Panasonic F-PZT175H Bedienungsanleitung

Air Purifier

OPERATING INSTRUCTIONS

This product is for indoor use only.

Model No.

CONTENTS

OPERATION OTHER

INFORMATION

CONFIRMATION

AND SETUP MAINTENANCE

SAFETY PRECAUTIONS ............................2~4

OPERATING REQUIREMENTS ....................... 4

PRODUCT FEATURES ...............................4~6

MAIN PARTS IDENTIFICATION .................6~8

SETUP....................................................8~10

OPERATION.........................................10~15

·POWER OFF/ON AIR VOLUME SILENT AUTO .........11

·PM2.5 ........................................................12

·TIMER.........................................................13

·REMOTE CONTROL .................................. 14~15

MAINTENANCE....................................16~18

·CLEANING METHOD................................. 16~17

·FILTER REPLACEMENT .............................. 17~18

·WHEN IDLE FOR A LONG TIME .........................18

FURTHER INFORMATION .....................18~21

FAQ.....................................................21~22

TROUBLESHOOTING............................22~23

SPECIFICATIONS....................... BACK COVER

2~4

4~6

6~8

8~10

10~15

PM2.5 12

14~15

16~18

16~17

17~18

18~21

21~22

22~23

Panasonic

2~4

“ ”

Thank you very much for purchasing this Panasonic product.

Please read these operating instructions carefully before operation and maintenance.

Also, be sure to read the “SAFETY PRECAUTIONS” section (P.2~4) before use.

Failure to comply with instructions could result in injury or property damage.

Make sure that the correct information is written on the warranty card, including the date of

purchase and the name of the distributor. Keep the warranty card in a safe place along with the

operating instructions for future reference.

Warranty card attached

SAFETY PRECAUTIONS Please strictly follow

This product is not intended for use by persons (including children) with reduced physical,

sensory or mental capabilities, or lack of experience and knowledge, unless they have been

given supervision or instruction concerning use of the product by a person responsible for the

safety. Children should be supervised to ensure that they do not play with the product.

Disconnect power supply before maintenance.

For cleaning see "maintenance“ .

The safety precautions should be strictly followed in order to prevent injury or damage to properties.

The following symbols differentiate the levels of danger or injury that may result if the product is

not used correctly as instructed.

CAUTIONWARNING

Those things shown in this column indicate that

there is possibility of causing death or severe

injury.

Those things shown in this column indicate that

there is possibility of causing minor injury or

damage to properties .

This symbol indicates an action that

must not be performed.

This symbol indicates an action that

must be performed.

The following symbols are used to indicate the type of instructions that need to be followed.

(The symbols given below are examples)

WARNING

Do not insert your fingers,

metallic objects or others into

the air inlet, air outlet or gaps.

Do not let the product get wet,

such as spray water to the

product during cleaning.

Keep battery out of reach of

children and infants.

Do not put battery into fire or

heat, break, modify it.

(Otherwise, you may be hurt by the

inner units with the possibility of

electric shock or injury.)

(Otherwise, the product may short

circuit with the possibility of fire or

electric shock.)

(If the battery is swallowed, seek

medical help immediately.)

(If the insulation or exhaust value is

damaged, the battery may become

hot, crack.

SAFETY PRECAUTIONS Please strictly follow

WARNING

Do not disassemble or modify

the product.

Contact the dealer for repair.

In case of any abnormality or

malfunction, stop using the

product immediately and

disconnect the power.

(Otherwise, electric shock, fire or

smoke may occur.)

Examples of abnormality/malfunction>

If any switches do not work.

If the circuit breaker is tripped or when

fuse blows.

If you notice a burning smell or an

abnormal sound or vibration.

If there is any other abnormalities or

malfunction.

Please stop using the product immedi-

ately and disconnect the power, and

contact the dealer to check and repair.

(Otherwise, this product may cause

injuries once it falls off.)

If you will not use this product

any more, remove the product.

CAUTION

Do not operate this product in

places where indoor fumiga-

tion type insecticides are being

used.

Ventilate the room with fresh air thor-

oughly after using insecticides before

operating the product.

(Chemical residue may build up inside

the product and discharge from the air

outlet, and cause damage to health.)

Do not clean the product with

gasoline or other volatile mix-

ture solvents, and avoid con-

tacting with spray insecticides.

(Otherwise, the product may crack or

short circuit with the possibility of

injury, fire or electric shock.)

CONFIRMATION

AND SETUP

(Otherwise, the product may catch

fire or malfunction, thus resulting in

fire or electric shock.)

SAFETY PRECAUTIONS Please strictly follow

Keep the room well-ventilated

when using the product

together with a burner.

(Otherwise, carbon monoxide

poisoning may occur.)

This product cannot remove carbon

monoxide.

Do not place the product near

combustible materials such as

lighted cigarette, incense, etc.

(Otherwise, these may be absorbed

into the product with possibility of fire.)

CAUTION

Do not put any obstacles at the inlet and

outlet of the product.

Do not place any objects on the product.

(Otherwise, it may affect product

performance.)

(Otherwise, an operation error or

malfunction may be caused.)

OPERATING REQUIREMENTS

PM2.5

PM2.5 PM2.5

nanoe®

(CADR )400 m3/h

Equipped with the nanoe® technology for thorough purification

The clean air volume for formaldehyde (CADRformaldehyde) is higher than 400 m3/h and

thus decoration pollutants like formaldehyde can be removed.

PRODUCT FEATURES

With the efficient "composite and deodorizing filter" and

"large air volume” design, it brings you fresh and clean air

The efficient composite and deodorizing filter strongly filters out PM2.5 and formaldehyde

Four sensors are equipped: a dirt sensor, an odor sensor, a light sensor and a human

activity sensor

The PM2.5 concentration reading display keeps you updated with the indoor PM2.5

pollution level

A remote control is supplied for touch screen operation

nanoe® 1 2 3

With nanoe® technology, the effects of sterilization 1, allergens

inhibition 2, fungi elimination 3 and deodorization 4 can be achieved,

thereby creates a conducive environment for hydrated skin.

PRODUCT FEATURES

CONFIRMATION

AND SETUP

About nanoe®

nanoe® is a microparticle ion wrapped in water by the latest technology.

< airborne fungi >

<airborne fungi> The result is of a 4-hour test in a closed space of 25 m3, instead of in actual

application space.

<adhered bacteria> The result is of a 8-hour test in a closed space of 23 m3, instead of in actual

application space.

nanoe®

25 m34

23 m38

Test organization: Kitasato Research Center of Environmental Sciences

Test method: directly expose and measure the fungi count collected in a test space of 25 m3

25 m3

Sterilization method: release nanoe®

nanoe®

Target: airborne fungi

Test outcome: eliminated 99% and above in 4 hours Test number 24_0301_1

4 99% 24_0301_1

Test organization: Panasonic Corporation Analysis Center

Test method: measure the allergens adhered on the fabric in a test space of 23 m3 with ELISA

method

Inhibiting method: release nanoe®

Target: pollen allergens

Test outcome: inhibited 88% and above in 8 hours [BAA33-130402-F01]

Test organization: Japan Food Research Laboratories

Test method: measure the fungi count adhered on the fabric in a test space of 23 m3

Sterilization method: release nanoe®

Target: adhered fungi

Test outcome: confirmed the effect after 8 hours [Test number 13044083002-01]

< adhered bacteria >

Test organization: Japan Food Research Laboratories

Test method: measure the bacteria count adhered on the fabric in a test space of 23 m3

23 m3

Sterilization method: release nanoe®

nanoe®

Target: bacteria adhered on the standard fabric

Test outcome: eliminated 99% and above in 8 hours [Test number 13044083003-01]

(With one type in variety of bacteria to test)

8 99% 13044083003-01

ELISA 23 m3

nanoe®

8 88% BAA33-130402-F01

23 m3

nanoe®

8 13044083002-01

Dirt sensor and Odor sensor

Dirt sensor can detect air pollutants such as PM2.5(0.3 µm~2.5 µm particles), etc.

Odor senor can detect odor such as smoke, etc.

The sensitivity of sensor can be adjusted. (P.19)

PM2.5(0.3 µm~2.5µm )

(19 )

MAIN PARTS IDENTIFICATION

(nanoe®)

( )

Front Back

Front panel/Air outlet

(nanoe® emission outlet) Dirt sensor Hanger (4 pcs)

Dirt senso

Odor sensor

Air inlet

Control panel

(touch screen)

Front panel

lock cover

Pre-filter (2 pcs)

PRODUCT FEATURES

4Test organization: Panasonic Corporation Analysis Center

Test method: conduct verification by using 6-phase odor intensity in a test space of 23 m3

Deodorizing method: release nanoe®

Target: adhered cigarette odor

Test outcome: odor intensity dropped to 1.2 after 2 hours [BAA33-130125-D01]

23 m36

nanoe®

2 1.2 BAA33-130125-D01

This product is not a medical equipment.

nanoe® and the nanoe® mark are trademarks of Panasonic Corporation.

The deodorizer effect differs according to the surrounding environment (temperature, humidity),

operation time, type of odor or fiber.

This is nanoe® device verification result, it is different from the verification of this product.

nanoe®

nanoe®nanoe®

PM2.5

PM2.5 PM2.5

Indicates the current air volume status. (When

the product stops operating, the control panel

does not display this indicator.)

This indicator lights on simultaneously when

the PM2.5 concentration/timer display

window displays the PM2.5 concentration.

MAIN PARTS IDENTIFICATION

This indicator lights on to indicate that the light

sensor is sensing the indoor brightness. (When

the product stops operating, the control panel

does not display this indicator.)

When the movement of a person or pet is detected,

the air volume is automatically adjusted (when the

air volume is set to auto). (Not all pet movements

can be detected.)The sensor sensitivity is adjustable.

(P. 21)

Light sensor indicator

Human sensor

PM2.5 indicator

Air volume indicator

PM2.5

15 PM2.5

PM2.5

The indicator lights on indicates you need to

replace composite and deodorizing filter.

(P 17~18)

Filter replacement indicator

Clean sign

17~18

Detects the indoor brightness by the light

sensor, and automatically adjusts the

brightness of the indicators and the air

volume. (P. 20)

Light sensor

Blue: Indicates clean

Purple: Indicates slight dirty

Red: Indicates dirty

Show the air pollution levels detected

by dirt sensor and odor sensor.

This indicator lights on to indicate that you need

to clean the composite and deodorizing filter.

(P. 17)

Displays the PM2.5 concentration detected by the dirt

sensor, which may be different from the value tested

by other special devices. Please use this PM2.5

concentration value as a reference.

When the timer is set, the timing time will be

displayed. After about 15 seconds since the timer

setting has completed, it will automatically jump

to display the current PM2.5 concentration.

Filter cleaning indicator

PM2.5 concentration/timer display window

Air

volume

button PM2.5

PM2.5 /

Control panel

PM2.5

Timer

button

PM2.5

button

Silent

Auto

button

Power

off/on

button

Filter replacement

indicator

nanoe®

nanoe® indicator Clean sign

Filter cleaning

indicator Air

volume

indicator

(PM2.5 Concentration/

Timer Display Window)

Light sensor

Remote

receiver

Human

sensor

PM2.5

indicator

Light

sensor

indicator

Human

sensor

indicator

CONFIRMATION

AND SETUP

(1)

(2)

Press the front panel lock cover (2 pcs) with both fingers at

the same time.

SETUP

Before startup Install filters

Fill in the label with

the first date of use. Installing composite and deodorizing filter.

90°

Make sure to read page 2 to 4

before setting up the product.

Notice

2~4

When opening the front panel lock cover, the opening angle

shall not be greater than 90 degrees. Otherwise it may get

damaged.

Hold the front panel locks with your finger and open the

front panel (2 pcs).

Front panel lock cover

Front panel lock

Replacement composite and deodorizing filter

MAIN PARTS IDENTIFICATION

nanoe®

nanoe®nanoe®

(18 )

3 PM2.5

Notice

You can touch and hold and simultaneously for about 3 seconds to close the PM2.5

concentration/timer display window and the lit indicators (except for the lit control buttons and

air volume indicator); touch and hold them again for about 3 seconds to turn them back on.

nanoe® indicator

The indicator lights on indicates

nanoe® is being generated.

nanoe® will be generated in all

operation modes except you switch off

it. (P.18)

This indicator lights on to indicate that the

human activity sensor is sensing.

(When the product stops operating, the

control panel does not display this indicator.)

Human sensor indicator

(

(4)Remove the composite and deodorizing filter (2 pcs) from the poly bag.

Poly bag

Front panel lock cover

Front panel lock Filter side

When installing and removing the composite and deodorizing filter, be careful not to hit the front

panel lock cover and front panel lock.

Composite and deodorizing filter

(black side (active carbon side) faces upward)

The arrow on the composite and deodorizing filter (2 pcs) faces to the front panel and install it into

the body.

Install filters

Arrow

Notice

SETUP

(5)

(3)

2 15°

Notice

Guide lock

When opening the front panel, pay attention to

the gap and corner position between the two

panels to prevent your fingers being clamped.

Lift up the front panel with both hands while holding down the guide lock with your thumbs and

slowly lowering the front panel (2 pcs).(Front panel can only be opened about 15 degrees).

CONFIRMATION

AND SETUP

Install filters

Front panel lock cover

SETUP

PM2.5

Close the front panel lock cover (2 pcs).

Front panel

press , and the “clean sign” blinks about

5 seconds.

Power on, PM2.5 concentration / timer

display window shows PM2.5 concentration.

When connecting power, the odor sensor

takes this moment as the baseline for the

level of cleanliness, so it is recommended

when the air in the room is clean (such as

when there is no cigarette smoke).

(the odor sensor baseline is updated

automatically depending on the level of

cleanliness in the room)

(7)

Power-on

Power-on.

OPERATION

This product adopts touch screen operation, contact area is as large as possible when using finger

to press (if contact area is too small, may result in no response after touch).

If power is disconnected while operating, when it is connected again, the product will automatically

restart and operate in the mode it was in when power was lost.

PM2.5

Timer button PM2.5 button

Silent Auto button Air volume button

Power off/on button

Close the front panel (2 pcs) slowly.

Make sure the front panel is closed in the position.

Notice

(6)

Front panel

Inhaltsverzeichnis

Andere Panasonic Luftreiniger Handbücher

Panasonic

Panasonic F-PXV55M Bedienungsanleitung

Panasonic

Panasonic F-PXJ30M Bedienungsanleitung

Panasonic

Panasonic Ziaino F-JPT70H Bedienungsanleitung

Panasonic

Panasonic F-PXL35H Bedienungsanleitung

Panasonic

Panasonic F-VXF70A Bedienungsanleitung

Panasonic

Panasonic F-VXR50M Bedienungsanleitung

Panasonic

Panasonic EH-366 Bedienungsanleitung

Panasonic

Panasonic FP15HU2 Bedienungsanleitung

Panasonic

Panasonic F-PXT70H Bedienungsanleitung

Panasonic

Panasonic F-GMG01H Bedienungsanleitung

Panasonic

Panasonic ET-RFE300 Bedienungsanleitung

Panasonic

Panasonic F-P04DXZ Bedienungsanleitung

Panasonic

Panasonic F-PXF35X Bedienungsanleitung

Panasonic

Panasonic F-P36X8C-ES Bedienungsanleitung

Panasonic

Panasonic F-PXV35M Bedienungsanleitung

Panasonic

Panasonic F-VXL40M Bedienungsanleitung

Panasonic

Panasonic F-VXL95M Bedienungsanleitung

Panasonic

Panasonic F-PXM55M Bedienungsanleitung

Panasonic

Panasonic EH3015 - AIR PURIFIER-PHCC Bedienungsanleitung

Panasonic

Panasonic F-PXM55A Bedienungsanleitung

Panasonic

Panasonic F-PXV50A Bedienungsanleitung

Panasonic

Panasonic F-PXL45M Bedienungsanleitung

Panasonic

Panasonic F-PXR40H Bedienungsanleitung

Panasonic

Panasonic EH-366 Bedienungsanleitung

Beliebte Luftreiniger Handbücher anderer Marken

IKEA

IKEA UPPÅTVIND Bedienungsanleitung

Nash

Nash AP-1 PureSmart Bedienungsanleitung

LG PH-U450 Series Bedienungsanleitung

DeLonghi

DeLonghi DDSX 220WFA Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric MA-E85R-E Bedienungsanleitung

Sharp

Sharp FU-40SE Bedienungsanleitung

Philips

Philips AC2721 Bedienungsanleitung

TruSens

TruSens Z-2000 Bedienungsanleitung

Motorola

Motorola MBP87SN Bedienungsanleitung

Beko

Beko ATP 7100I Bedienungsanleitung

Carrier

Carrier INFINITY 1620 Bedienungsanleitung

AtmosAir

AtmosAir P2002 Bedienungsanleitung

Winix

Winix NK300 Bedienungsanleitung

Friedrich

Friedrich C-90A Bedienungs- und Montageanleitung

Surgically Clean Air

Surgically Clean Air JADE2.0 Bedienungsanleitung

Base aire

Base aire 555 Pro Bedienungsanleitung

Champion

Champion CP25 Bedienungsanleitung

vollara

vollara Air & Surface Pro+ Bedienungsanleitung