Pakedge Device & Software RB-KIT Bedienungsanleitung

RB-KIT

Preconﬁgured Enterprise-Class Router

& Security Appliance

Installation Manual – Version 2.0

FCC Declaration of Conformity

Pakedge Device & Software, 1163 Triton Dr., Foster City, CA, 94404, declares under sole responsibility that

the RB-KIT complies with 47 CFR Parts 2 and 15 of the FCC Rules as a Class B digital device. This device

complies with Part 15 of FCC Rules. Operation of the device is subject to the following two conditions: (1)

This device may not cause harmful interference, and (2) this device must accept any interference that may

cause undesired operation.

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO

RAIN OR MOISTURE. THE UNIT MUST NOT BE EXPOSED TO DRIPPING OR SPLASHING

WATER. CAUTION: DO NOT OPEN THE UNIT. DO NOT PERFORM ANY SERVICING OTHER

THAN THAT CONTAINED IN THE INSTALLATION AND TROUBLESHOOTING INSTRUCTIONS.

REFER ALL SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION: THIS DEVICE

MUST BE INSTALLED AND USED IN STRICT ACCORDANCE WITH THE MANUFACTURER’S

INSTRUCTIONS AS DESCRIBED IN THE USER DOCUMENTATION THAT COMES WITH

THE PRODUCT. WARNING: POSTPONE INSTALLATION UNTIL THERE IS NO RISK OF

THUNDERSTORM OR LIGHTNING ACTIVITY IN THE AREA.

RB-KIT INSTALLATION MANUAL 1

RB-KIT INSTALLATION MANUAL

SAFETY PRECAUTIONS:

When using this device, always follow basic safety precautions, to reduce the risk of ﬁre, electric shock, and

injury to persons, including the following:

• Read all of the instructions (listed here and/or in the user manual) before you operate this equipment.

• Comply with all warning and caution statements in the instructions.

• Retain the instructions for future reference.

• Observe all warning and caution symbols that are afxed to this equipment.

• Comply with all instructions that accompany this equipment.

• Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to

determine that the product is in safe operating condition.

• Installation of this product must be in accordance with national wiring codes and conform to local regulations.

•Avoid using this product during an electrical storm. There may be a risk of electric shock from lightning. For

added protection for this product during a lightning storm, or when it is left unattended and unused for long

periods of time, unplug the power supply, and disconnect the CAT5e..This will prevent damage to the product

due to lightning and power surges.

• Give particular attention to all safety precautions.

• Operate this product only from the type of power source indicated on the product’s marking label. If you are not

sure what type of power is supplied to your home, consult your dealer or local power company.

• It is recommended that the customer install an AC surge protector in the AC outlet to which this device is

connected. This is to avoid damage to the equipment from lightning strikes and other electrical surges.

• Wipe the unit with a clean, dry cloth. Never use cleaning uid or similar chemicals. Do not spray cleaners

directly on the unit or use forced air to remove dust.

• Keep the device away from excessive heat and humidity and keep the device free from vibration and dust.

• Do not directly cover the device, or block the airow to the device with insulation or any other objects.

RB-KIT INSTALLATION MANUAL

**** Warning ****

No Factory Reset - The RB-KIT was designed to be a very robust and exceptionally reliable product. Because

of this, you will ﬁnd the RT-50S does not have a hardware or software reset button. The product can either be

remotely reset by Pakedge, if the router is connected to a working internet connection with remote access or at

Pakedge’s facility. We highly recommend using the product only as described in Pakedge’s “Installation User

Manual” and “Advanced Setup User Manual”.

If you have further questions, email [email protected] or call 1-650-385-8703 for support.

RB-KIT INSTALLATION MANUAL

Table of Contents

1 INTRODUCTION ............................................................................................................................... 5

1.1 Package Content ................................................................................................................6

1.2 Getting to Know the RT-50S ................................................................................................. 6

Description for front LED’s: ................................................................................................... 7

Description for Ports: .......................................................................................................... 8

2 NETWORK CONFIGURATION/SETUP OVERVIEW ..............................................................................10

2.1 Summary of Settings & IP Address Conﬁguration .................................................................10

2.2 Summary of Setup ..........................................................................................................11

2.2.1 Basic Setup ...................................................................................................................11

2.2.2 Advanced Features Setup ...............................................................................................11

3 HARDWARE INSTALLATION ..............................................................................................................13

3.1 Installing the Router and Switch ........................................................................................13

3.1.1 Securing RV-50S in RMB-FG Rack Mount Bracket ..............................................................14

4 BROADBAND SOFTWARE CONFIGURATION .................................................................................... 15

4.1 DHCP Conﬁguration ........................................................................................................15

4.2 Static IP ..........................................................................................................................16

4.3 PPPoE Conﬁguration .........................................................................................................23

5 SUBSCRIPTION SERVICES .................................................................................................................26

6 CHANGING DEFAULT PASSWORDS .................................................................................................28

APPENDIX A – TROUBLESHOOTING FAQ’S ..........................................................................................30

APPENDIX B – SPECIFICATIONS ...........................................................................................................32

APPENDIX C – TECHNICAL SUPPORT ................................................................................................... 34

APPENDIX D – LIMITED WARRANTY .....................................................................................................35

RB-KIT INSTALLATION MANUAL

1. INTRODUCTION

The RB-KIT is an integrated, all-in-one security router appliance that delivers enterprise-class multi-threat protection

and routing for your home. It offers a full suite of security services in one hardened router platform: antivirus /

antispyware / antimalware, intrusion prevention (IPS), web ltering, stateful rewall and trafc shaping, and

IPSec/SSL VPN.

The RB-KIT is precongured to allow custom installers to focus on quick, quality installations without enterprise

conﬁguration worries.

Also, the Pakedge Router included in the kit is congured for a Guest Network. VLAN 6 is only to be used for

the Guest Network because it is setup by policy to only have internet access- no other devices on the internal

network will be accessible. If a Guest Network is desired, connect a VLAN capable wireless access point

directly to the router conﬁgured to the 6th VLAN.

Note: If this is your ﬁrst time installing this product, please read this manual in its entirety. Even though this

product was designed to get you up and running quickly, you can perform unlimited customizations to meet

every installation.

A very Basic (Section 2.2.1) setup would be to conﬁgure the router for the type of internet service (such as

Dynamic, Static and PPPoE) and plug the appropriate cables into the different devices.

A more Advanced (Section 2.2.2) setup would be adding load balancing for two internet connections and a

setting up SSL VPN tunnel in addition to steps listed in the preceding paragraph.

RB-KIT INSTALLATION MANUAL

This Quick Start Guide only covers the Basic Setup. There is a separate Advanced Features User Manual

which covers the advanced features offered by Pakedge (for latest Advanced Manual, please visit http://

www.pakedge.com/userguides.php).

Any additional conﬁguration not listed in the Basic and Advanced manuals is NOT supported by Pakedge.

Support, if needed, can be obtained from Fortinet.

1.1 PACKAGE CONTENT

Open the package carefully, and make sure that none of the items listed below are missing.

• RT-50S - Audio-Video Bridging Router

• RMB-FG - Rackmount Bracket

• Power supply AC/DC (for RT-50S)

• Power Cable (US, EUR, UK, AUS/NZ, IT or IN/SA)

• Console Serial Cable (used for advanced features)

• CAT5E Cable

• Installation Manual - (Basic Only, Advanced Features Manual is Downloadable on

www.pakedge.com/userguides.php )

• Hardware Accessories

RB-KIT INSTALLATION MANUAL

1.2 GETTING TO KNOW THE RT-50S

The front panel consists of LED indicators.

Description for front LED’s:

The router is powered on.

The router is turned off.

On during start-up or reboot.

Normal Operation.

The correct cable is in use and the

connected equipment has power.

Network activity at this interface.

No link established.

The interface is connected at 100 Mbps.

Green

Off

Green

Off

Green

Flashing Green

Off

Green

Power

Status

Link / Activity

10/100

OPERATIONSTATUSLED

RB-KIT INSTALLATION MANUAL

1.2 GETTING TO KNOW THE RT-50S

The rear panel of the switch is laid out as follows:

Description for Ports:

Internal

WAN1 and

WAN 2

CONSOLE

USB

RJ-45

USB

10/100 Base-T

9600 bps

Ethernet

RS-232-C

USB

3-port switch connection to up to three

devices or the internet network.

Redundant connections to the Internet.

Optional connection to the

management computet. Provides access

to the command line interface (CLI).

Optional connection for FortiUSB key

for ﬁrmware backup and installation.

PROTOCOL DESCRIPTIONTYPE SPEEDCONNECTOR

RB-KIT INSTALLATION MANUAL

1.2 GETTING TO KNOW THE RT-50S

Restore to Factory Defaults

Due to the nature of an enterprise gateway/security appliance, a standard reset to factory default button

does not exist. Since the RT-50S is precongured, chances are a factory reset will not be required. However

if for some reason this reset is needed, please contact Pakedge support for assistance.

Power Plug

To be compatible with electric service standards around the world, the switch is designed with a power

supply in the range from 100 to 240VAC, 50/60Hz. Please make sure that your outlet standard is within

this range. To power the switch, plug the female end of the power cord ﬁrmly into the receptacle of the

switch and the other end into a power outlet. After the power cord is plugged in, the power LED should be a

solid green to indicate normal power status.

Andere Handbücher für RB-KIT

Inhaltsverzeichnis

Andere Pakedge Device & Software Netzwerk-Router Handbücher

Pakedge Device & Software

Pakedge Device & Software K60D Bedienungsanleitung

Pakedge Device & Software

Pakedge Device & Software X-Series Bedienungsanleitung

Pakedge Device & Software

Pakedge Device & Software RB-KIT Bedienungsanleitung

Pakedge Device & Software

Pakedge Device & Software RK-1 Bedienungsanleitung

Pakedge Device & Software

Pakedge Device & Software RK-1 Bedienungsanleitung

Pakedge Device & Software

Pakedge Device & Software K60D Bedienungsanleitung

Pakedge Device & Software

Pakedge Device & Software RE-1 Bedienungsanleitung

Pakedge Device & Software

Pakedge Device & Software K60D Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Korenix

Korenix JetNet 5710G Series Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise