Manual Version: v1.0
Model Code: 3661
Oypla.com LLP / www.oypla.com
Parts List:
-If you are missing any of the below parts, please contact
-Please be aware that you will be referring to this parts list throughout the
assembly process.
PARTS LIST CONTINUES ON FOLLOWING PAGE
1Front Cover
-
2Safety
Instructions
-
2Warning
-
2Assembly
Instructions
-
4Back Cover
End
Safety Instructions
Notice: Ensure you read and fully understand instructions before use
While every attempt is made to ensure the highest degree of protection in all equipment, we cannot
guarantee freedom from injury. The user assumes all risk of injury due to use. All merchandise is sold
on this condition, which no representative of the company can waive or change.
•This product is not a toy, and should only
be used for its designated purpose.
•Make sure that the racking platforms are
secure before applying any weight to
them.
•Only use this product on stable, level and
dry ground.
•Leaving this product outside exposed to
weather, especially direct sun, rain and
salt air, will speed the weathering
process. This can be slowed by removing
the product from these conditions, or
covering it with a suitable cover.
•Do not carry out alterations or
modifications to this product.
•Do not discard any of the packaging until
you have checked that you have all of
the parts and fittings required.
•When adjusting the height of the
shelves, be sure that the shelving is
securely held in place after adjusting the
height, to avoid it falling due to weight
application.
•Clean only with a damp cloth. Do not use
any strong industrial cleaning substances
or abrasive materials, as these may
damage the product.
•If the product is damaged or defective,
⚠Do not overload the shelves! The maximum capacity for each shelf is
150kg, and the overall weight capacity is 750kg.
