Panasonic F-PXL45A Bedienungsanleitung

F-PXL45A

OPERATION

MAIN PARTS IDENTIFICATION

SETTING AND OPERATING REQUIREMENTS

Air Purifier

OPERATING INSTRUCTIONS

POWER OFF/ON CONTROL

REMOTE CONTROL

ECONAVI

AIR VOLUME SELECTION·TIMER OPERATION·CHILD LOCK

Model No.

This product is for indoor use only

SETUP

CARE AND MAINTENANCE

WHEN IDLE FOR A LONG TIME

CLEANING METHOD

FURTHER INFORMATION

FAQS

BACK COVER

TROUBLESHOOTING

SPECIFICATIONS/

OPTIONAL ACCESSORIES

FILTER REPLACEMENT

SAFETY PRECAUTIONS

CONFIRMATION

AND SETUP

OPERATION CARE AND

MAINTENANCE

OTHER

INFORMATION

Thank you very much for purchasing this Panasonic product.

Please read these operating instructions carefully before operating or servicing the product.

Failure to comply with instructions could result in injury or property damage.

Keep the operating instructions in a safe place for future reference.

CONTENTS

5~6

ACCESSORIES

3~5

8~9

10~13

16~17

14~15

12~13

With “nanoeTM” technology

< airborne fungi > The result is of a 4-hour test in a closed space of 25m3, instead of in actual

application space.

< adhered bacteria > The result is of a 8-hour test in a closed space of 23m3, instead of in actual

application space.

nanoeTM is a microparticle ion wrapped in water by the latest

technology.

With nanoeTM technology, the effect of sterilization 1, allergens

inhibition 2, fungi elimination 3and deodorization 4can be achieved,

thereby creates a conducive environment for hydrated skin..

Test organization: Kitasato Research Center

of Environmental Sciences

Test method: directly expose and measure the

bacteria count collected in a test space of 25m3

Sterilization method: release nanoeTM

Target: airborne fungi

Test outcome: inhibited 99% and above in 4

hours（Test number 24_0301_1）

Test organization: Japan Food Research

Laboratories

Test method: measure the bacteria count

adhered on the fabric in a test space of 23m3

Sterilization method: release nanoeTM

Target: bacteria adhered on the standard fabric

Test outcome: eliminated 99% and above in 8

hours [Test number 13044083003-01]

With a variety of bacterica to test

< airborne fungi > < adhered bacteria >

”Multipurpose air purifier for wall-use, table-use,

floor-use”can filter small particles efficiently by

“HEPA composite filter”.

HEPA composite filter can filter small particles efficiently.

Product can be installed on the wall, used on table or on floor.

Product operates in power saving mode by ECONAVI.

With nanoeTM technology, product can purify air more thoroughly.

This product is not a medical equipment.

Note:nanoeTM

and the nanoeTM

mark are trademarks of Panasonic Corporation.

The deodorizer effect differs according to the surrounding environment (temperature, humidity),

operation time, type of odor or fiber.

This is nanoeTM

device verification result, it is different from the verification of this product.

Test organization: Panasonic Corporation Analysis Center

Test method: measure the allergens adhered on the fabric in a test space of 23m3with ELISA method

Inhibiting method: release nanoeTM

Target: pollen allergens

Test outcome: inhibited 88% and above in 8 hours [BAA33-130402-F01]

Test organization: Panasonic Corporation Analysis Center

Test method: conduct verification by using 6-phase odor intensity in a test space of 23m3

Deodorizing method: release nanoeTM

Target: adhered cigarette odor

Test outcome: odor intensity drops to 1.2 after 2 hours [BAA33-130125-D01]

Test organization: Japan Food Research Laboratories

Test method: measure the fungi count adhered on the fabric in a test space of 23m3

Sterilization method: release nanoeTM

Target: adhered fungi

Test outcome: to confirm the effect after 8 hours [Test number 13044083002-01]

CONFIRMATION

AND SETUP

→

CAUTIONWARNING

WARNING

The safety precautions in this instruction should be strictly followed in order to prevent injury or

damage to the users or properties.

Denotes a hazard that could result in serious

injury or death.

This symbol indicates an action that must

not be performed.

This symbol indicates an action that must

be performed.

Denotes a hazard that could result in minor

injury or damage to property.

The following symbols differentiate the levels of danger and injury that may result if the product is

not used correctly as instructed.

The following symbols are used to indicate the type of instructions that need to be followed.

(The symbols given below are examples)

Do not pull on the power cord

when carrying or storing the

product.

(Otherwise, the power cord may be

damaged with the possibility of fire or

electirc shocks.)

Do not damage the power cord

or power plug.

Do not cut, modify, twist, squeeze the

power cord, and do not place it near

heat sources, place heavy weight on it,

etc.

(Otherwise, the power cord may be

damaged with the possibility of fire or

electirc shocks.)

Do not break, modify or put

battery into fire or near heat.

(If the insulation or exhaust valve is

damaged, the battery may become hot,

crack, and result in injury.)

With function of “detecting, indicating and removing PM2.5”

With “ECONAVI” mode

Wall installation

The product can detect PM2.5 (0.3~2.5µm particles) in air by dirty sensor and remove them by

HEPA composite filter. The PM2.5 pollution indicator will be red when the pollution is serious.

Automatically stops operating when detects the air is clean, meanwhile operates in advance to

eliminate the dirt effectively before spreading, thus reducing the operation time and saving power.

The product can be installed on the wall.

You should contact the dealer for wall

installation if necessary.

WARNING

Do not install the product by yourself.

(Otherwise, the product may fall off due to

inappropriate installation, and cause injury.)

Do not touch the power plug

with wet hands.

(Otherwise, electric shocks

may occur.)

Do not let the product get wet.

(Otherwise, the product may

short circuit with the possibility

of fire or electirc shocks.)

Do not use power other than

the rated voltage (back cover).

(Otherwise, the power cord may be

overheat and induce fire.)

Do not disassemble or modify

the product.

(Otherwise, the product may malfunc-

tion with the possibility of fire or

electric shocks.)

Contact the dealer for repair.

SAFETY PRECAUTIONS Please follow strictly

→

SAFETY PRECAUTIONS

WARNING

CAUTION

Clean the power plug

regularly.

(If dust on the power plug，humidity

may cause damage to insulation and

fire may occur.)

Disconnect the power and wipe it with

a dry cloth.

When the product has not been used

for long period, disconnect the power.

Make sure to disconnect the

power before cleaning the

product.

(Otherwise, the product may to start

suddenly with the possibility of electric

shocks or injury.)

In case of any abnormality or

malfunction, stop using the

product immediately and

disconnect the power.

(Otherwise, electric shocks, fire or

smoke may occur.)

<Examples of abnormality/malfunc-

tion>

The product stops running when

moving the power cord.

If any switches do not work.

If the circuit breaker is tripped or a fuse

blows.

If the power cord or power plug

becomes abnormally hot.

If you notice a burning smell or an

abnormal sound or vibration.

If there is any other abnormalities or

malfunctions.

Please stop using the product immedi-

ately and disconnect the power, and

contact the dealer to check and repair.

Insert the power plug

completely.

(If the power plug is not inserted

securely, electirc shock or fire may

occur due to short circuit.)

Do not use damaged power plug or

loose power socket.

Do not place your fingers or

metal objects into the air inlet

or air outlet.

(Otherwise, you may be hurt by the

inner units with the possibility of

electric shocks or injury.)

Anyone with a medical pace-

maker, please keep the

implantation site far away

from the remote control fixed

on the product.

(The pacemaker may be negatively

affected, because of the magnet used

to fix the remote control .)

Make sure the power cord is

not clipped between the prod-

uct and wall during wall instal-

lation.

(Otherwise, the power cord may

damage and fire or electric shocks may

occur.)

If the supply cord is damaged,

it must be replaced by the

manufacturer, its service agent

or similarly qualified persons in

order to avoid a hazard.

(Otherwise, fire or electric shocks may

occur.)

Keep the room well-ventilated

when using the product

together with a burner.

(Otherwise, carbon monoxide poisoning

may occur.)

This product cannot remove carbon

monoxide.

When disconnectging the

power, hold the power plug

instead

of the power cord.

(Otherwise, the power cord may

damage with the possibility of fire or

Keep the battery out of reach

of children and infants.

(Otherwise, it may be swallowed. If

swallowed, seek medical help immedi-

ately.)

Please follow strictly

Area of the

built-in magnet

CONFIRMATION

AND SETUP

→

CAUTION

Do not clean the product with

gasoline or other volatile mix-

ture solvents, and avoid con-

tacting with spray insecticides.

(Otherwise, the product may crack or

short circuit with the possibility of

injury, fire or electric shock.)

Do not operate this product in

places where indoor fumiga-

tion type insecticides are being

used.

(Chemical residue may build up inside

the product and discharge from the air

outlet, damaging health.)

Ventilate the room with fresh air thor-

oughly after using insecticides before

operating the product.

Do not sit on or lean against

this product.

(Otherwise, the product may fall over

and injury may occur.)

Families with children should pay more

attention.

Do not place the product near

combustible materials such as

lighted cigarette, incense etc.

(Otherwise, these may be absorbed

into the product with possibility of

fire.)

Do not place the product in

the following places.

Do not place in incline and unstable

place.

(Otherwise, the prouduct may fall over

and injury may occur.)

Where the temperature or humidity is

too high, or water area, such as bath-

room.

(Otherwise, the product may leak

current with the possibility of fire or

electric shock.)

Places where oil content is airborne,

such as in kitchens.

(Otherwise, the product may crack

and injury may occur.)

Where oil or inflammable gas is present

and may be leaked.

(Otherwise, a fire may occur due to

ignition in the product.)

Where the air outlet faces animals or

plants directly.

(Otherwise, it may cause discomfort to

animals and dry out plant.)

Do not carry the product by

holding the front panel.

(Otherwise, the product may slip out

and injury may occur.)

When the product is installed

on wall, be careful not to crash

the product while walking.

(Otherwise, injury may occur.)

This product is not intended for use by persons (including children) with reduced physical, sensory

or mental capabilities, or lack of experience and knowledge, unless they have been given supervi-

sion or instruction concerning use of the product by a person responsible for the safety.

Children should be supervised to ensure that they do not play with the product.

SETTING AND OPERATING REQUIREMENTS

→

Do not set the product in the

following places.

Where the product will be exposed directly to

sunlight or outlet of air conditioner.

(Otherwise, deformation, degeneration,

discolor and malfunction may be occured.)

Near equipment such as TV and radio.

(Otherwise, visual disturbances or noises may

be caused.)

Keep the product 1m or above away from such

devices.

Do not use the same power socket

with TV, radio etc.

(Otherwise, visual disturbances or noises may

be caused.)

In this case, insert the power plug into another power

socket.

Do not use other remote control with

this product.

(Otherwise, an operation error or malfunction

may be caused.)

SAFETY PRECAUTIONS Please follow strictly

ACCESSORIES

The following accessories are provided with the product in package. When you unpack, check if the

accessories are all included. If not, please contact the dealer.

SETTING AND OPERATING REQUIREMENTS

Area that can enhance the effectiveness!

Area of the

built-in magnet

A magnet is installed at the upper left corner of the product.

Always keep items, such as watch, credit card away from

this product.

(The magnet may disable your watch or credit card.)

If the product is used in the same place for a long period.

Using the product continuously at the same location may result in the surrounding walls or floor to

become dirty. We recommend that you move the product away from where it is placed for mainte-

nance when the product is used on floor or table.

Set it on the floor or table or install it on the

wall against PM2.5 and indoor dust etc.

Way to circulate air more effectively.

Install the equipment with its left, right and top about 30cm or more away from walls,

furniture or curtains, etc, otherwise the dirty air is difficult to be cleared.

To ensure effectiveness of this product, keep its back at least 1cm away from the wall.

The product can be installed on

the wall. You should contact the

dealer for wall installation if necessary.

WARNING

Do not install the product by yourself.

(Otherwise, the product may fall off due to

inappropriate installation, and cause injury.)

The remote receiver should not be exposed directly to sunlight or the

glare of lighting appliance.

(Otherwise, the remote control may be difficult to operate.)

Code Drawing QuantityName and Purpose

Remote control

Operating instructions

Installation instructions

Fixation board

(for suspending product body)

Metal hanger

(for suspending product body)

Self- tapping screw

(ø3.8x30, for fixing fixation board)

Self- tapping screw

(ø4X14, for fixing metal hanger)

Machine screw

(M4X12, for fixing metal hanger)

Plastic plug

(ø8x35, for fixing screw to the mounting hole)

Explosive screw set

(for fixing fixation board)

CONFIRMATION

AND SETUP

MAIN PARTS IDENTIFICATION

Control

panel

Display

panel

Front Back

Air pollution indicator

Dirt sensor

Dirt sensor and Odor sensor

Air pollution indicator

Front

panel

Front

panel

Body

Deodorizing filter

HEPA composite filter

Air inlet

(both sides) Air inlet

(front)

Air outlet (nanoeTM outlet)

Dirt sensor can detect air pollutants such as PM2.5 (0.3~2.5µm particles) etc.

Odor senor can detect odor such as smoke etc.

The sensitivity of the sensor can be changed. (P.16)

Show the air pollution levels detected by sensors.

Blue: indicates clean

Purple: indicates a little dirty

Red: indicates dirty

For guiding the direction of power cord, and adjusting the power

cord’s length by winding on it 1 circle.

Power cord guiding clip

Odor sensor

Power cord

guiding clip

Power plug

Handle

(left and right)

Notice

SETUP

Remove the front panel.

Front panel

Pull then push up

with both hands

Deodorizing filter

(wrapped in a

black net)

HEPA composite

filter

Pull

Toggle the filter hook upward,

and remove the filters.

Filter hook (Turn up)

Remove the deodorizing filter from

the poly bag.

Poly bag

Be sure to read P.3~6 before setting up the

product.

Please do not remove the black net of

deodorizing filter.

Before startup

Fill in the label with

the first date of use.

Remove the deodorizing

filter from the poly bag.

Install filters

F-ZXLP45Z

F-ZXLD45Z

F-ZXLP45Z

F-ZXLD45Z

CONFIRMATION

AND SETUP

Notice

SETUP

Deodorizing filter

Insert into the hole

Handle

HEPA composite filter

Filter fixed rib

Push the protrusion on the

bottom of front panel into

the holes of the product,

then insert the protrusion on

the top of front panel into

the holes of the product.

Be sure to install the front panel

before use.

Be sure that the filters are placed

inside filter fixed rib after installing

the filters.

Install the filters and front panel.

Install the deodorizing filter.

(There is no difference

between sides and direction.)

Install the HEPA composite filter.

(Please make sure that the side

with handles face out. However,

there is no difference between

upper and lower.)

Install the front panel.

Press button, and the

air pollution indicator blinks

for about 5 seconds.

Install filters

Insert the

power plug.

Power-on

As the odor sensor detects

the cleanliness after the

power plug is inserted, we

recommend that you insert

the power plug when the air

is fresh (such as when there

is no cigarette smoke).

(The standard of the odor

sensor automatically updates

itself according to the indoor

cleanliness.)

Filter fixed rib

Toggle the filter hook

downwards, and secure the

filter.

Filter hook (Turn down)

Control panel

Display panel

OPERATION

ECONAVI button

ECONAVI

indicator

Light

indicator

Light

sensor

Child lock button

Child lock

indicator

Timer button

Timer

indicator

PM2.5 pollution

indicator

Press the button again, the product stops operating.

Turn on or off.

Press the button to operate.

The product operates in auto air volume mode for first time usage, then it will

operate based on the last used mode when it is resumed.

Filter replacement

indicator

Air volume button

Air volume

indicator

Remote

receiver

nanoeTM indicator

Sleep

indicator

Power Off/On

button

Power Off/On control

POWER OFF/ON CONTROL

PM2.5 pollution indicator

Indicates the nanoeTM is genarating when

the indicator lights up. If you want to

switch off nanoeTM, please see P.16.

Indicates severe air pollution when the indicator

becomes red. From PM2.5 detection to shown up

may take some time.

Light indicator

When indicator lights up, indicates the light sensor is detecting the indoor brightness .

When the room becomes dark, the product enters “sleep mode auto operation”. (P.17)

nanoeTM indicator

Andere Handbücher für F-PXL45A

Inhaltsverzeichnis

Andere Panasonic Luftreiniger Handbücher

Panasonic

Panasonic F-PXL45A Bedienungsanleitung

Panasonic

Panasonic F-PXU70A Bedienungsanleitung

Panasonic

Panasonic EH3012 - AIR PURIFIER-PHCC Bedienungsanleitung

Panasonic

Panasonic F-PXL45H Bedienungsanleitung

Panasonic

Panasonic F-P04DXZ Bedienungsanleitung

Panasonic

Panasonic F-PBJ30M Bedienungsanleitung

Panasonic

Panasonic ET-RFE16 Bedienungsanleitung

Panasonic

Panasonic F-PXM55M Bedienungsanleitung

Panasonic

Panasonic F-PXJ30A Bedienungsanleitung

Panasonic

Panasonic F-PXV35H Bedienungsanleitung

Panasonic

Panasonic F-VXM35M Bedienungsanleitung

Panasonic

Panasonic F-PXJ30M Bedienungsanleitung

Panasonic

Panasonic F-VXV70A Bedienungsanleitung

Panasonic

Panasonic FP15HU2 Bedienungsanleitung

Panasonic

Panasonic F-PXV55M Bedienungsanleitung

Panasonic

Panasonic FV-01VCN1 Bedienungsanleitung

Panasonic

Panasonic F-PXV55H Bedienungsanleitung

Panasonic

Panasonic FP20HU1 Bedienungsanleitung

Panasonic

Panasonic EH3020 - AIR PURIFIER-PHCC Bedienungsanleitung

Panasonic

Panasonic ziaino F-JPW50H Bedienungsanleitung

Panasonic

Panasonic F-P15EHH Bedienungsanleitung

Panasonic

Panasonic FP15HU1 Bedienungsanleitung

Panasonic

Panasonic EH-366 Bedienungsanleitung

Panasonic

Panasonic F-PXF35X Bedienungsanleitung

Beliebte Luftreiniger Handbücher anderer Marken

IKEA

IKEA UPPÅTVIND Bedienungsanleitung

Nash

Nash AP-1 PureSmart Bedienungsanleitung

LG PH-U450 Series Bedienungsanleitung

DeLonghi

DeLonghi DDSX 220WFA Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric MA-E85R-E Bedienungsanleitung

Sharp

Sharp FU-40SE Bedienungsanleitung

Philips

Philips AC2721 Bedienungsanleitung

TruSens

TruSens Z-2000 Bedienungsanleitung

Motorola

Motorola MBP87SN Bedienungsanleitung

Beko

Beko ATP 7100I Bedienungsanleitung

Carrier

Carrier INFINITY 1620 Bedienungsanleitung

AtmosAir

AtmosAir P2002 Bedienungsanleitung

Winix

Winix NK300 Bedienungsanleitung

Friedrich

Friedrich C-90A Bedienungs- und Montageanleitung

Surgically Clean Air

Surgically Clean Air JADE2.0 Bedienungsanleitung

Base aire

Base aire 555 Pro Bedienungsanleitung

Champion

Champion CP25 Bedienungsanleitung

vollara

vollara Air & Surface Pro+ Bedienungsanleitung