference of the

display act as a guide. The rotation will be ﬁnished once

you have performed 2 turns.

NOTE OK indicates calibration has been successfully

completed. Repeat steps 2-4 if FAIL is displayed.

DECLINATION ANGLE

Declination is the angle between where a compass needle

points (magnetic North Pole) and the true North Pole. The

declination angle can vary from 0-30 degrees East (E)

or West (W) and can be found on most maps or on the

Internet.

For declinations in the United States:

http://www.ngdc.noaa.gov/geomagmodels/Declination.jsp

1. Enter your zip code in the text box.

2. Click “Get Location”.

3. Scroll down and click “Compute”.

For declinations in Canada:

http://geomag.nrcan.gc.ca/apps/mdcal-eng.php

For places elsewhere in the world, visit the website:

http://www.magnetic-declination.com

When you set the declination angle on the compass you

compensate for the difference between true and magnetic

north. This makes the compass reading more accurate.

To set the declination angle:

1. Press DISP/- repeatedly to navigate to compass mode.

2. Press and hold SET. Display will show CALI.

3. Press DISP/- to toggle to declination option. Display will

show DECLI.

4. Press SET to conﬁrm.

5. Set the following options: on / off; West / East (only if

ON is selected); degree of declination angle by pressing

the following buttons:

• to increase value or toggle options

• DISP/- to decrease value or toggle options

• SET to conﬁrm

TRUE NORTH CALIBRATION

When you do not know the declination angle, the true north

calibration function can be used to compensate for the

difference between magnetic and true north. All you need

to know is the direction of true north (this can be found from

landmarks in your immediate vicinity). Setting the true north

calibration makes the compass reading more accurate.

To set True North calibration:

1. Press DISP/- repeatedly to navigate to compass mode.

2. Press and hold SET. Display will show CALI.

3. Press DISP/- to toggle to True North option. Display will

show NORTH.

4. Press SET to enter settings.

5. Press to select on / off, then press SET to

conﬁrm.

If ‘ON’ has been selected, rotate the unit to align direction

indicator to true north when prompted, then press SET to

conﬁrm.

NOTE If the declination angle is turned ON, the True north

function will automatically turn itself OFF and vice-versa.

GPS MODE

TIP Go outdoors and move to an open area for best GPS

signal quality. Stand still when device searches for GPS

signal.

Press DISP/- repeatedly to navigate to GPS mode.

When in GPS mode, the device automatically searches for

GPS.

NOTE Upon exiting GPS mode, GPS signal will remain

locked for 60 seconds to allow navigating to other modes.

will ﬂash during search.

The signal quality is as follows:

Excellent

Good

Poor

“No icon” No signal

For GPS function to operate, signal quality needs to be good

or excellent.

Once GPS signal has been found, the device can store up

to 3 locations at any one time. For your convenience, each

location is represented by an icon:

Icon Suggested use

Parking space

Home

Favourite spot

To mark location:

1. Press repeatedly to select desired icon.

2. Press and hold to save location into memory.

To search for stored location (backtrack function):

1. Press DISP/- repeatedly to navigate to GPS mode.

2. Once GPS signal has been successfully found, press

repeatedly to select the symbol which represents

the location you wish to return to.

3. Walk according to the arrow direction as shown on the

LCD display.

The display will also show the remaining distance. When

REACH appears, you have arrived at the desired location.

NOTE REACH will appear when you are close to the saved

location.

NOTE If no key has been pressed in any 15 minute period,

SLEEP will appear on the display indicating GPS has timed

out. Press any key to return to GPS mode.

NOTE Prolonged usage of backtrack function will shorten

battery life.

LED LIGHT

To turn on LED light:

• Press and hold .

(light will remain on for the duration it is pressed)

BACKLIGHT / KEYPAD LOCK

To activate backlight:

• Press to turn on backlight for 3 seconds.

NOTE The backlight function will not operate if is

displayed.

To toggle keypad lock On or Off:

• Press and hold .

indicates keypad is locked.

WATER RESISTANCE

The GP123 is splash proof only.

SPECIFICATIONS

Real time clock 12/24 hour with hour, minute

Temperature

range

-5°C to 50°C

(28°F to 116°F)

Altitude range -400 to 9,000 m

(-1312 to 29,520 ft)

Barometric

pressure range

300 to 1,100 hPa

(8.86 to 32.48 inHg)

Sea level pressure

range

900 to 1,100 hPa

(26.58 to 32.48 inHg)

Weather forecast Sunny, partially sunny, cloudy, rainy

Digital compass 16 cardinal / ordinal points

Power 2 x UM-4 (AAA) 1.5V batteries

Operating

temperature

-5°C to 50°C

(28°F to 116°F)

Storage

temperature

-10°C to 70°C

(1°F to 135°F)

PRECAUTIONS

To ensure you use your product correctly and safely, read

these warnings and the entire user manual before using the

product:

• Use a soft, slightly moistened cloth. Do not use abrasive

or corrosive cleaning agents, as these may cause

damage. Use luke warm water and mild soap to clean

the unit thoroughly after each training session. Never

use the products in hot water or store them when wet.

• Do not subject the product to excessive force, shock,

dust, temperature changes, or humidity. Never expose

the product to direct sunlight for extended periods. Such

treatment may result in malfunction.

• Do not tamper with the internal components. Doing

so will terminate the product warranty and may cause

damage. The main unit contains no user-serviceable

parts.

Andere Handbücher für GP123

Inhaltsverzeichnis

Andere Oregon Scientific GPS Handbücher

Oregon Scientific

Oregon Scientific GP108 Bedienungsanleitung

Beliebte GPS Handbücher anderer Marken

Raven

Raven Cruizer II Handbuch

Hama

Hama 53118 Bedienungsanleitung

Garmin

Garmin SOUNDER 125 Bedienungsanleitung

Garmin

Garmin DEZL 580 Bedienungsanleitung

Jigabot

Jigabot EX Bedienungsanleitung

Pointer

Pointer Cellocator CelloTrack XT LTE Installationsanleitung

Queclink

Queclink GV55LITE Bedienungsanleitung

Voxson

Voxson Voxtrack GPS500 Gebrauchsanweisung

Garmin

Garmin ECHOMAP PLUS Bedienungsanleitung

Starcom Systems

Starcom Systems Kylos Compact Bedienungsanleitung

Garmin

Garmin 15 H Series Bedienungsanleitung

Cobra

Cobra Marine MC 600Ci Bedienungsanleitung

Cellocator

Cellocator CelloTrack T Bedienungsanleitung

Enfora

Enfora Mini-MT GSM2228UG001 Bedienungsanleitung

Magellan

Magellan eXplorist 100 Bedienungsanleitung

LTE

LTE G50B Bedienungsanleitung

Garmin

Garmin DEZL OTR500 Bedienungsanleitung

SkyGolf

SkyGolf SkyCaddie SG1 Bedienungsanleitung