Pager Genius T9050 Bedienungsanleitung

Pager Genius

Paging System

USER MANUAL

Pager P2000

T9050/P2000

Transmitter T9050

www.pagergenius.com

[email protected]

Pager Genius, INC.

9852 W Katella Ave, Suite #500, Anaheim, CA 92804

PagerGenius.com

1-800-289-3823

www.pagergenius.comUser manual 1

T9050/P2000

Thank you for purchasing

the Pager Genius System

We provide an excellent paging product and USA based customer service.

Please familiarize yourself and sta with the contents of this manual

tooperate and maintain your system correctly. If you have any questions

orservice problems, please contact us.

Please keep this manual in a safe place for the sta and managers to

view in the future.

1-800-289-3823

[email protected]

9852 W Katella Ave, Suite #500,

Anaheim, CA 92804

www.pagergenius.comUser manual 2

T9050/P2000

TABLE OF CONTENTS

SETTING UP PAGER GENIUS TRANSMITTER

TRANSMITTER KEYPAD OPERATION

MAKING YOUR TRANSMITTER SILENT WITH NO BEEPING

HOW TO PAGE

CANCELLING A PAGE

RESETTING A PAGER TO THE TRANSMITTER

GROUP PAGING

CHARGING THE PAGERS

SETTING THE PAGER ALERTS

SETTING THE TIME ON THE PAGER

SETTING THE ALERT TIME ON THE PAGERS

CLEANING THE PAGERS AND TRANSMITTERS

FAQS AND TROUBLESHOOTING ISSUES

WARRANTY

HOW TO SET-UP AND USE THE PAGER GENIUS SYSTEM

Your Pager Genius System is ready to use out of the retail box. Plug your

Pager Genius into a power outlet, it will take 60 minutes for them to charge

fully. The Pager Genius System is a self-contained paging system.

All that is required to use the Pager Genius System is power. The Pager

Genius System does not connect to the internet or any phone lines. Once the

pagers fully charge up, walk around the property and test the range of your

system. We oer Pager Genius range extenders to extend coverage to cover

large areas..

www.pagergenius.comUser manual 3

T9050/P2000

SETTING UP PAGER GENIUS

TRANSMITTER

Charging port

Antenna input

TRANSMITTER KEYPAD OPERATION

Number Keys

Press the number of the pager

you wish to notify

Call

To send the

numeric page

1 2 3 4

5 6 7 8

9 0 – +

Clear Call

Clear Button

To cancel a page, press the number of

the pager followed by the Clear button

Power Button

Settings Button

www.pagergenius.comUser manual 4

T9050/P2000

MAKING YOUR TRANSMITTER SILENT WITH NO BEEPING

The Pager Genius transmitter beeps every time you press an input. If you

would like to remove the beeping feature, do the following steps:

1. Unplug the transmitter and plug it back into power from the rear input.

2. Let the transmitter power up and wait for [- - - -] to come across the

digital screen of the transmitter.

3. Within ve seconds, press the settings button and the number 2 at the

same time.

4. If you see bep0 come across the digital screen, the transmitter is now

silent. If you see bep1 come across the screen, the transmitter will beep.

HOW TO PAGE

The Pager Genius Transmitter can page single pagers numbered 0 to 999.

To page a pager, press the number of the pager you wish to page, followed

by the call button. Example: To page pager #7, press the number 7 on the

keypad, followed by the call button.

Example: To page pager #7, Press the number 7 on the keypad, followed by

the call button.

CANCELLING A PAGE

There are two ways to cancel a page:

1. You can cancel a page by pressing the number of the pager you want

canceled, followed by the clear button on the transmitter.

2. You can place the pager back on it's charging stack and the page will

cancel automatically.

www.pagergenius.comUser manual 5

T9050/P2000

RESETTING A PAGER TO THE TRANSMITTER

When you order more pagers, you will need to add the pagers to the

transmitter. Below are the following steps to add a pager to your system:

Step 1: Turn the pager around, and press the Learn button, the middle

button on the rear of the pager. The digital display of the pager will read [----].

Step 2: Press the number you would like the pager to display, followed by the

enter button. The pager will start alerting, and the pager number will have

changed to the number entered.

The pager will always display this number unless the settings are changed

manually by the end-user.

1 2 3 4

5 6 7 8

9 0 – +

Clear Call

Step 1:

Press the Learn button

to reset the Pager

Step 2:

Use Number Keys to

input anumber for

the selected Pager

Step 3:

Press the Call button

to conrm and save

the number

www.pagergenius.comUser manual 6

T9050/P2000

GROUP PAGING

With your Pager Genius System, group paging is an option.

For example, you can group numbers together, you can have ten #1 pagers

and ten #2 pagers, when #1 is paged all ten #1 pagers go o all at the same

time. You can go from group paging back to individual paging in a matter

of minutes. All end users can make changes on the y, and have complete

control of how the pagers are numbered.

CHARGING THE PAGERS

The pagers sit on top of a charging base

part number CH-100. One charging base

can support up to 15 pagers.

Pager Genius provides a charging station

for every ten pagers ordered. There is

a charging light at the rear of the pager,

and when the pagers are charging

correctly, you can see the charging light

illuminate on the rear pager.

Encourage sta to always look

for the charging light illumination

when closing at night.

The pagers must always be charging even when they are out of

operation. It is vital for the long term use of the batteries.

Once the pagers fully charge, they take up very little electricity. Once fully

charged, the pagers can operate up to ve days without charging.

The pagers fully charge in just 60 minutes.

Charging Base

www.pagergenius.comUser manual 7

T9050/P2000

SETTING THE PAGER ALERTS

You can have the pager do one, two, or all three of the following alerts:

Vibrate, Light-Up, and Beep.

Also, the pager has a clock option, where the pager can display the time of

day on its digital display. Below are directions on how to change alerts for

individual pagers:

Step 1: Turn the pager around and press the Mode button.

Step 2: Press the Learn button several times until you nd the setting you are

looking for: F(Flash), B(Beep), S(Vibrate), C(Clock).

If the pager digital screen is displaying FB, the pager will only Flash and beep. If

the pager is displaying FBS, the pager will ash, beep, and vibrate.

After you choose your setting press the Stop button.

Step 1:

Press the Mode button

to set up the Pager

Step 2:

Press the Learn button

several times to nd the

setting you are looking for

Step 3:

The pager digital

screen will display

the setting

www.pagergenius.comUser manual 8

T9050/P2000

SETTING THE TIME ON THE PAGER

Pager Genius pagers keep military time, and is an

option if you would like your pagers to display time.

How to set-up the time display on a pager:

Step 1: Make sure the pager has the C(Clock) setting

option selected. .

Step 2: Press the Mode button several times until

you get the correct hour, and then press the Stop

button to move the time to the minutes area. You

use the Stop button to toggle between the hours

andminutes.

SETTING THE ALERT TIME ON THE PAGERS

You can have the pagers alerted 15, 30, 45, and 60

seconds. Usually, 15 seconds is a reasonable amount of

time to alert the person to the page.

If the person does not respond to the rst page, you can

keep paging that person repeatedly.

You can change the paging time by turning a pager over

and locating the time button. Press the time button and

select the time you would like the pager to go o when

paged. Set the time that is right for your environment.

CLEANING PAGER GENIUS EQUIPMENT

We recommend using isopropyl alcohol based cleaners to clean the pagers

and transmitter. This is the only approved cleaner that we recommend at this

time. It is recommended the paging system be wiped down once a week.

The pager digital

screen will display

C (Clock)

Time Button

www.pagergenius.comUser manual 9

T9050/P2000

FAQS AND TROUBLESHOOTING ISSUES

Q: Pagers do not vibrate, beep, or light-up anymore.

Make sure that the feature alert mode is set in the correct setting (See page 7).

Q: The range of the transmitter covers most of the building and parking lot,

but I need the signal to cover the entire area.

If you need to increase the range of your current paging system, Pager

Genius has the tools to do this. We sell a Pager Genius Range Extenders

(Model RE-100) on our website www.pagergenius.com.

Q: One of our pagers is dead.

Make sure there are no obstructions on the bottom two metal charging

docks on the pager's rear.

Q: One of the pager is displaying LOBT?

A: When a pager is displaying LOBT the battery level is low. Place the pager back

on the charging base, look for the charging indicator light, and wait for the ve

to ten minutes, and the pager number will reappear. Please refer to page 6.

Q: I have pagers displaying the same number?

You will need to re-set the pager to the transmitter to change the pager

number. Please refer to page number 5.

Q: One of my pagers stopped beeping or vibrating?

A: You will need to change the settings on that pager to bring back a feature.

Please refer to page number 7.

Make sure your charging bases are plugged into a suitable power

outlet. Next, make sure all your charging indicator lights are on to

make sure the pagers are charging correctly. Also, make sure that the

pager charging contacts are free and clear of debris.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Pager Genius Mikrofon Handbücher

Pager Genius

Pager Genius T9005 Bedienungsanleitung

Beliebte Mikrofon Handbücher anderer Marken

IK Multimedia

IK Multimedia iRig Stream MIC PRO Bedienungsanleitung

DAPAudio

DAPAudio RM-101 Bedienungsanleitung

AKG

AKG CHM 21 Bedienungsanleitung

Sennheiser

Sennheiser evolution wireless series EM 100 Bedienungsanleitung

Sony

Sony C-48 Bedienungsanleitung

GIGAMEDIA

GIGAMEDIA GGM PAMICUHFG Bedienungsanleitung

Shure

Shure WH30TQG Bedienungsanleitung

auna PRO

auna PRO MIC-900 Bedienungsanleitung

AKG

AKG D 3800 Bedienungsanleitung

Shure

Shure KSM141 Bedienungsanleitung

MAIIN SOUND

MAIIN SOUND IIN style Bedienungsanleitung

Earthworks

Earthworks TC25 Bedienungsanleitung

Sennheiser

Sennheiser evolution D1 Bedienungsanleitung

Alesis

Alesis MicLink Wireless Bedienungsanleitung

DSPPA

DSPPA D6234 Bedienungsanleitung

Monacor

Monacor IMG STAGELINE ECM-300B Bedienungsanleitung

Ansr Audio

Ansr Audio Scan16 Bedienungsanleitung

Shure

Shure MXA710 Series Bedienungsanleitung