Pakedge WX-1-O Bedienungsanleitung

QUICK START GUIDE

WX-1-O Access Point

802.11ac dual band

Version 1.0

2 3

Package Contents 3

WX-1-O Mounting Options 4

Powering Up the Access Point 6

Conguring the Access Point 8

Step 1: Login 8

Step 2: Radio 14

Step 3: Security Proles 18

Step 4: Conguration 20

Contents

Please refer to the installation manual of your product.

WX-1-O

• 802.11ac Dual Band Access Point

•3x3 external outdoor antennas

• Powered by PoE+

System Requirements

Windows or Mac PC with an Ethernet interface.

WX-1-O Default Settings

Operation Mode: Access Point

IP Address: 192.168.1.250

Username/Password: pakedge/pakedgea

SSID: Pakedge2.4-1 and Pakedge5-1

Power Output: High

Security: Disabled

Package Contents

4 5

WX-1-O Mounting Options

Pipe Mounting Figure Wall Mounting Figure

NOTE: Please refer to the user manual for more detailed information regarding the installation and

conguration of the access point.

6 7

The access point can be powered via PoE+. Please see below for examples:

Power Using a PoE+ Injector

Powering Up the Access Point

WX-1-O

Smartphone

Panel

Laptop

Tablet

Switch

PoE+

Injector

Ethernet Cable

WX-1-O

Smartphone

Panel

Laptop

Tablet

Switch

Ethernet Cable

Power using a PoE+ Switch

The Wireless Access Point should now be up and running under its default settings. It does not

need to be congured to be functional. To make changes to the SSID and security settings, you

need to access the WX-1-O using a web browser.

8 9

Step 1: Login

There are multiple ways to log in to the WX-1-O. Please see 2 options below:

Option 1: Using Ethernet cable

Connect a computer to the WX-1-O through an Ethernet cable. Enter 192.168.1.250 into the

address bar of your web browser. You should see a login page. In the username box, type pakedge.

In the password box, type pakedgea and click Login.

NOTE: If your computer is not set to the default IP scheme of the WX-1-O (192.168.1.X), you must

rst congure the TCP/IP settings on your computer to log in to the WX-1-O through a web

browser.

Conguring the Access Point Using Windows 7

Under Control Panel – Network and

Internet, click on View Network Status

and Tasks.

On the left panel, click on Change

Adapter Settings and right-click Local

Area Connection. Select Properties.

Select Internet Protocol Version 4

(TCP/IPv4) and click Properties.

Select Use The Following IP Address

and enter the following information:

IP Address: 192.168.1.10

Subnet Mask: 255.255.255.0

Additional settings can be left blank.

Click “OK” and “Close”

Following page will display when logged in:

10 11

Second Option

You can also use the Where’s My WAP (WMW) software to change your IP addresses. You can

download Where’s My WAP for free from the Dealer Portal section of the Pakedge website.

12 13

This application will automatically scan the network for any Pakedge access point. Once the appli-

cation nds the access points, you will have the option to change their IP addresses by clicking on

the pencil icon.

NOTE: If you plan on using multiple access points at your home, remember that they all come with

the same IP address by default.

Once you are logged in to the AP, hover over Network and click on LAN.

14 15

The rst tab under Wireless is Radio. By default, the WX-1-O operates in Access Point Mode. The

mode can be set for either the 2.4 or the 5 GHz band. The available modes for the WX-1-O are:

Access Point, WDS Root Access Point, WDS Repeater and WDS Bridge.

Step 2: Radio

NOTE: That once you apply a country code, you cannot change it unless you reset the WX-1-O to

factory default.

WX-1-O

In Access Point Mode, the WX-1-O broadcasts both 2.4 GHz and 5 GHz signals to stations that

support 802.11 ac.

Access Point Mode

Smartphone

Panel

Laptop

Tablet

Ethernet Cable

Description of Operating Modes

16 17

In WDS Bridge Mode, you can connect the WX-1-O to a client by its Ethernet port. The WX-1-O

will receive the wireless signal from an access point and send the signal, through its Ethernet

port, to the client. A separate WX-1-O must be in WDS Root Access Point mode for this setting to

operate.

WDS Bridge Mode

WX-1-O

Laptop

Ethernet Cable

WDS Repeater Mode can be used to connect two WX-1-O access points wirelessly and extend

your wireless network coverage. A separate WX-1-O must be in WDS Root Access Point mode for

this setting to operate.

WDS Repeater Mode

Refer to the user manual for information on the other operating modes.

WX-1-O

Laptop

Ethernet Cable

18 19

The next tab over is the Security Settings. You can change the SSID and security settings for 2.4

GHz and 5 GHz.

Step 3: Security Proles

This security is known to be the most secure and is compatible with all the latest devices.

Note: The device/client you are working with factors into its security types. For example, older

laptops or phones do not support WPA2 security. Also, some devices only accept a certain security

type. You may want to reference your device specications.

The most secure and common mode is WPA2-PSK.

This setting is known to be the most secure and is compatible with all the latest devices.

NOTE: When choosing the security settings, consider your client devices. Older laptops or phones

do not support WPA2 security. Also, some devices are only compatible with certain security types.

You may want to reference your device specications.

Andere Handbücher für WX-1-O

Inhaltsverzeichnis

Andere Pakedge Drahtloser Zugangspunkt Handbücher

Pakedge

Pakedge WK Series Bedienungsanleitung

Pakedge

Pakedge WA Series Kurzanleitung

Pakedge

Pakedge WK-2-C Bedienungsanleitung

Pakedge

Pakedge WX-1 Bedienungsanleitung

Pakedge

Pakedge NK-1 Bedienungsanleitung

Pakedge

Pakedge WK-1-O Bedienungsanleitung

Pakedge

Pakedge WA-2200-C-1 Bedienungsanleitung

Pakedge

Pakedge WA-2200-C Bedienungsanleitung

Pakedge

Pakedge WA-2200-1 Bedienungsanleitung

Pakedge

Pakedge WAP-C3N Bedienungsanleitung

Pakedge

Pakedge WX-1 Bedienungsanleitung

Pakedge

Pakedge WA-2200 Series Bedienungsanleitung

Pakedge

Pakedge WA-4200 Bedienungsanleitung

Pakedge

Pakedge WA-2200-O Bedienungsanleitung

Pakedge

Pakedge WAP-O3G Bedienungsanleitung

Pakedge

Pakedge WA-2200 Series Bedienungsanleitung

Pakedge

Pakedge WX-1-O Bedienungsanleitung

Pakedge

Pakedge C36 Bedienungsanleitung

Pakedge

Pakedge WA-2200 Series Bedienungsanleitung

Pakedge

Pakedge WK-1 Bedienungsanleitung

Pakedge

Pakedge WX-1-O Bedienungsanleitung

Pakedge

Pakedge W6x Bedienungsanleitung

Pakedge

Pakedge WA-4200-C Bedienungsanleitung

Pakedge

Pakedge WA-2200-0-1 Bedienungsanleitung

Beliebte Drahtloser Zugangspunkt Handbücher anderer Marken

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Bedienungsanleitung

Ubiquiti

Ubiquiti NanoStation NSM2 Bedienungsanleitung

Cisco

Cisco Aironet 1550 Series Bedienungsanleitung

Aruba

Aruba IAP-335 Bedienungsanleitung

Advantek Networks

Advantek Networks AWN-AP-54MR Bedienungsanleitung

IP-COM

IP-COM AP355 Bedienungsanleitung

Buffalo

Buffalo AirStation WLA-L11G Bedienungsanleitung

EnGenius

EnGenius EnStationACv2 Bedienungsanleitung

D-Link

D-Link DAP-3662 Bedienungsanleitung

Widelink

Widelink ezWave WAP-1100 Series Bedienungsanleitung

Edimax

Edimax CAP1200 Bedienungsanleitung

xG Technology

xG Technology xMax CN1300 Bedienungsanleitung

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Bedienungsanleitung

Aruba

Aruba AP-203R Bedienungsanleitung

LuXout Shades

LuXout Shades LUXSHADE MOTION Bedienungsanleitung

CreatComm

CreatComm TB5F Bedienungsanleitung

SineDigital

SineDigital MW-1500AP(H) Bedienungsanleitung

TP-Link

TP-Link AP9650 V1 Bedienungsanleitung