Ozito OZCWP12A Bedienungsanleitung

CORDLESS WATER PUMP

12V MODEL NO. OZCWP12A

OPERATING INSTRUCTIONS

For our full range visit www.ozito.com.au

SPECIFICATIONS - MODEL NO. OZCWP12A

Battery power: 12 – 1.2Ah

Charger: 230-240V ~ 50 Hz

Charging time: 3 - 5 hours

Diameter of outlet hose: 15mm

Outlet hose: 1.5m

Pump flow rate: 10 litres p/m

Nominal Battery Runtime: 45min

Features: Cordless Convenience

Fully Submersible

Waterproof

1. Outlet hose

2. Cover

3. On/off switch

INTRODUCTION

GENERAL

Warning! A battery operated pump with integral batteries or a separate

battery pack must be recharged only with the specific charger for the battery.

A charger that may be suitable for one type of battery may create a risk of fire

when used with another battery.

• Avoid accidental starting. Make sure the pump is not turned on. Carrying a pump

with your finger on the switch or inserting the battery pack into a pump with the

switch on invites accidents.

• Disconnect the battery pack from the pump and ensure that the pump is off

before making any adjustments, changing accessories, or storing the pump.

Such preventative safety measures reduce the risk of starting the pump

accidentally.

•When the battery pack is not in use, keep it away from other metal objects.

Read the whole manual carefully and make sure you know how to switch the pump

OFF, in an emergency, before operating the pump. Save these instructions and other

documents supplied with this machine for future reference.

1. Keep work areas clean. Cluttered areas and benches can cause accidents.

2. Consider work area environment. Make sure the Charger is in a dry safe area.

Check the cord is located so that it will not be stepped on, tripped over, or

subjected to damage or stress. Do not store or use the pump and battery pack

in locations that exceed 40°Celsius (Such as outside sheds in summer). The

charger is designed to operate on standard household electrical power.

3. Keep children away. Do not allow children, visitors or animals to come near

the work area or to touch the pump or charger.

4. Dress appropriately. When using the pump in conditions involving water, do

not wear important clothing or jewellery that could be damaged in this

environment. Wear protective hair covering to keep long hair out of the way.

Congratulations on purchasing a 12V Cordless Water

Pump. We aim to provide quality products at an

affordable price. We hope you will enjoy using this tool

for many years.

Your submersible 12V Cordless Water Pump OZCWP12A

has been designed to empty washing troughs, fish tanks,

bath water & the like to your desired location.

SAFETY INSTRUCTIONS

GENERAL (cont.)

5. Guard against electric shock. Prevent body contact with earthed or grounded

surfaces (e.g. pipes, radiators, cookers and refrigerators). Electric safety can be

further improved by using a high sensitivity (30 mA/30 mS) residual current

device (RCD).

6. Do not overreach. Keep proper footing and balance at all times.

7. Stay alert. Watch what you are doing. Use common sense. Do not operate the

tool when you are tired.

8. Secure work piece. If using water pump around e.g Fish tank ensure that it is

stable and safe to work around if you are leaning on or into it. It is safer as it

frees both hands to operate the tool.

9. Extension tubes/hoses. Before use inspect the extension hose and tubes and

replace if damaged. When using indoors or outdoors, do not use pump near

any electrical appliances or areas.

10. Use appropriate tool. The intended use is described in this instruction

manual. Do not force this cordless pump to do the job of a heavy duty tool.

The tool will do the job better and safer at the rate for which it was intended.

Do not force the tool.

Warning! The use of any accessory or attachment, or performance of any

operation with this tool other than those recommended in this instruction

manual may present a risk of personal injury.

11. Check for damaged parts. Before use carefully check the Pump, charger and

power lead for damage. Check for misalignment and seizure of moving parts,

breakage of parts, damage to guards and switches and any other conditions

that may affect its operation. Ensure that the tool will operate properly and

perform its intended function. Do not use the tool if any parts are damaged or

defective. Do not use the tool if the switch does not turn it on and off. Never

attempt any repairs yourself.

12. Unplug the charger. Unplug the charger when it is not in use, before changing

any parts of the tool, accessories or attachments and before servicing.

13. Avoid unintentional starting. Do not carry the tool with a finger on the on/off

switch. Make sure the tool is switched off when plugged in.

14. Store idle tools. When not in use, tools should be stored in a dry, locked up or

high place, out of reach of children.

15. Maintain tools with care. Keep the water pumps hose and slots at the

base clean after each use. Check for fragments of rubbish for better and

safer performance.

16. Users. This appliance is not intended for use by young children or infirmed

persons without supervision. Young children should be supervised to ensure

that they do not play with this appliance.

CHARGER & BATTERY PACK SAFETY INSTRUCTIONS

THIS MANUAL CONTAINS IMPORTANT SAFETY AND OPERATING

INSTRUCTIONS FOR YOUR BATTERY CHARGER.

• Before using the charger, read all instructions and cautionary markings on

charger, battery pack and product using the battery pack.

Danger! If the battery pack casing is cracked or damaged, do not insert into

charger. There is a danger of electric shock.

Warning! Don't allow any liquid to get inside charger. Electric shock may result. To

facilitate cooling of the battery pack after use, avoid placing the charger or battery

pack in a warm environment such as in a metal shed, or a warm environment.

• This charger is not intended for any uses other than charging rechargeable

batteries. Any other use may result in risk of fire, electric shock or electrocution.

• Do not place any object on top of the charger or place the charger on a soft

surface that may result in excessive internal heat. Place the charger in a position

away from any heat source.

• To reduce the potential risk of damage to the electric plug and cord, pull by the

plug rather than the cord when disconnecting the charger from the power supply.

• Make sure the cord is located so it will not be stepped on, tripped over, or

otherwise subjected to damage or stress.

• An extension cord should not be used unless absolutely necessary.

Use of an improper extension cord could result in the risk of fire, electric

shock or electrocution.

• Do not operate the charger if it has received a sharp blow, been dropped or

otherwise damaged in any way.

• Do not disassemble charger.

• To prevent the risk of electric shock, unplug the charger from the outlet before

attempting any cleaning. Removing the battery pack will not reduce this risk.

• Never attempt to connect two chargers together.

•DO NOT store or use the tool and battery pack in locations where the

temperature may reach or exceed 40ºC (such as outside sheds or metal

buildings in summer).

•The charger is designed to operate on standard household electrical power

(230 to 240 volts). Do not attempt to use it on any other voltage!

CHARGING YOUR BATTERIES

• Plug the charger in an appropriate AC power outlet and switch on at the mains.

• Insert the battery into the charger ensuring the battery is fully seated.

The battery fits one way only.

• The red light will engage.

• The battery will take 3-5 hours to charge.

NOTE: If light on the charger fails to come on.

• Check the charger is securely plugged into the wall outlet and is switched on.

• Check battery is firmly seated into the charger.

Important Charging Notes

• The charger and battery pack may become warm to touch while charging. This is a

normal condition, and does not indicate a problem.

• Use the charger at normal room temperatures whenever possible. To prevent

overheating, do not cover the charger and do not charge the battery pack in direct

sunlight or near heat sources.

• If the battery pack does not charge properly:-

1. Check current at receptacle by plugging in a lamp or other appliance.

2. Check to see if receptacle is connected to a light switch which turns power off

when you turn out the light.

3. If charging problems persist, take the tool, battery pack and charger to the

place of purchase with your receipt.

Battery

The length of service from each charging will depend on the type of work you are

doing. The battery in this tool have been designed to provide maximum trouble free

life. However, like all batteries, they will eventually wear out.

To obtain the longest possible battery life, we suggest the following:

• Store and charge your battery in a cool area. Temperatures above or below normal

room temperature will shorten battery life.

• All batteries gradually lose their charge. The higher the temperature the quicker

they lose their charge. If you store your tool for long periods of time without using

it recharge the battery every month or two. This practice will prolong battery life.

• Try not to run the battery completely dead. Once the pump has ceased to

operate normally, recharge the battery as per instructions at the top of this page.

TOOL OPERATION

Always switch off the tool before insertion or removal of the battery pack.

To Install the Battery Pack

• Place the battery pack into the top

of the water pump; ensure the

battery pack release buttons on

either side of the battery is secured.

Replace the lid prior to using the

water pump. (see Fig.1)

• Do not use force when inserting the

battery pack. If the battery pack

does not slide in easily; it is not

being inserted correctly.

To Remove the Battery Pack

• Remove lid (anti-clockwise) place

thumb and index finger on the tabs on either side of battery, squeeze the tabs

inwards and lift the battery straight up.

The battery has been shipped in a low charge condition to prevent possible

problems, therefore you should charge them prior to use.

• Place pump into water at the

deepest point possible.

• To start pump, push switch located

directly below cover.

•Make sure the pump is located in an

area free of debris to avoid clogging.

• With bottom filter plate attached,

pump will sink, to the bottom of

the surface.

• Hold pump in position until the

water begins flowing out of the hose.

(Ensure battery is fully charged.)

• Check frequently to be sure pump is

free from debris and that the water is flowing properly from the hose and is

directed to the precise area.

• If water is flowing slowly, check hose for kinks or debris, If necessary to remove

debris, turn pump off, simply remove pump from water and turn it upside

down looking for noticeable obstructions.

Fig. 2

On/Off Switch

Bottom Filter

Plate

Fig. 1

WARNING: This product is intended for pumping water only.Do not use to pump

Petrol / diesel fuel or chemicals of any kind. Fluids other than water will damage

product and/or create a fire hazard.

This portable pump is not intended for permanent installation in a bilge or sump

area. It should not be used in situations where risk to personal injury or property

damage could result from pump or battery failure.

• Store machine in a dry place.

NOTE: Ozito Industries will not be responsible for any damage or injuries caused by

repairing of the tool by an unauthorised person or mishandling of the tool.

MAINTENANCE AND CARE

AUSTRALIA (Head Office)

5 Chestnut Crt, Dingley, Victoria, Australia, 3172

Telephone: 03 9558 3999

Facsimile: 03 9558 0583

www.ozito.com.au

1 x Cordless pump OZCWP12A

1 x Charging Stand & Adaptor

1 x 12V 1.2Ah Battery

1 x 1.5m Outlet hose with 2 connectors

1 x Instruction Manual

CONTENTS

OZITO INDUSTRIES PTY LTD

WARRANTY

THIS WARRANTY FORM AND CONFIRMED BUNNINGS REGISTER RECEIPT SHOULD BE

RETAINED BY THE CUSTOMER AT ALL TIMES

The warranty is only made available by returning the product to your nearest Bunnings

Building Supplies with a confirmed Bunnings register receipt

PURCHASED FROM:__________________________________________________

DATE PURCHASED: __________________________________________________

1 YEAR REPLACEMENT WARRANTY

Your Ozito tool is guaranteed for a period of 12 months from the original date of

purchase and is intended for DIY (Do it yourself) use only.

WARNING

The following actions will result in the warranty being void.

• Professional, Industrial or high frequency use.

•If the tool has been operated on a supply voltage other than that specified on the tool.

• If the tool shows signs of damage or defects caused by or resulting from abuse,

accidents or alterations.

•If the tool is disassembled or tampered with in any way.

Note: Warranty excludes consumable parts such as batteries, hose connectors,

outlet hoses.

YOUR WARRANTY FORM SHOULD BE RETAINED

BY YOU AT ALL TIMES.

SHOULD YOU HAVE ANY QUESTIONS PRIOR TO

RETURNING YOUR PRODUCT FOR WARRANTY

PLEASE TELEPHONE OUR CUSTOMER

SERVICE HELPLINE:

Australia 1800 069 486

New Zealand 0508 069 486

TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL NUMBER

AND DATE OF PURCHASE AVAILABLE. AN OZITO CUSTOMER SERVICE

REPRESENTATIVE WILL TAKE YOUR CALL AND ANSWER ANY QUESTIONS

YOU MAY HAVE RELATING TO THE WARRANTY POLICY OR PROCEDURE.

Inhaltsverzeichnis

Andere Ozito Wasserpumpe Handbücher

Ozito

Ozito PFFP-65E Bedienungsanleitung

Ozito

Ozito PXGTPS-0182 Bedienungsanleitung

Ozito

Ozito PSDWK-1000 Bedienungsanleitung

Ozito

Ozito PSCP-1100 Bedienungsanleitung

Ozito

Ozito PSDW-350 Bedienungsanleitung

Ozito

Ozito PSDWK-780 Bedienungsanleitung

Ozito

Ozito PSDW-1000 Bedienungsanleitung

Ozito

Ozito CPPAS-800 Bedienungsanleitung

Ozito

Ozito PSDWV-500 Bedienungsanleitung

Ozito

Ozito CPP-370 Bedienungsanleitung

Ozito

Ozito IDP-2000U Montageanleitung

Ozito

Ozito PSDW-780 Bedienungsanleitung

Ozito

Ozito PSCD-750 Bedienungsanleitung

Ozito

Ozito PSCW-400RB Bedienungsanleitung

Ozito

Ozito TRP-650 Bedienungsanleitung

Ozito

Ozito PTP-165 Bedienungsanleitung

Ozito

Ozito APR-012 Bedienungsanleitung

Ozito

Ozito PPW-801 Bedienungsanleitung

Ozito

Ozito IDP-2000U Bedienungsanleitung

Ozito

Ozito IDP-2000 Bedienungsanleitung

Ozito

Ozito TRP-650 Bedienungsanleitung

Ozito

Ozito CPPW-805 Bedienungsanleitung

Ozito

Ozito HVAP-12V Bedienungsanleitung

Ozito

Ozito DTP-065 Bedienungsanleitung

Beliebte Wasserpumpe Handbücher anderer Marken

Neptun

Neptun NPHW 5500 Bedienungsanleitung

Sensidyne

Sensidyne Gilian BDX-II Montage- und Bedienungsanleitung

Draper

Draper 47808 Bedienungsanleitung

Trolla

Trolla 12820 Bedienungsanleitung

Sunfab

Sunfab SVH Series Bedienungsanleitung

WilTec

WilTec 50740 Bedienungsanleitung

Fieldmann

Fieldmann FVC 5015 EK Bedienungsanleitung

Everbilt

Everbilt EFSUB5-122HD Bedienungsanleitung

Graco

Graco Husky 3300e Bedienungsanleitung

esotec

esotec 101018 Bedienungsanleitung

moyno

moyno 2000 CC Bedienungsanleitung

Becker

Becker BASIC VASF 2.80/1-0.AC230 Bedienungsanleitung

Sykes AmeriPumps

Sykes AmeriPumps GP100M Fehlerbehebungshandbuch

DUROMAX

DUROMAX XP WX Series Bedienungsanleitung

BRINKMANN PUMPS

BRINKMANN PUMPS SBF550 Bedienungsanleitung

Franklin Electric

Franklin Electric IPS Bedienungsanleitung

Xylem

Xylem e-1532 Series Bedienungsanleitung

Milton Roy

Milton Roy PRIMEROYAL Bedienungsanleitung