Orite ic301 Bedienungsanleitung
- 1
1.System Features
1-1. Package Contents
1-2. System Requirements
1-3. Hardware Description and Features
1-4. IP-Cam Hardware Specification
2. Installation
2-1. IP-Cam Hardware Setup
3. Accessing the Camera
3-1. Change the IP-Cam IP Status
3-2. On the LAN with DHCP Server
3-3. On the LAN without DHCP Server
3-4. On the LAN use with the ADSL Router
3-5. Access the IP-Cam by ordinary user login.
4. Camera Control
4-1. Quality Setting
4-2. Resolution Setting
4-3. Frequency Setting
4-4. Camera Advanced adjust
4-5. Split setting
4-6. Rotate Setting
4-7. Operation Mode
4-8. Delete a Camera
5. Configuration
5-1. System Settings
5-2. User Setup
5-2-1. Current User
5-2-2. Account Management
5-3. Motion Detection
5-3-1. Motion Detection Enabling / Disabling
5-3-1. Set Detection Area
5-3-2. Motion detected mail function
5-3-3. Motion detected mail
5-3-4. Motion detected message on the main window.
5-3-5. FTP uploads when motion detected.
5-4. Network Setup
- 2
5-4-1. Manual Setting
5-4-2. connect to ADSL by PPPOE mode
5-4-3. Dynamic DNS
5-5.Audio Setup
5-5-1.Audio Configure
5-6.DDNS Setup
5-6-1.DDNSServer
6. Image Recording
6-1. Save as JPEG
6-2. Save as AVI
6-3. Save Current Picture As…
7. View Log File
8. On Line Help
9. Hardware Reset
10. Accessing IP-Cam over the Internet
10-1. WAN IP Address
10-2. Network Address Translation (NAT)
10-3. Port Forwarding
9-4. Default Gateway
11. Network Utilities
11-1. Determining your IP Address and Network Settings
11-2. Using PING
11-3. IPEdit
12. Router Configuration
Introduction
IP-Cam is a color camera with built-in IP address, Ethernet software stacks and protocols.
Plug IP-Cam directly to a RJ45 Ethernet port and watch the camera site from anywhere
- 3
around the world. Connecting directly to Ethernet networks, the IP-Cam is a standalone digital
network camera requiring no extra server at the camera site. With the motion detection trigger
function, IP-Cam will provide you with the necessary security with the easiest installation.
Plug the IP-Cam into your network and you're ready to see what's happening even when
you're not there! Accessing the camera is as simple as surfing the web, just point your
browser to the camera's onboard home page. You'll find everything you need to view, and do
video recording from the camera from anywhere on your network or even over the Internet!
The IP-Cam is accessed with the IP address directly and the images are viewed by standard
Web browsers.
1. System Features
1-1. Package Contents
1. IP-Cam (IC-301)
2. Power Adapter
3. Red Color 10/100 Mbps Ethernet LAN Cable (MDI / X, Cross over LAN cable)
4. Blue Color 10/100 Mbps Ethernet LAN Cable (MDI)
5. IP-Cam installation CD-ROM
6. User’s Manual
1-2. System Requirements
To view the camera web page
Web Browser – Internet Explorer for Windows 5.0 or higher
PC with Windows 98, Me, 2000, or XP connected to LAN
To run the included software (IPEDIT) applications
PC - Intel Pentium II or equivalent, 300MHz or above, 64MB RAM, 150 MB Hard Disk
Space, 800x600 resolution with 16- bit color
Windows 98, Me, 2000, or XP
To access cameras from the Internet
Broadband Internet Connection (DSL, Cable Modem) with min. 128k upload speed
1-3. Hardware Description and Features
Stand-alone network camera for flexible installation.
Simple installation and multiple mounting methods.
Embedded Web Server Supported.
No computer is needed at the monitored site.
Access live video via web browser at anytime and any place for remote surveillance and
- 4
management.
2 default HTTP ports supported, they can be changed to fit different network
environments.
Built-in Motion Detection for security at no extra cost.
Standard JPEG Image Format.
Record AVI (Video) or Motion JPEG images onto hard disk for future viewing.
Capture snapshots and video to your PC.
Password protection, Supervisor password system for you to decide who has authority to
access the cameras.
Real-Time Motion Detection for E-mail and FTP alert.
E-Mail the Detected Images to preset e-Mail address.
FTP the Detected Images to preset FTP server.
Directly connect to ADSL by PPPoE, mail the IP setting to preset mail address.
5 different resolutions, 5 different image quality.
3 different Light Frequencies: Outdoor, Indoor 50Hz and Indoor 60Hz.
Unlimited number of users concurrently browsing the same camera.
E-Mail notification for sharing or notifying information actively to the connected party.
Support Multi camera windows
Camera Naming Support.
Web console configuration interface.
LAN/WAN interface supported.
Support Fixed IP or Dynamic IP by DHCP.
Log List report.
Built-in Microphone
Network
Fixed IP.
Dynamic IP by DHCP.
Directly connect to ADSL by PPPoE, mail the IP setting to preset mail address.
User Management
User Management for Add User, Delete User, and Change Password.
Administrator, privileged user to change any settings.
General users, view images only.
Camera Control
Layout 1x1, 2x2, 3x3, 4x4.
Resolution: 160x120, 176x144, 320x240, 352x288, 640x480.
Quality: Low, High, Medium, Clarity, Motion
Image Rotate / Flip.
VideoAdjustment: Brightness, Contrast, Saturation, Hue, Sharpness
Motion Detection
Software Real-Time Motion Detection.
Selected Region Provided.
E-Mail the Detected Images to preset e-Mail address.
- 5
FTP the Detected Images to preset FTP server.
Browser Support
IE only (ActiveX Control) Save the current image local PC.
ActiveX controls : ActiveX controls support full functions, including the Right Mouse
Button Menu control.
Utility
IPEDIT.EXE to scan the Installed IP-Cams and change the Camera Name and IP
Address
1-4. IP-Cam Hardware Specification
Built-in web server allows camera to be accessed by standard Internet browser
Network, RJ-45: 10Base-T/100Base-TX Ethernet networks
Network ready, IP addressable (no PC required.)
Motion-JPEG based compression
Size: 91 mm x 65 mm x 53 mm
Weight: 163 g
Power Supply: 5.1 VDC/2A
2. Installation
Before installing the IP-Cam, you should have an available Ethernet LAN connection (RJ-45
port). To view the camera’s image or make any manual configuration changes, you will need a
Windows PC with Internet Explorer 5.0 or higher and connection to the LAN.
2-1. SWEEX Audio IP-Cam Hardware Setup
- 6
1. Insert the power-cord to IP-Cam.
2. Insert the Network Line to IP-Cam and Computer LAN Card RJ-45 port (Red color LAN
Cable).
3. Power-On the Computer for IP setup.
4. Use the IPEdit.exe tools to find the IP-Cam.
5. Use IE to view the IP-Cam image.
Step 1. Plug the Ethernet cable into IP-Cam
Plug the included RED Color Ethernet cable into the
RJ- 45 connector at the back of the camera as
shown.
Step 2. Plug the Ethernet cable into PC
1. Temporarily disconnect the existing network
cable from the PC.
2. Plug the other end of the Ethernet cable into any
available LAN port. A typical home router/gateway
connection is shown on the left.
Step 3. Connect the Power Supply to the IP-Cam
Connect the power supply to the back of the
IP-Cam as shown, and then plug the supply into an
available power outlet.
Step 4. Ensure the IP-Cam power light is lit
When the IP-Cam is connected with power, the
LED light on top of the IP-Cam will light up. This
indicates that the IP-Cam is powered on.
Step 5. Using IPEdit.exe to test the IP-Cam
1. Use IPEDIT.EXE to find the installed IP-Cam.
2. The IP-Cam without IP allocated by DHCP will
- 7
Step 7. Connect IP-Cam to the ADSL Modem
or LAN Hub
1. Remove the red network cable from the PC
when all the settings are completed.
2. Reconnect the existing network cable to the
PC.
3. Using the blue network cable provided,
connect one end to the IP-Ca, and the other, to
the ADSL model of LAN hub.
- 8
- 9
3. Accessing the Camera
3-1. Change the IP-Cam IP Status
Using the IP-Edit, you could select the different
network options.
The PC network options will display the Gateway
and Netmask network settings, which you can
edit with IP-Edit.
Alternatively, you may contact your network
system administrator to provide you with the
details of your network Gateway and Netmask
settings.
Enter the Camera’s IP number.
If you allow outsiders to see the IP-Cam, please enter another IP address.
If you only want the IP-Cam to be viewed in the internal network, you could enter a local
IP number Example: 192.168.0.99.
Clicking “Submit” will update all the changes made to the IP-Camera settings.
- 10
Option Labels Translations Functions
Name: Name of the
Camera Options for the name of the camera
Gateway Gateway Reviews through your network options
IP Network Address
Netmask Network Reviews through your network options
HTTP Port 1 HTTP Port 1 80
HTTP Port 2 HTTP Port 2 IP address given by the administrator, refrain from
changing it
MAC MAC Address
Example:
Hinet uses the IP address number:
Use IPEDIT to enter Hinet assigned IP address.
Launch IE Browser.
Go to IP-Cam ÆNetwork Setup ÆPPPoE.
Set ADSL User ID and Password provided by Hinet.
Click Submit and restart the PC.
3-2. On the LAN with DHCP Server
3-3. On the LAN without DHCP Server
Use IPEDIT.EXE to find the installed
IP-Cam.
The IP-Cam without IP allocated
by DHCP will have a default IPAddress
of 169.254.xx.xx.
1. Use IPEDIT.EXE to find the
installed SWEEX Audio IP-Cam.
2. Select this IP-Cam in the Camera
Lists Window.
3. The default configurations will be
shown in the right window.
4. Update the Camera’s IP status.
Inhaltsverzeichnis
