Palmer Pechor Chorus Bedienungsanleitung

PECHOR

CHORUS

USER´S MANUAL

BEDIENUNGSANLEITUNG

MANUEL D`UTILISATION

MANUAL DE USUARIO

DEFINE

YOUR

TONE

EN FRDE ES

DEFINE

YOUR

TONE

INTRODUCTION

Congratulations on your purchase of the PALMER Chorus Pedal!

Featuring a heavy duty footswitch and steel housing this

high quality effect provides state-of-the-art multi-voice

chorusing that is rich in depth and lush in intensity. Sep-

arate Rate, Depth and Intensity controls allow for a wide

range of settings.

EN FRDE ES

SAFETY INFORMATION

1. Please read these instructions carefully.

2. Keep all information and instructions in a safe place.

3. Follow the instructions.

4. Observe all safety warnings. Never remove safety warn-

ings or other information from the equipment.

5. Use the equipment only in the intended manner and for

the intended purpose.

6. Use only sufficiently stable and compatible stands and/

or mounts (for fixed installations). Make certain that

wall mounts are properly installed and secured. Make

certain that the equipment is installed securely and

cannot fall down.

7. During installation, observe the applicable safety reg-

ulations for your country.

8. Never install and operate the equipment near radiators,

heat registers, ovens or other sources of heat. Make

certain that the equipment is always installed so that

is cooled sufficiently and cannot overheat.

9. Never place sources of ignition, e.g., burning candles,

on the equipment.

10. Ventilation slits must not be blocked.

11. Do not use this equipment in the immediate vicinity of

water (does not apply to special outdoor equipment - in

this case, observe the special instructions noted be-

low. Do not expose this equipment to flammable materi-

als, fluids or gases.

12. Make certain that dripping or splashed water cannot

enter the equipment. Do not place containers filled

with liquids, such as vases or drinking vessels, on the

equipment.

13. Make certain that objects cannot fall into the device.

EN FRDE ES

14. Use this equipment only with the accessories recommend-

ed and intended by the manufacturer.

15. Do not open or modify this equipment.

16. After connecting the equipment, check all cables in

order to prevent damage or accidents, e.g., due to

tripping hazards.

17. During transport, make certain that the equipment can-

not fall down and possibly cause property damage and

personal injuries.

18. If your equipment is no longer functioning properly,

if fluids or objects have gotten inside the equipment

or if it has been damaged in another way, switch it off

immediately and unplug it from the mains outlet (if it

is a powered device). This equipment may only be re-

paired by authorized, qualified personnel.

19. Clean the equipment using a dry cloth.

20. Comply with all applicable disposal laws in your coun-

try. During disposal of packaging, please separate

plastic and paper/cardboard.

21. Plastic bags must be kept out of reach of children.

FOR EqUIpMENT ThAT CONNECTS TO ThE pOwER MAINS:

22. CAUTION: If the power cord of the device is equipped

with an earthing contact, then it must be connected to

an outlet with a protective ground. Never deactivate

the protective ground of a power cord.

23. If the equipment has been exposed to strong fluctua-

tions in temperature (for example, after transport), do

not switch it on immediately. Moisture and condensation

could damage the equipment. Do not switch on the equip-

ment until it has reached room temperature.

24. Before connecting the equipment to the power outlet,

first verify that the mains voltage and frequency match

the values specified on the equipment. If the equipment

EN FRDE ES

has a voltage selection switch, connect the equipment

to the power outlet only if the equipment values and

the mains power values match. If the included power

cord or power adapter does not fit in your wall outlet,

contact your electrician.

25. Do not step on the power cord. Make certain that the

power cable does not become kinked, especially at the

mains outlet and/or power adapter and the equipment

connector.

26. When connecting the equipment, make certain that the

power cord or power adapter is always freely acces

sible.

Always disconnect the equipment from the power supply

if the equipment is not in use or if you want to clean

the equipment. Always unplug the power cord and power

adapter from the power outlet at the plug or adapter

and not by pulling on the cord. Never touch the power

cord and power adapter with wet hands.

27. Whenever possible, avoid switching the equipment on

and off in quick succession because otherwise this can

shorten the useful life of the equipment.

28. IMPORTANT INFORMATION: Replace fuses only with fuses of

the same type and rating. If a fuse blows repeatedly,

please contact an authorised service centre.

29. To disconnect the equipment from the power mains com

pletely,

unplug the power cord or power adapter from the power

outlet.

30. If your device is equipped with a Volex power con

nector,

the mating Volex equipment connector must be unlocked

before it can be removed. However, this also means that

the equipment can slide and fall down if the power ca-

ble is pulled, which can lead to personal injuries and/

or other damage. For this reason, always be careful

when laying cables.

31. Unplug the power cord and power adapter from the power

EN FRDE ES

outlet if there is a risk of a lightning strike or

before extended periods of disuse.

CAUTION:

Never remove the cover, because otherwise there may be a

risk of electric shock. There are no user serviceable parts

inside. Have repairs carried out only by qualified service

personnel.

The lightning flash with arrowhead symbol within an

equilateral triangle is intended to alert the user to

the presence of uninsulated „dangerous voltage“ with-

in the product‘s enclosure that may be of sufficient

magnitude to constitute a risk of electrical shock.

The exclamation mark within an equilateral triangle

is intended to alert the user to the presence of

important operating and maintenance instructions.

CAUTION – hIGh VOLUME LEVELS wITh AUDIO pRODUCTS!

This equipment is intended for professional use. Therefore,

commercial use of this equipment is subject to the respec

tively

applicable national accident prevention rules and regula

tions.

As a manufacturer, Adam Hall is obligated to notify you

formally about the existence of potential health risks.

Hearing damage due to high volume and prolonged exposure:

When in use, this product is capable of producing high

sound-pressure levels (SPL) that can lead to irreversible

hearing damage in performers, employees, and audience

members. For this reason, avoid prolonged exposure to vol

umes

in excess of 90 dB.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

EN FRDE ES

CAUTION! IMpORTANT INFORMATION ABOUT LIGhTING

pRODUCTS

1. Do not look into the beam from a distance of less than

40 cm.

2. Do not stare into the beam for extended periods at

short-to-medium distances.

3. Do not view the beam directly with optical instruments

such as magnifiers.

4. Under some circumstances, stroboscopic effects may

trigger epileptic seizures in sensitive individu

als! For

this reason, persons who suffer from epilepsy should

always avoid places where strobe lights are used.

EN FRDE ES

7 89

pANEL

EN FRDE ES

pANEL DESCRIpTION

1RATE CONTROL

Adjusts the speed of the modulation. Turning this control

clockwise increases the speed. Turning it counterclockwise

decreases the speed.

2DEpTh CONTROL

Adjusts the amount of modulation. Turning it clockwise

increases the depth of modulation. Turning it counterclock-

wise decreases the depth of modulation.

3ITENSITY CONTROL

Adjusts the amount of Chorus effect that is added to the

signal. Turning it clockwise increases the amunt of chorus

added. Turning it counterclockwise decreases the amount of

chorus added.

4LED

When lit the pedal is “active” or “on”. It also serves as a

battery level indicator.

5ON/OFF SwITCh

This switch determines wether the pedal is “active” oder

“bypassed”. When “active” the red LED will be lit. When “by-

passed” the LED will not be lit.

6IN

Use a quality instrument-cable with 1/4” jacks to plug your

guitar in to this jack

Inhaltsverzeichnis

Sprachen:

Andere Palmer Musikpedal Handbücher

Palmer

Palmer RIVER Series Bedienungsanleitung

Palmer

Palmer PETIMEP Bedienungsanleitung

Palmer

Palmer Peptrem Bedienungsanleitung

Palmer

Palmer PEPENCORE Bedienungsanleitung

Palmer

Palmer root effects HERRENCHOR Bedienungsanleitung

Palmer

Palmer Wupper River Series Bedienungsanleitung

Palmer

Palmer vils Bedienungsanleitung

Palmer

Palmer PEMUTT Mutterstolz Bedienungsanleitung

Palmer

Palmer RIVER Series Bedienungsanleitung

Palmer

Palmer PEPreverb Bedienungsanleitung

Palmer

Palmer PEPBOOST Bedienungsanleitung

Beliebte Musikpedal Handbücher anderer Marken

Behringer

Behringer ULTRA WAH UW300 Bedienungsanleitung

Whirlwind

Whirlwind oc-bass Bedienungsanleitung

Strymon

Strymon Lex-rotary Bedienungsanleitung

Behringer

Behringer PB600 Bedienungsanleitung

Lexicon

Lexicon MX200 Bedienungsanleitung

Dunlop

Dunlop Hendrix 68 Shrine Octavio Fuzz Series Bedienungsanleitung

Matthews Effects

Matthews Effects Whaler V2 Bedienungsanleitung

Grid 1

Grid 1 Pedal Jeanie Bedienungsanleitung

Amptweaker

Amptweaker tightboost Bedienungsanleitung

Ibanez

Ibanez TS-808 Tube Screamer Overdrive Pro Bedienungsanleitung

Dimavery

Dimavery EPVP-50 Bedienungsanleitung

Tefi Vintage Lab

Tefi Vintage Lab GEGÈ Bedienungsanleitung

Pro-MIDI

Pro-MIDI G25 Bedienungsanleitung

DW 7000 Bedienungsanleitung

FAMC

FAMC Liquid-Foot Jr. Series Bedienungsanleitung

Dimavery

Dimavery EPOD-50 Overdrive Bedienungsanleitung

TREX

TREX ToneBug Totenschläger Bedienungsanleitung

BBE

BBE ORANGE SQUASH Bedienungsanleitung