Pacific Star SSABR-B Bedienungsanleitung

Heritage Series ADSL Bridge/ Router

ADSL Ethernet Router

Quick Installation Guide

SSABR-B/SSABR-BU

form or by any means without written permission from the product

manufacturer.

Changes are periodically made to the information in this document. They

will be incorporated in subsequent editions. The product manufacturer

may make improvements and/or changes in the product described in this

document at any time.

Heritage Series ADSL Bridge/ Router Quick Guide 1

Getting Started

This quick guide provides a quick and easy way to install and configure the

SSABR-B/SSABR-BU ADSL modem/router to match what you need.

The major functions of the SSABR-B/SSABR-BU ADSL modem/router are

performed via Ethernet 10/100Base-T network interface. Your computer has to

installed an Ethernet NIC card and set up the TCP/IP protocol before start to

using your ADSL Ethernet Router.

Factory Default Settings

LAN IP address: 192.168. 7.1

Subnet mask: 255.255.255.0

VPI: 0

VCI: 35

Encapsulation type: RFC 1483 Bridged IP LLC

IMPORTANT:

Please DO NOT change default values if you are unfamiliar with these

settings, try using the device without modification, or contact your DSL

service provider for assistance. We strongly recommend that you

contact your DSL service provider prior to change the default

configuration.

Quick Guide

LED Indicators

You can monitor the LEDs during operation. Following table shows the Router

status LEDs and identifies what each LED light means.

Function Behavior Definition

Dark Power offPOWER

Light Power on

Dark Power off

Flashing System training in progress

LINK

(DSL)

Light Ethernet Link is OK

Dark Local network link absent or power off

Flashing Wireline

ACT

(DSL)

Light Local network link established

Dark No data activity or power off

Flashing Data activity occurs

LINK

(LAN)

Light ADSL Link is up

10/100M

(LAN)

Light 100Base-T is running

If the LEDs illuminate as expected, test your Internet connection from a LAN

computer, Open your web browser, and type the URL of any external

website(such as http://www.yahoo.com). The LED labeled ACT(XDSL) should

be blinking rapidly and may appear solid as the device connected to the site.

Heritage Series ADSL Bridge/ Router Quick Guide 3

Hardware Installation

1. Connect the ADSL cable and optional telephone

2. Connect the Ethernet cable

3. Attach the power connector

4. Turn on the SSABR-B/SSABR-BU ADSL modem/router and power up your

system.

Stand-alone computer

AC adapter

Computer Computer Computer

ADSL Ethernet Router

Straight-through cable

to Hub for LAN PCs . 2

Wall outlet Wall jack

Straight-through

cable to a PC

RS-232C

cable 1

Quick Guide

1.1 Configure your Computer

1.1.1 Obtain an IP address from the ADSL modem/router

You do not need to specify an IP address when configuring TCP/IP properties. If

your computer stands alone and is set up to obtain an IP address automatically,

you can move on to section 1.2-Web Configuration.

1.1.2 Manually assign a fixed IP address to your computer

If you prefer to assign an IP address manually, use 192.168.7.x(x is any number

between 2and 254) and subnet mask 255.255.255.0. Specify the gateway as

192.168.7.1. Windows specific instructions follow:

For Windows 95/98/ME:

◆ From Control Panel, double click Network. Scroll down and highlight

TCP/IP (your network card.) Click Properties.

◆ Select the IP Address tab. Enter 192.168.7.x (x is any number between 2and

254). This is the IP address assigned to your computer. Subnet Mask is

255.255.255.0.

◆ Select the Gateway tab. Enter the Router’s IP address 192.168.7.1 and click

Add.

◆ Click OK & then OK to finish. You may be prompted for the Windows CD

and then be asked to restart. Answer Yes to restart the computer.

For Windows 2000/XP:

◆ From Control Panel double click Network Connections. Open local Area

Connections and click Properties. Double click Internet Protocol(TCP/IP).

Select Use the following IP address.

◆ Enter 192.168.7.x (x is any number between 2and 254). This is the IP address

assigned to your computer. Subnet Mask is 255.255.255.0

Heritage Series ADSL Bridge/ Router Quick Guide 5

◆ Enter the Router’s IP 192.168.7.1 as the Default gateway.

◆ Click OK to finish.

You have now finished configuring your computer.Restart your computer, if

necessary.

1. 2 Web-Configuration

Web-Configuration is designed to work best with Microsoft Internet Explorer®

version 5.0, Netscape Navigator® version 4.7, or later versions.

Open your web browser and fill in the following URL address in the web

address (or location) filed, and press <Enter> key.

URL address: http://192.168.7.1 .

You will now see the following screen :

1. For the User Name, type “DSL” (no “” and the word is case sensitive).

2. For the Password, type “DSL” (no “” and the work is case sensitive).

3. Click on the OK button.

Quick Guide

You will now see the following screen:

1. Click Quick Configuration at the top of the screen.

Heritage Series ADSL Bridge/ Router Quick Guide 7

You will now see the following screen:

Quick Guide

1.2.1 RFC 1483 Bridged Mode (MPoA)

1. Beside ATM Interface, you can setup up to 8(0~7) interface. The default

interface number is 0.

2. Beside Operation Mode, please choose Yes to enable this interface.

3. Beside Encapsulation, use the drop down menu and select 1483

Bridged IP LLC. If your encapsulation is VC multiplexing, choose 1483

Bridged VC-Mux

4. Beside VPI, enter in a value (please consult your ISP for your VPI.

Factory default is 0).

5. Beside VCI, enter in a value (please consult your ISP for your VCI.

Factory default is 35).

6. Beside Bridge, use the drop down menu and select Enabled.

7. Beside IGMP, use the drop down menu and select Disabled to accept

multicast.

8. Beside Use DHCP, place the black dot beside Disable.

9. Beside Default Route, use the drop down menu and select Disabled

10. DO NOT MAKE ANY OTHER CHANGES.

11. Click on the Submit button.

12. Click the Admin tab, and then click Commit&Reboot in the task bar.

13. Click to save changes to permanent storage.

14. Turn off SSABR-B/SSABR-BU, wait 5 seconds and then turn it

back on.

1.2.2 RFC 1483 Routed Mode (MPoA)

1. Beside ATM Interface, you can setup up to 8(0~7) interface. The default

interface number is 0.

2. Beside Operation Mode, please choose Yes to enable this interface.

3. Beside Encapsulation, use the drop down menu and select 1483 Routed

IP LLC. If your encapsulation is VC multiplexing, choose 1483 Routed

IP VC-Mux.

4. Beside VPI, enter in a value (please consult your ISP for your VPI.

Factory default is 0).

5. Beside VCI, enter in a value (please consult your ISP for your VCI.

Factory default is 35).

6. Beside Bridge, use the drop down menu and select Disabled.

7. Beside IGMP, use the drop down menu and select Disabled to accept

multicast.

Andere Handbücher für SSABR-B

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Pacific Star Netzwerk-Router Handbücher

Pacific Star

Pacific Star SSABR-B Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Korenix

Korenix JetNet 5710G Series Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise