Oventrop ClimaCon F Bedienungsanleitung

ClimaCon F

Operating instructions

Page

ClimaCon F

Contents

1. General information ............................................................................................................5

1.1 Validity of the instructions...................................................................................................................... 5

1.2 Type plate............................................................................................................................................... 5

1.3 Scope of delivery .................................................................................................................................... 5

1.4 Contact................................................................................................................................................... 5

1.5 Declaration of conformity ....................................................................................................................... 5

1.6 Symbols used.......................................................................................................................................... 5

2. Safety-related information ..................................................................................................6

2.1 Correct use ............................................................................................................................................. 6

2.2 Warnings ................................................................................................................................................ 6

2.3 Safety instructions.................................................................................................................................. 6

2.3.1 Danger due to electric current...................................................................................................................... 6

2.3.2 Danger due to insufﬁcient personnel qualiﬁcation ...................................................................................... 6

2.3.3 Availability of the operating instructions ..................................................................................................... 6

3. Technical description ..........................................................................................................7

3.1 Installation scheme (example) ................................................................................................................ 7

3.2 Design .................................................................................................................................................... 7

3.2.1 ClimaCon F90, F100.................................................................................................................................... 7

3.2.2 ClimaCon F210, F310................................................................................................................................... 8

3.3 Functional description ............................................................................................................................ 8

3.3.1 App connection (F210, F310)....................................................................................................................... 8

3.3.2 Functions in detail ........................................................................................................................................ 8

3.4 Operating elements and displays............................................................................................................ 9

3.4.1 ClimaCon F90, F100.................................................................................................................................... 9

3.4.2 ClimaCon F210, F310................................................................................................................................... 9

3.5 Technical data....................................................................................................................................... 10

3.5.1 General ........................................................................................................................................................10

3.5.2 F90, F100....................................................................................................................................................10

3.5.3 F 210, F 310 .................................................................................................................................................. 11

4. Accessories and spare parts .............................................................................................. 12

5. Transport and storage ....................................................................................................... 12

6. Mounting .......................................................................................................................... 12

6.1 Tools required........................................................................................................................................12

6.2 Loosening of the mounting plate ...........................................................................................................12

6.3 Mounting of the mounting plate ............................................................................................................13

6.4 Electrical connection of the room thermostat........................................................................................13

6.4.1 Terminal assignment ...................................................................................................................................13

6.4.2 Connection of the room thermostat ...........................................................................................................15

6.4.3 Fitting of the control unit.............................................................................................................................15

6.5 App installation (F210, F310) ................................................................................................................15

7. Commissioning ................................................................................................................. 16

7.1 Establishment of the power supply........................................................................................................16

7.2 ClimaCon F210, F310 ............................................................................................................................16

7.2.1 ClimaCon F210, F310 - Teach-in .............................................................................................................16

3115500984-V07.11.2022

Page

ClimaCon F

Contents

7.2.2 ClimaCon F210, F310 - Removal of a room thermostat.............................................................................17

7.2.3 ClimaCon F210, F310 - Setting of the heating proﬁle ................................................................................17

7.2.4 ClimaCon F210, F310 - Conﬁguration........................................................................................................19

7.2.5 ClimaCon F210, F310 - Extended settings ................................................................................................ 20

8. Operation .........................................................................................................................20

8.1 ClimaCon F90, F100 ............................................................................................................................ 20

8.2 ClimaCon F210, F310 ............................................................................................................................21

8.2.1 Auto mode...................................................................................................................................................21

8.2.2 Eco mode ....................................................................................................................................................21

8.2.3 Manual mode...............................................................................................................................................21

8.2.4 Switching off................................................................................................................................................21

9. Troubleshooting................................................................................................................22

10. Maintenance .....................................................................................................................22

11. Disposal............................................................................................................................ 22

4115500984-V07.11.2022

ClimaCon F

General information

1. General information

The original operating instructions are written in German.

The operating instructions in other languages have been

translated from German.

1.1 Validity of the instructions

These instructions are valid for the Oventrop ClimaConF

room thermostats.

Product Item no.

ClimaCon F  ( V) 

ClimaCon F  ( V) 

ClimaCon F  ( V) 

ClimaCon F  ( V) 

ClimaCon F  ( V) 

ClimaCon F  ( V) 

1.2 Type plate

The type plate is located on the inside of the control unit.

1.3 Scope of delivery

• ClimaCon F room thermostat

• Safety and installation advice

1.4 Contact

OVENTROP GmbH & Co. KG

Paul-Oventrop-Straße 1

59939 Olsberg

GERMANY

www.oventrop.com

Technical service

Phone: +49 (0) 29 62 82-234

1.5 Declaration of conformity

All Oventrop ClimaConF room thermostats are

manufactured in compliance with the relevant provisions

of the relevant EU directives.

Oventrop GmbH & Co. KG hereby declares that the

wireless installation types ClimaCon F 210 and F 310

comply with the directive 2014/53/EU.

The full text of the EU declaration of conformity is

available at the following internet address:

www.oventrop.com.

1.6 Symbols used

Highlights important information and further

additions.

fAction required

• List





Fixed order. Steps  to X.

ZResult of action

5115500984-V07.11.2022

ClimaCon F

Safety-related information

2. Safety-related information

2.1 Correct use

Operational safety is only guaranteed if the product is

used as intended.

The ClimaCon F room thermostats are electronically

controlled operating devices for controlling surface

heating and cooling systems as well as heating and

cooling ceilings in detached houses or multiple dwellings.

Any use beyond and/or different from this is unintended

use.

Claims of any kind against the manufacturer and/or his

authorised representatives for damage resulting from

unintended use cannot be recognised.

Intended use also includes correct compliance with these

instructions.

2.2 Warnings

Each warning contains the following elements:

Warning symbo

SIGNAL WORD

Type and source of danger!

Possible consequences if the danger occurs or the

warning is ignored.

Ways to avoid the danger.

Signal words deﬁne the severity of the danger posed by a

situation.

WARNING

Indicates a possible danger with moderate risk. If the

situation is not avoided, death or serious bodily injuries

may result.

CAUTION

Indicates a possible danger with lower risk. If the

situation is not avoided, minor and reversible bodily

injuries will result.

NOTICE

Indicates a situation that can potentially result in damage

to property if not avoided.

2.3 Safety instructions

We have developed this product in accordance with

current safety requirements.

Observe the following instructions for safe use.

2.3.1 Danger due to electric current

Make sure that the product can be disconnected

from the power supply at any time.

(ClimaCon 230V only) The power supply you use

must meet the criteria of overvoltage categories

I or II according to DIN EN 60664-1. At the

installation site, observe any additional applicable

legal requirements derived from the IEC 60364 or

HD 60364.

Do not operate the product if there is visible

damage.

Work on the power supply may only be carried

out by a specialist electrician.

Disconnect the product from the power supply

at all poles for installation work, secure it against

being switched on again and check that no

voltage is present.

Only install the product in dry indoor areas.

For devices with a 24 V power supply, use a SELV

voltage source that is galvanically isolated from

the earth potential.

The setback input (ClimaCon F90, F100;

terminal 4) and the change-over input (ClimaCon

F100, F310; terminal 5) are not potential-

free. Avoid direct contact. Do not connect any

equipment here that could be damaged by

electrical potentials or whose function could be

disturbed.

2.3.2 Danger due to insufﬁcient personnel

qualiﬁcation

Work on this product may only be carried out by suitably

qualiﬁed specialist tradespeople.

Due to their professional training and experience as well

as knowledge of the relevant legal regulations, qualiﬁed

specialist tradespeople are able to carry out work on the

described product in a professional manner.

Operator

The operator must be instructed in the operation by

specialist tradespeople.

2.3.3 Availability of the operating instructions

Every person who works with this product must have read

and apply this manual and all applicable instructions.

The instructions must be available at the place of use of

the product.

Pass on these instructions and all applicable

instructions to the operator.

6115500984-V07.11.2022

ClimaCon F

Technical description

3.2.1 ClimaCon F90, F100

1 2

Fig. 2: Design F90, F100

1Control unit

2Mounting plate

3Terminal strip

4Opening for the cable feed

5Release clip

3. Technical description

3.1 Installation scheme (example)

Fig. 1: Installation scheme (example)

3.2 Design

7115500984-V07.11.2022

ClimaCon F

Technical description

3.2.2 ClimaCon F210, F310

1 2

Fig. 3: Design F210, F310

1Control unit

2Mounting plate

3Terminal strip

4Opening for the cable feed

5Release clip

3.3 Functional description

The ClimaCon F room thermostats are used to control the

temperature of surface heating and cooling systems as

well as heating and cooling ceilings in detached houses

and multiple dwellings.

The ClimaCon F room thermostats control electrothermal

actuators (e.g. up to 4 x Aktor T 2P) via a cable connection.

Valves are opened or closed via the electrothermal

actuators. If the room temperature is lower than the

setpoint temperature, the valves are opened; if the room

temperature reaches the setpoint temperature, the valves

are closed.

The setpoint temperature is adjusted at the room

thermostat.

All product variants offer the same basic functions.

3.3.1 App connection (F210, F310)

The ClimaCon F210 and F310 product variants can be

programmed via smartphone app.

Three modes are available for temperature control.

3.3.1.1 Auto mode

In Auto mode, the temperature control follows a time

proﬁle (see par. 7.2.3.2 on page 18).

3.3.1.2 Eco mode

In Eco mode, the temperature is constantly regulated to

the “Eco setback temperature” (see par. 7.2.3.1 on page

17).

ClimaCon F210, F310 devices are equipped with a

setback output (leader). Whenever the Eco mode is

active, a voltage is present at this output.The setback

output can be connected to the setback input (follower)

of a ClimaCon F90, F100 room thermostat. The voltage at

the setback input reduces the temperature at the follower

room thermostat by 4 Kelvin compared to the temperature

set at the scale (position

in Fig. 4 on page 9).

3.3.1.3 Manual mode

You always have the option to set the temperature

manually (see par. 8.2.3 on page 21).

3.3.2 Functions in detail

3.3.2.1 ClimaCon F90 - Only heating / only cooling

• Rotary wheel for adjusting the setpoint temperature

• Frost protection can be activated via rotary wheel

• Follower input for connection to a leader room

thermostat

3.3.2.2 ClimaCon F100 - Heating or Cooling

• Rotary wheel for adjusting the setpoint temperature

• Frost protection can be activated via rotary wheel

• Follower input for connection to a leader room

thermostat

• Selection between on/off and PWM via DIP switch

• Switching between heating and cooling via change-

over signal

3.3.2.3 ClimaCon F210 - Only heating / only cooling

• Dot-Matrix display for visualisation of the setpoint

temperature, the actual temperature, various error

codes, the display “BLu” for the teach-in mode, as well

as the OFF display when the device is switched off

• LED display heating or cooling

• LED display with touch surfaces for adjusting the

setpoint temperature via the Plus and Minus keys and

for switching between Auto and Eco mode

• Control via app (Bluetooth)

• Possible modes: Auto (daily or weekly schedule), Eco/

Setback, Manual

• Frost protection (6°C/ 43°F) is activated when the

room thermostat is switched off

• Temperature limitation and offset temperature

adjustable

• Leader output for controlling the setback temperature

of a follower room thermostat

8115500984-V07.11.2022

ClimaCon F

Technical description

3.3.2.4 ClimaCon F310 - Heating or cooling

• Dot-Matrix display for visualisation of the setpoint

temperature, the actual temperature, various error

codes, the display “BLu” for the teach-in mode, as well

as the OFF display when the device is switched off

• LED display heating or cooling

• LED display with touch surfaces for adjusting the

setpoint temperature via the Plus and Minus keys and

for switching between Auto and Eco mode

• Switching between heating and cooling via change-

over signal

• Control via app (Bluetooth)

• Possible modes: Auto (daily or weekly schedule), Eco/

Setback, Manual

• Frost protection (6°C/ 43°F) is activated when the

room thermostat is switched off

• Temperature limitation and offset temperature

adjustable

• Leader output for controlling the setback temperature

of a follower room thermostat

Only ClimaCon F310 (24V)

• 0-10 V output for controlling e.g. Air Handling Units

(AHU)

• An external NTC temperature sensor (10K) can be

connected for measuring the actual temperature

3.4 Operating elements and displays

3.4.1 ClimaCon F90, F100

1 2

Fig. 4: Operating elements F90, F100

1Rotary wheel

2Scale

ClimaCon F100 Switching on/off / PWM

Fig. 5: F100 Switching on/off / PWM

1Switch position left = on/off

Switch position right = PWM

3.4.2 ClimaCon F210, F310

Fig. 6: Operating elements F210, F310

1“ON/OFF” key

2Display cooling

3“-” sign, decrease of the desired temperature

4Temperature display

5Display heating

6“+” sign, increase of the desired temperature

7“Eco mode” key

8“Auto mode” key

9115500984-V07.11.2022

ClimaCon F

Technical description

3.5 Technical data

3.5.1 General

Parameter Value

Mode of operation Type .Y

Contamination degree 

Software class A

Rated surge voltage V

Temperature for the ball

pressure test

°C

3.5.2 F90, F100

3.5.2.1 ClimaCon F90 (230V)

Parameter Value

Temperature adjustment

range

°C to °C, frost pro-

tection

Protection category IP

Switching current (short-

time)

 A

Switching capacity Max. .W (xAktor TP)

Inputs • Setback input - K

(follower),

not potential-free

The setback func-

tion is only useful

in pure heating

mode!

Outputs On/off

Accuracy at +°C +/- K

Required actuator Heating

Electrothermal actuator

“normally closed”

Cooling

Electrothermal actuator

“normally open”

Fuse SMD (not exchangeable)

Colour White

Operating voltage V AC / -Hz

Protection class II

Dimensions (WxHxD) mm xx

3.5.2.2 ClimaCon F100 (230V)

Parameter Value

Temperature adjustment

range

°C to °C, frost pro-

tection

Protection category IP

Switching current (short-

time)

A

Switching capacity Max. .W (xAktor TP)

Inputs • Setback input - K (fol-

lower),

not potential-free

The setback func-

tion is only useful

in pure heating

mode!

• Change-Over,

not potential-free

Outputs On/off / PWM

Accuracy at +°C +/- K

Required actuator Electrothermal actuator

“normally closed”

Fuse SMD (not exchangeable)

Colour White

Operating voltage V AC / -Hz

Protection class II

Dimensions (WxHxD) mm xx

3.5.2.3 ClimaCon F100 (24V)

Parameter Value

Temperature adjustment

range

°C to °C, frost pro-

tection

Protection category IP

Switching current (short-

time)

A

Switching capacity Max. .W (xAktor TP)

Inputs • Setback input - K (fol-

lower),

not potential-free

The setback func-

tion is only useful

in pure heating

mode!

• Change-Over,

not potential-free

Outputs On/off / PWM

Accuracy at +°C +/- K

10 115500984-V07.11.2022

Inhaltsverzeichnis

Andere oventrop Steuerungssystem Handbücher

oventrop

oventrop Regumat F-130 Bedienungsanleitung

Beliebte Steuerungssystem Handbücher anderer Marken

Pentair Pool Products

Pentair Pool Products Compool Bedienungsanleitung

ComfortNET

ComfortNET CTK04 Bedienungsanleitung

Fireye

Fireye InSight II 95DSS3 Bedienungsanleitung

CAME

CAME G3000 Bedienungsanleitung

Idemia

Idemia MorphoAccess VP MD Bedienungsanleitung

Axis

Axis P1445-LE-3 Bedienungsanleitung

HEIDENHAIN

HEIDENHAIN TNC 150 B Bedienungsanleitung

CNC-Step

CNC-Step High-Z T-Series Bedienungsanleitung

Doosan

Doosan DVF Series Bedienungsanleitung

Honeywell

Honeywell KAP 140 Bedienungsanleitung

Honeywell

Honeywell vk41 series Bedienungsanleitung

AirBench

AirBench FPW Installationsanleitung

Cypress

Cypress HHR-3160 Bedienungsanleitung

CAME

CAME GLT40AOS Bedienungsanleitung

Zonex

Zonex GEN II -VVT Benutzerhandbuch

Altronics

Altronics K 9650 Bedienungsanleitung

micro-trak

micro-trak RoadMaster Bedienungsanleitung

micro-trak

micro-trak Calc-An-Acre II Bedienungsanleitung

oventrop ClimaCon F Bedienungsanleitung

Beliebte Steuerungssystem Handbücher anderer Marken