Orion WB-71 Bedienungsanleitung

Installation and User’s Guide

BIG SCREEN FLAT LCD DISPLAY MOUNT MODEL

B-71

ALL MOUNT

BRACKET

http://www.orionimages.com

All contents of this document may change without prior notice, and actual product appearance may differ

from that depicted herein

Installation and User’s Guide

htt

://www.orionima

es.com

TABLE OF CONTENTS

Warning Statements ............................................................................................................ 4

Parts List .............................................................................................................................

Installation Tools ..................................................................................................................

Mounting Bracket Installation

...............................................................................................

WB-71 Installation ................................................................................................................ 12

Installing the Flat Panel Display (WB-71) ..............................................................................

Technical Specifications

......................................................................................................

Warranty ................................................................................................................................

Contact ................................................................................................................................

2 7300 Bolsa Avenue, Westminster CA92683 / Tel: 714-766-6300 / Fax: 714-766-6310 pg2

Installation and User’s Guide

htt

://www.orionima

es.com

Warning Statements

WARNING THE WALL STRUCTURE MUST BE CAPABLE OF SUPPORTING AT LEAST A

MAXIMUM WEIGHT OF 50 LBS. IF NOT, THE WALL MUST BE REINFORCED.

PROPER INSTALLATION PROCEDURE BYAQUALIFIED SERVICE TECHNICIAN,

AS OUTLINED IN THE INSTALLATION INSTRUCTIONS, MUST BE ADHERED

TO. FAILURE TO DO SO COULD RESULT IN SERIOUS PERSONAL INJURY, OR

EVEN DEATH.

WARNING SAFETY MEASURES MUST BE PRACTICED AT ALL TIMES DURING THE

INSTALLATION OF THIS PRODUCT. USE PROPER SAFETY GEAR AND TOOLS

FOR THE INSTALLATION PROCEDURE TO PREVENT PERSONAL INJURY.

PRIOR TO THE INSTALLATION OF THIS PRODUCT, THE INSTALLATION

INSTRUCTIONS SHOULD BE READ AND COMPLETELY UNDERSTOOD. THE

INSTALLATION INSTRUCTIONS MUST BE READ TO PREVENT PERSONAL

INJURY AND PROPERTY DAMAGE. KEEP THESE INSTALLATION

INSTRUCTIONS IN AN EASILY ACCESSIBLE LOCATION FOR FUTURE

REFERENCE.

WARNING

Indicates that the power plug is to be disconnected from the power outlet.

Safety precautions must be taken at all times.

Warning and Caution statements.

A secure structure must support the weight, or load, of the display. When mounting

to a wall that contains wooden studs, dead center of the wooden stud must be

confirmed prior to installation.

Do not install on a structure that is prone to vibration, movement or chance of

impact. Failure to do so could result in damage to the display and/or damage to the

mounting surface.

Do not install near heater, fireplace, direct sunlight, air conditioning or any other

source of direct heat energy. Failure to do so may result in damage to the display

and could increase the risk of fire.

At least two qualified people should perform the installation procedure. Injury and/or

damage can result from dropping or mishandling the display.

Recommended mounting surfaces: wooden studs and solid-flat concrete. If the

mount is to be installed on any surface other than wooden studs, use suitable

hardware (which is commercially available).

Contact Orion Images with any technical/ installation questions.

3 7300 Bolsa Avenue, Westminster CA92683 / Tel: 714-766-6300 / Fax: 714-766-6310 pg3

Installation and User’s Guide

htt

://www.orionima

es.com

Part List

NOTE This wall mount is shipped with all proper installation hardware and

components. Make sure that none of these parts are missing and/or

damaged before beginning installation. If there are parts missing and/or

damaged, please stop the installation and contact Orion Images.

714

766

6300

Mounting

Brackets

(

2ea

)

WB-71 Wall

Plate (1ea)

5/16” x 3” Lag Bolts

(wooden studs only) –

(12ea)

5/16” Flat

Washers (12ea)

M6 x 30mm Lateral Shift

Locking Screws (2ea) Griplates™

(8ea)

M6 x 12mm Safety

Knobs (2ea)

Thread Depth

Indicator

Installation Tools

Phillips Head Screw Driver, Soft Material/ Blanket, 5/16” Socket and Wrench

Pencil Tape Measure, Drill Gun,

Level

4 7300 Bolsa Avenue, Westminster CA92683 / Tel: 714-766-6300 / Fax: 714-766-6310 pg4

Installation and User’s Guide

htt

://www.orionima

es.com

5 7300 Bolsa Avenue, Westminster CA92683 / Tel: 714-766-6300 / Fax: 714-766-6310 pg5

Installation and User’s Guide

htt

://www.orionima

es.com

lon s

acers and flat washers actual size

NOTE The nylon spacers may be stacked to achieve proper spacing.

1/2" Nylon spacers

(Qty 6)

(large)

5/16" Flat washers

(metal)

(Qty 6)

1/4" Nylon spacers

(Qty 6)

6 7300 Bolsa Avenue, Westminster CA92683 / Tel: 714-766-6300 / Fax: 714-766-6310 pg6

Installation and User’s Guide

htt

://www.orionima

es.com

Thread Depth Indicato

1. Insert the thread depth indicator (supplied) through the thread inserts found on the back of the

flat panel to make sure the inserts measure the same full depth and mark it (Figure 1).

2. Locate the correct diameter screw for the thread insert. Compare your marking to the screws

(supplied).

3. If your selected screw is longer than the marking on the thread depth indicator, DO NOT USE

this screw.

4. The screw length must not bypass the marking. Select another screw size (Figure 2 and 3),

until you find one that comes closest to your mark without going past.

7 7300 Bolsa Avenue, Westminster CA92683 / Tel: 714-766-6300 / Fax: 714-766-6310 pg7

Installation and User’s Guide

htt

://www.orionima

es.com

Mounting Bracket Installation

NOTE: Proper installation procedure by qualified personnel as outlined in the installation

instructions must be adhered to. Failure to do so could result in serious personal injury

and

ossible dama

e to the flat

anel.

WARNING: INVERT THE FLAT PANEL PLACE IT ON A SOFT, FLAT SUFRACE TO

PREVENT DAMAGE TO THE FLAT PANEL. USE A BLANKET, FOAM, ETC.

FAILURE TO DO SO WILL RESULT IN DAMAGING THE FLAT PANEL. DO NOT

LAY THE FLAT PANEL ON THE FLOOR WITHOUT ANY PROTECTION TO THE

GLASS. THE FLAT PANEL IS HEAVY AND FRAGILE. AT LEAST (2) QUALIFIED

PERSONNEL ARE STRONGLY RECOMMENDED FOR INSTALLATION OF

THIS PRODUCT. FAILURE TO DO SO COULD RESULT IN SERIOUS INJURY

AND POSSIBLE DAMAGE TO THE FLAT PANEL.

1. Once the flat panel is inverted, use a measuring tape to find the center of your flat panel

measuring from outside to outside of the chassis (Figure 4).

2. Using a pencil lightly mark the center of your flat panel (Figure 5).

8 7300 Bolsa Avenue, Westminster CA92683 / Tel: 714-766-6300 / Fax: 714-766-6310 pg8

Installation and User’s Guide

htt

://www.orionima

es.com

3. Install the nylon spacers (if needed) to the mounting points on the flat panel (Figure 6).

4. Lay the left and right mounting brackets (stamped arrows facing out) - (Figure 7).

5. Match the center of viewing guide with the centerline you marked in Step 1 (Figure 8).

6. The mounting brackets are designed with a center of viewing guide on the outside (Figure 9).

9 7300 Bolsa Avenue, Westminster CA92683 / Tel: 714-766-6300 / Fax: 714-766-6310 pg9

Installation and User’s Guide

htt

://www.orionima

es.com

7. The Griplates™ have M4, M5 M6 and M8 hole patterns to fit the hardware that your flat

panel requires.

8. Once the mounting brackets are aligned secure the Griplate™ to the flat panel. Use (1)

Griplate™ per mounting point (Figure 11).

If your plasma uses M8 x 20 Phillip screws. Use the M8 mounting points (Figure 10).

EXAMPLE:

NOTE: The dimples of the top plates have to be facing up and the bottom dimples must be

facing down.

10 7300 Bolsa Avenue, Westminster CA92683 / Tel: 714-766-6300 / Fax: 714-766-6310 pg10

Inhaltsverzeichnis

Andere Orion Rack & Stand Handbücher

Beliebte Rack & Stand Handbücher anderer Marken

Salamander

Salamander Acadia AC/W/L400/WH Bedienungsanleitung

Fohhn

Fohhn VAT-09 Benutzerhandbuch

ricoo

ricoo FS0522 Bedienungsanleitung

AMSOIL

AMSOIL BMK-22 Kurzanleitung

Kargo Master

Kargo Master 48220 Bedienungsanleitung

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Bedienungsanleitung

ricoo

ricoo S1222 Bedienungsanleitung

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Bedienungsanleitung

VidaBox

VidaBox VB MNT FFS2 Bedienungsanleitung

Welch Allyn

Welch Allyn 48960 Bedienungsanleitung

Arkon

Arkon CM035-ST-2 Bedienungsanleitung

PROEL

PROEL PLWIN60C Bedienungsanleitung

Agilent Technologies

Agilent Technologies E2609B Bedienungsanleitung

Mustang

Mustang MV-ARM4 Bedienungsanleitung

Mounting Solutions

Mounting Solutions WRM-320 Bedienungsanleitung

ShelterIt

ShelterIt 21208 Bedienungsanleitung

Pyle

Pyle PMKSPAD1 Bedienungsanleitung

SPL

SPL RackPack?4 1040 Bedienungsanleitung