Function Setting
功能設定
7
遙控器
Remote Control
5.1 Auto Mode(AUTO) " ":
- When the room temperature is below 25℃,the Fan will work as speed 1 for 15
seconds, then speed 2 for 15 seconds, then return to speed 1 for 15 seconds...
(as cycle).
- When the room temperature is between 25℃and 28℃, the Fan will work as
speed 3 for 15 seconds,then speed 4 for 15 seconds,then return to speed 3 for
15 seconds...(as cycle).
- When the room temperature is between 29℃and 34℃, the Fan will work as
speed 5 for 15 seconds, then speed 6 for 15 seconds, then return to speed 5 for
15 seconds...(as cycle).
- When the room temperature is above 34℃the Fan will work as speed 7 for 15
seconds,then speed 8 for 15 seconds,then return to speed 7 for 15 seconds...
(as cycle).
6. 定時設置(TIMER) : 按下定時設置鍵" "，選定12個不同的自動關機時間，分別由1小
時至12小時，並顯示於LED顯示屏。
6. TIMER: Pressing the Timer key" " to set desired auto power off time, There are 12
time intervals, from 1-hour to 12-hour, and displayed on the LED display.
智能直流風扇
AI DC Stand Fan
Maintenance
清理及維護
警告：不使用風扇時，經常保持拔除電源，及切勿將風扇浸於水或其他液體中。在清潔本
風扇前，先將風扇關掉及把電源線從插座拔出。
Housing & Guard: Clean the outside of the Fan with a soft cloth, to remove presistent dirt
or grime wipe down with a cloth that has been dampened with warm soapy water.
扇葉：將前網下方螺絲鬆脫後取出前網，使用濕潤軟布抹擦清潔扇葉。清潔後，放回前網並
用螺絲鎖緊，才可使用風扇。
Blade: Loose the screw and pull the front guard out. Clean the blade with a soft damp
cloth, place back and fix the front guard with the screw after cleaning.
注意：切勿使用含有腐蝕性的清潔劑或溶液清理風扇。
儲存：連同使用說明，把風扇存放於清涼及乾爽的地方。
WARNING: ALWAYS UNPLUG THE POWER CORD BEFORE MOVING OR SERVICING. DO NOT
IMMERSE THE FAN IN WATER! BEFORE CLEANING, MAKE SURE THAT THE UNIT HAS BEEN
SWITCHED OFF AND IT IS UNPLUGGED FROM THE MAIN OUTLET.
外殼及前後網：清理時切勿將風扇浸於水或其他液體中。使用濕潤軟布抹擦清潔，頑固污垢
可用軟布沾上含肥皂的溫水抹擦。
CAUTION: Do NOT use gasoline, benzene, thinner, harsh cleaners, etc., as they will damage
the Fan. NEVER use ALCOHOL or any other SOLVENTS.
STORAGE: Store the Fan with these instructions in the original box in a cool and dry place.
A
