Sheet No.
Issue Date: Rev. B April 17, 2012
© 2012 SPX
3 of 3
Parts List & Operating Instructions Form No. 560035
Inspection and Maintenance
CAUTION: To prevent personal injury,
• Onlyqualiedpersonnelshallperforminspectionsandrepairstothisjack.
•Before each use, an approved inspector must inspect the jack for bends, cracks, dents, elongated
holes, or missing hardware. If damage is found, discontinue use.
•Use only those repair parts called out in the parts list in this document. Items found in the parts
list have been carefully tested and selected by OTC.
•Disconnect the air supply hose from the jack before perfoming any maintenance or repair procedure.
See Figure 2 for the location of the air supply connection.
Inspection
Before each use, an approved inspector must inspect the jack for bends, cracks, dents, elongated holes, or
missing hardware. If damage is found, discontinue use.
Maintenance
•Periodically lubricate the moving parts of the jack using lubricating oil or grease.
•Use only anti-wear hydraulic jack oil (215 SUS viscosity at 100° F). The use of alcohol, hydraulic brake
uid, or transmission oil could damage the seals in the cylinder and result in jack failure.
•Periodically check the oil level in the cylinder: 1) Retract the pistons completely. 2) Remove the ller plug.
The oil level should be between the two marks on the rod. Rell as needed using approved hydraulic uid.
3) Install the ller plug.
•The greatest single cause of failure in hydraulic units is dirt. Keep the jack clean and well lubricated to
prevent foreign matter from entering the hydraulic system.
•Whenever the jack is not in use, fully retract the pistons to reduce the risk of corrosion.
Repair
When repairing the jack, use only those repair parts called out in the replacement parts list in this
document. Items found in the parts list have been carefully tested and selected by OTC.
Disposal
At the end of the useful life of the jack, dispose of the jack according to all state, federal, and local
regulations.
PRODUCT INFORMATION
Recordserialnumberandyearofmanufactureforfuturereference.Seeproductidentication
label on unit for information.
5093B
Serial Number: Year of Manufacture:
