Oricom TP30 Bedienungsanleitung
User Guide
TP30
Amplified Speakerphone
Please keep this user guide for future reference.
Keep this user guide for future reference. Always retain your proof of purchase in case of
warranty service and register your product on line at: AUSTRALIA: www.oricom.com.au
1
Table of contents
General Information ...............................................................2
Installation.............................................................................4
Wall Mounting........................................................................5
Location of controls ...............................................................6
Basic settings ........................................................................8
Operation...............................................................................9
The Phone Book...................................................................13
Memory...............................................................................15
Caller ID............................................................................... 17
Customer Support................................................................19
Warranty Terms and Conditions (Australia) ...........................20
Need Help?
If you need assistance setting up or using your Oricom product now or in
the future, call Oricom Support.
Australia 1300 889 785
www.oricom.com.au
Mon-Fri 8am – 6pm AEST
New Zealand 0800 67 42 66
www.oricom.co.nz
Mon-Fri 10am – 8pm NZST
2
General Information
General Information
WARNING
It is very important that you read the User Guide
carefully as it contains detailed information on
installation, programming and operational issues which
you will need to be aware of to ensure the Phone
operates properly. Following is a list of some of the
important issues and warnings which you need to be
aware of.
This is a summary of the important issues you must
still read the User Guide in full.
t 5IFUFMFQIPOFJTEFTJHOFEGPSJOEPPSVTFPOMZ%POPU
install the telephone in areas where there is the risk
of an explosion, excessive exposure to smoke, dust,
vibrations, chemicals, moisture and heat.
t %POPUVTFZPVSUFMFQIPOFEVSJOHBOFMFDUSJDBM
thunderstorm as it is possible to get an electric
shock. Refer to information contained in Telstra White
pages directory.
t 5IFFBSQJFDFPGUIFIBOETFUNBZBUUSBDUTNBMMNFUBM
objects such as staples and pins. Care should be
taken when placing the handset near these items.
t %POPUJOTUBMMJOEBNQMPDBUJPOTTVDIBTBCBUISPPN
or laundry, do not expose the unit to direct sunlight.
t 5IJTQIPOFJTEFTJHOFEGPSDPOOFDUJPOUPB145/
telephone line or an analogue extension port of a
PBX system. If you connect this device to a digital
extension of a PBX, damage may result to the PBX.
N13134
The A-Tick symbol indicates that this product complies with all current
Australian ACMA standards.
3
General Information
Notes for operation in New Zealand
The grant of a Telepermit for any item of terminal equipment indicates
only that Telecom has accepted that the item complies with the minimum
conditions for connection to its network. It indicates no endorsement
of the product by Telecom, nor does it provide any sort of warranty.
Above all, it provides no assurance that any item will work correctly in
all respects with another item of Telepermitted equipment of a different
make or model, nor does it imply that any product is compatible with all
of Telecom’s network services.
This equipment shall not be set to make automatic calls to the Telecom
“111” Emergency Service.
This equipment may not provide for the effective hand-over of a call to
another device connected to the same line.
This equipment should not be used under any circumstances that may
constitute a nuisance to other Telecom Customers.
REN (RN for New Zealand)
The REN (Ringer Equivalence Number) or (RN) is of signicance only if you
wish to connect more than 1 telephone to your telephone line. A standard
telephone line has a maximum REN capacity of 3 (RN of 5). It is possible
to connect 3 devices with a REN of 1 (RN of 1) with no degradation to the
product’s performance. Exceeding this limit may cause the volume of the
ringer in any phone to decrease or not ring at all.
4
Installation
Installation
Installing batteries (supplied) in the phone
Warnings
Before opening the battery compartment, make sure the telephone
is disconnected from the telephone line.
You must install 4 AAA Alkaline batteries (supplied) in the phone
base to retain memory and CID information when the telephone
is disconnected from the line.
1. Use a at-blade screwdriver or tip of a pen to lift and remove the
battery compartment door.
2. Insert four AAA batteries into the compartment as indicated by the
polarity symbols.
3. Snap the battery compartment door back into place.
When this symbol appears on the display or the display dims, replace
the batteries. Always use 4 new high quality Alkaline AAA batteries.
If you have a Broadband line
If you connect your telephone to a line with a broadband connection, you
must connect an in line lter (not supplied) between the telephone socket and
your phone base to ensure that your broadband and TP30 will work properly.
If you do not install the lter you will experience interference on the
cordless phone and your Broadband may suffer dropouts. Please refer to
the user guide of the in line lter for installation.
In a home with broadband, every telephone, fax or answering system
must have a in-line lter connected, not just the one at the telephone
point that your modem is connected to.
Additional in-line lters can purchase from electronic stores.
Connecting the telephone
1. Plug one end of the curly cord into the socket on the handset.
2. Plug the other end of the curly cord into the left side of the phone.
3. Plug one end of the telephone line cord into the jack at the back of the
base, and the orher end into the wall socket.
4. Pick up the handset and listen for dial tone.
5
Wall Mounting
Wall Mounting
Desk Mounting
Fit the bracket as shown in the illustration. Insert the brackets three tabs
into the matching slots on the bottom of the phone and click into place.
Caution: Before installing or changing
the battery, make sure that the
telephone is not connected to the
telephone network or the mains power.
Made in China
Wall Mounting
1. Fit the bracket as shown in the illustration. Insert the braqckets three tabs
into the matching slots on the bottom of the phone and click into place.
%SJMMUXPIPMFTWFSUJDBMMZPOFBCPWFUIFPUIFSNNBQBSUBOEMFBWF
the screws protruding from the wall by 5mm.
3. Turn around the handset hook (located by the hook switch) by 180
degress, so it will hold the handset in place when the phone is
mounted on the wall.
4. Position the mounting holes on the base of the phone over the two
protruding screws on the wall plate or on the wall. Gently push the
phone ush against the wall plate then slide the phone downwards
locking it into place.
Bracket postion for
desk mounting
Bracket postion for
wall mounting
6
Location of controls
STORE
MUTE
MUTE
MEM CID
CALL BACK
RECALL REDIAL
M1 M2 M3 M4
1
2
3
45 6 7
8
9
10
11
12
13
14
15
16
17
18
19
20
DELETE/OK
21
7
Location of controls
1. Hook switch
2. Handset hook
3. Mute button
4. Store button
5. Recall button
6. Redial button
7. Speakerphone button
8. Keypad
9. Memory buttons (M1, 2, 3, 4)
10. Memory paper card
11. MEM button
$BMMFS*%CVUUPO
13. Phonebook button
14. Message button
15. / Buttons
%&-&5&0,CVUUPO
17. Call back button
%JTQMBZ
3JOH-&%JOEJDBUPS
20. Mute button (on handset)
21. Curly cord socket
22. Message Indicator
23. Ringer Hi/Low/Off switch
24. Recall 600/100 switch
25. MW V-/V+/HV/Ringer switch
26. Telephone line socket
27. Receiver volume
28. Speaker volume
RECALL
600/100
RINGER
HI LOW OFF
MW
REC VOL SPK VOL
23
27 28
24 25 26
22
V-/V+/HV/RINGERV
8
Basic settings
Basic settings
1. After installing the batteries, the display should flash the word
ENGLISH.
If not press and hold for approximately 4 seconds.
2. Select the desired language using or . Press DELETE/OK button.
4FMFDUUIFEFTJSFEDPOUSBTUTFUUJOH%FGBVMUVTJOH or .
Press DELETE/OK button.
4. Set the month using or . Press DELETE/OK button.
5. Set the day using or . Press DELETE/OK button.
6. Set the hour (00-23) using or . Press DELETE/OK button.
7. Set the minute using or . Press DELETE/OK button.
Display(LCD)Contrast/Time Setting
If you wish to change the language, contrast, time settings at a later date,
press and hold button for approximately 4 seconds and repeat steps 2-7
above.
Select country version
1. For New Zealand Select Recall = 600 on the switch on the rear side of
the unit, New Zealand Recall/ash time is 600ms, the unit is now set
VQUPJOTFSUXIFOSFDFJWJOH$*%MPHJOBDDPSEBODFXJUI5FMFDPN
NZ requirements. Or for Australia Select Recall = 100.
2. Lift and replace the handset to initialize.
NOTE:
*GUIFTXJUDIJTJOUIFJODPSSFDUQPTJUJPO$BMMFS*%BOEUIFSFDBMMGVODUJPO
will not operate correctly.
Andere Handbücher für TP30
1
Inhaltsverzeichnis
Andere Oricom Telefon Handbücher
Oricom
Oricom TP9 Bedienungsanleitung
Oricom
Oricom TP68 Bedienungsanleitung
Oricom
Oricom TP58 Bedienungsanleitung
Oricom
Oricom CARE90 Bedienungsanleitung
Oricom
Oricom TP88 Bedienungsanleitung
Oricom
Oricom Care10 Bedienungsanleitung
Oricom
Oricom TP29 Bedienungsanleitung
Oricom
Oricom HP200 Bedienungsanleitung
Oricom
Oricom Pro900 Bedienungsanleitung
Oricom
Oricom CARE80S Bedienungsanleitung
Oricom
Oricom TP150 Bedienungsanleitung
Oricom
Oricom TP110 Bedienungsanleitung
Oricom
Oricom care60 Bedienungsanleitung
Oricom
Oricom TCR10 Bedienungsanleitung
Oricom
Oricom Professional Series PRO90 Bedienungsanleitung
Oricom
Oricom TP9 Bedienungsanleitung
Oricom
Oricom CARE80 Bedienungsanleitung
Oricom
Oricom TP6 Bedienungsanleitung
Oricom
Oricom TP30 Bedienungsanleitung
Oricom
Oricom CARE95 Bedienungsanleitung
