Osram LIGHTIFY Bedienungsanleitung

www.osram.com/lightify-4you

LIGHTIFY Home - Onboarding-Guide

Onboarding OSRAM LIGHTIFY 1

What do you need to get started?

Please note:

•Check the transmission frequency of your router. You

can integrate LIGHTIFY at 2.4 GHz, only.

•Please change the presettings (automatic selection)

from 1 to 10 (channels 11, 12 and 13 are not

supported).

www.osram.com/lightify-4you

LIGHTIFY Home –Onboarding-Guide

Onboarding OSRAM LIGHTIFY 2

First Steps

Please choose “Get

started”

a) Pleasegive

permissiontothe

LIGHTIFY App to use

the camera

b) Scan the QR code or

enter the serial

number(S/N)which

you canfindon the

back side of the

Gateway.

a) Pleasecopy the

activationcode from

the e-mail (you can

also enter the code

manually).

b) Get News about

LIGHTIFYby

pressing the key

„Yes“ and tap on

„PROCEED“.

Please enter your name,

e-mail address,

password, and accept

the terms and

conditions.

Please use a password

with a minimum of six

characters.

Press “CREATE MY

ACCOUNT” to continue.

Afterwards you will

receive an activation

code by e-mail.

Please note:

▪The activation code is only valid for 60 minutes.

▪Please check your spam folder, if you did not receive a lightify e-mail in your inbox.

▪In case you have not received an activation code, please write an e-mail to our customer support lightify@osram.com or repeat the process with

another domain (for example @gmail.com or @icloud.com)

▪When contacting our customer support, please add a picture of the back side of your Gateway with the identifiable serial number S/N.

www.osram.com/lightify-4you

LIGHTIFY Home - Onboarding-Guide

Onboarding OSRAM LIGHTIFY 3

First Steps

Please press “PROCEED”

to configure your Gateway.

Please connect the

Gateway with the power

socket to start the

configuration and press

„PROCEED“

“What´s new”

Get an overview about

all new features in

the LIGHTIFY App.

Press on the arrow to

continue.

On devices running with Android 8 or higher, the operating system

requires an app location tracking permission to verify the WiFi

connection. See step 12 to deactivate the permission. For further

information, see page 6.

www.osram.com/lightify-4you

LIGHTIFY Home - Onboarding-Guide

Onboarding OSRAM LIGHTIFY 4

First Steps

Please connect to the

WiFi hotspot of your

Gateway:

1. Copy the WiFi

password

2. Go to the WiFi

settings of your

mobile phone

3. Select the Gateway's

WiFi (Lightify-

XXXXXX) and enter

the password. The

connection to your

Gateway should now

be established.

4. Return to the

LIGHTIFY App and

press “PROCEED”

Please connect your

Gateway to your home WiFi.

a) If the WiFi list is not

displayed, please make

sure that the "mobile

data“ is switched off

b) Select your home WiFi

c) Enter the password of

your home WiFi

On devices running with

Android 9 or higher, the

operating system has to

track the device's

location (GPS), to

confirm the connection

to the required WiFi

network. You can

disable the permission

again in step 12. For

further information, see

page 6.

Gateway-

WLAN

In this step iPhone users

will be connected directly

to the Gateway Wi-fi.

Please click on Connect to

proceed to step 12.

If this doesn´t work or you

want to connect manually,

please tap on “press here”

and you will be directed to

step 11.

www.osram.com/lightify-4you

LIGHTIFY Home - Onboarding-Guide

Onboarding OSRAM LIGHTIFY 5

First Steps

14 15

Please confirm the

displayed time zone or

adjust it manually and

press “PROCEED”

Please plug in your LIGHTIFY

or compatible ZigBee®

Devices:

•Please select the device

you want to add

•Please follow the

instruction on the opening

screen

•Lights & Plugs: if the device

is not listed, please turn it

off and then on

•You will find the added

devices in the list. If the

device has been installed

correctly, you will get an

optical or acoustical

feedback.

For information about the integration of additional ZigBee® devices,

such as lamps, lights, switches, or sensors, please see our App

Guide.

Please find more information about when your

“Gateway is not connected”

1) Please reset the Gateway by pushing the key for 5 seconds

2) Please plug your Gateway out and plug it in again and press

“DONE”

3) Please start the onboarding process again at step 6 in this

manual

1 2

13 b

a) The Gateway is now connecting to the WiFi

b) Once your system is connected, the Gateway LED turns

green. When the LED turns orange, the connection with the

home WiFi has failed (see page 5)

c) Android 8 or higher: you have now the option to deactivate

the location permission in the “Location settings”

abc

www.osram.com/lightify-4you

Additional information for Android user

Onboarding OSRAM LIGHTIFY 6

Operating systems 8 or higher

a) Press „Allow“ to activate the location tracking in the

LIGHTIFY App—you will automatically get forwarded to the

next step. After pressing „Deny“, screen b) opens.

b) Please press on „Retry“ to confirm the location tracking—

this is needed to successfully connect the Gateway with

your home WiFi. After pressing „Skip“, screen c) opens.

c) When pressing „OK“, the screen „Connect to Gateway“

opens. Please go to the WiFi settings of your mobile phone

and check, if the connection has been established.

a) Please press „OK“ to enable the device's location tracking

for Google´s location service

b) After the location tracking has been activated, press "Retry"

to continue.

Furhter information to step 10: deactivate the location

tracking for Android 9 and higher

Further information to step 8: location permission for Android 8

and higher

On devices running with Android 8 or higher, the operating system needs to track the device's location (GPS), to confirm the

connection to the required WiFi network. See step 12 to deactivate the permission.

cab

www.osram.com/lightify-4you

Your LIGHTIFY system is not working after your router

has been replaced? This is what you can do:

Onboarding OSRAM LIGHTIFY 7

You have replaced your router and cannot reconnect to your Gateway? Please proceed as follows:

1. Note the Gateway SSID and password from the Gateway's back side.

2. The Gateway WiFi will be displayed in the list of available networks in your phone’s settings after 60

seconds. Now you can connect your device to the LIGHTIFY® Gateway (find SSID and password

on the Gateway's back side).

3. You can start the app once you are connected to the LIGHTIFY Gateway.

4. Finally, follow the instructions under: “Menu -> System settings -> Gateway: WiFi configuration”.

Now the initial operation is finished. Please see our app guide to change your settings.

For further information, see our FAQ’s, or contact our customer support under lightif[email protected]

Andere Osram Tor Handbücher

Osram

Osram Lightify Bedienungsanleitung

Beliebte Tor Handbücher anderer Marken

LST

LST M500RFE-AS Bedienungsanleitung

Kinnex

Kinnex Media Gateway Bedienungsanleitung

2N Telekomunikace

2N Telekomunikace 2N StarGate Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE Bedienungsanleitung

Telsey

Telsey CPVA 500 - SIP Bedienungsanleitung

RTA

RTA 460A-NNA4 Technisches Datenblatt

Shaw

Shaw Gateway HDPVR Bedienungsanleitung

ABB

ABB VSN900 Kurzanleitung

Commander

Commander Pulse Bedienungsanleitung

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Bedienungsanleitung

NETGEAR

NETGEAR C6300BD Bedienungsanleitung

Amit

Amit CDW531AM Bedienungsanleitung

HMS

HMS Netbiter EasyConnect EC150 Bedienungsanleitung

Huawei

Huawei EchoLife HG620 Bedienungsanleitung

AT&T

AT&T U-verse 3801 Gebrauchs- und Pflegehandbuch

Logic IO

Logic IO RTCU MX2 turbo Bedienungsanleitung

Suttle

Suttle MediaMAX MXM-521 Bedienungsanleitung