Panasonic FZ-VEBN141 Bedienungsanleitung

Operating Instructions

Instructions d’utilisation

Bedienungsanleitung Vielen Dank, dass Sie sich für den Kauf dieses

Panasonic-Produkts entschieden haben.

Bevor Sie dieses Produkt verwenden, lesen Sie

diese Anweisungen und Vorsichtsmaßnahmen

durch und bewahren Sie sie für die zukünftige

Verwendung auf.

Thank you for purchasing a Panasonic product.

Before operating this product, please read these

instructions and precautions, and save them for

future use.

取扱説明書保証書付き（日本国内向け）

●取扱説明書をよくお読みのうえ、正しく安全にお使いください。

●ご使用前に「安全上のご注意」（36〜40ページ）を必ずお読みください。

●保証書は「お買い上げ日・販売店名」などの記入を確かめ、

取扱説明書とともに大切に保管してください。

Nous vous remercions d’avoir acheté un produit

Panasonic.

Avant d’utiliser ce produit, veuillez lire les présentes

instructions et précautions et les conserver pour

usage ultérieur.

FRANÇAIS 日本語DEUTSCHENGLISH

5-Bay Cradle

Cradle für 5 Akkus

Station d’accueil multi appareils (5 baies)

クレードル（5連式）

Model No.

FZ-VEBN141

DHQX1460ZA/P1 C0218-0Printed in China

For U.S.A.

Federal Communications Commission Radio Frequency

Interference Statement

Note:

RThis equipment has been tested and found to comply with the limits for a Class

A digital device, pursuant to part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful interference when the

equipment is operated in a commercial environment.

This equipment generates, uses, and can radiate radio frequency energy and, if

not installed and used in accordance with the instruction manual, may cause

harmful interference to radio communications. Operation of this equipment in a

residential area is likely to cause harmful interference in which case the user will

be required to correct the interference at his own expense.

Warning:

RTo assure continued FCC emission limit compliance, use only shielded interface

cables when connecting to computer or peripheral devices.

Any changes or modifications not expressly approved by the party responsible

for compliance could void the user’s authority to operate this equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions:

1. This device may not cause harmful interference, and

2. This device must accept any interference received, including interference that

may cause undesired operation.

Responsible party

Panasonic Corporation of North America

Two Riverfront Plaza, Newark, NJ 07102, USA

Support contact: http://business.panasonic.com/support-computerstablets

For Europe

Declaration of Conformity (DoC)

"Hereby, Panasonic declares that this 5-Bay Cradle is in compliance with the

essential requirements and other relevant provisions of EU Council Directives."

Authorised Representative:

Panasonic Testing Centre

Panasonic Marketing Europe GmbH

Winsbergring 15, 22525 Hamburg, Germany

Warning: This equipment is compliant with Class A of CISPR 32. In a residential

environment this equipment may cause radio interference.

Disposal of Old Equipment

Only for European Union and countries with recycling

systems

This symbol on the products, packaging, and/or accompanying

documents means that used electrical and electronic products must

not be mixed with general household waste.

For proper treatment, recovery and recycling of old products, please

take them to applicable collection points in accordance with your

national legislation.

By disposing of them correctly, you will help to save valuable

resources and prevent any potential negative effects on human

health and the environment. For more information about collection

and recycling, please contact your local municipality.

Penalties may be applicable for incorrect disposal of this waste, in

accordance with national legislation.

Interface Cable

RUse of an interface cable longer than 3 m is not recommended.

To ensure Compliance to the EMC Directive, shielded LAN cables shall be used.

Ecodesign information

Ecodesign information under EU Regulation (EC) No.1275/2008 amended by (EU)

Regulation No.801/2013. From 1 January 2015.

please visit here: www.ptc.panasonic.eu

click [Downloads] ® Energy related products information (Public)

Power consumption in networked standby and guidance are mentioned in the web

site above.

For UK

For your safety, please read the following text carefully.

This appliance is supplied with a molded three pin mains plug for your safety and

convenience.

A 3 ampere fuse is fitted in this plug.

Should the fuse need to be replaced please ensure that the replacement fuse has

a rating of 3 ampere and that it is approved by ASTA or BSI to BS1362.

Check for the ASTA mark

A S A

or the BSI mark on the body of the fuse.

If the plug contains a removable fuse cover you must ensure that it is refitted when

the fuse is replaced.

If you lose the fuse cover the plug must not be used until a replacement cover is

obtained. A replacement fuse cover can be purchased from your local dealer.

If the fitted molded plug is unsuitable for the socket outlet in your home then the

fuse should be removed and the plug cut off and disposed of safely.

There is a danger of severe electrical shock if the cut off plug is inserted into any

13-ampere socket.

How to replace the fuse

The location of the fuse differs according to the type of AC mains plug (figures A

and B).

Confirm the AC mains plug fitted and follow the instructions below. Illustrations may

differ from actual AC mains plug.

Open the fuse cover with a screwdriver and replace the fuse and close or attach

the fuse cover.

Figure A Figure B

Fuse cover

India Only

Declaration of Conformity with the requirements of the E-Waste (Management)

Rules

The Product is in conformity with the requirements of the reduction of hazardous

substances of the E-Waste Rules.

The content of hazardous substance with the exemption of the applications listed in

SCHEDULE II of the E-waste Rules:

1. Lead (Pb) – not over 0.1 % by weight;

2. Cadmium (Cd) – not over 0.01 % by weight;

3. Mercury (Hg) – not over 0.1 % by weight;

4. Hexavalent chromium (Cr6+) – not over 0.1 % by weight;

5. Polybrominated biphenyls (PBBs) – not over 0.1 % by weight;

6. Polybrominated diphenyl ethers (PBDEs) – not over 0.1 % by weight.

For the purpose of recycling to facilitate effective utilization of

resources, please return this product to a nearby authorized

collection center, registered dismantler or recycler, or Panasonic

service center when disposing of this product.

Please see the Panasonic website for further information on

collection centers, etc. , or call the toll-free number below.

Website:

http://www.panasonic.com/in/corporate/sustainability/

panasonic-india-i-recycle-program.html

Service helpline: 1800 103 1333 or 1800 108 1333

Contents

Introduction page 6

Safety precautions page 7

Handling and maintenance page 9

Description of parts page 10

Connections page 11

Docking and removing the unit page 12

Troubleshooting page 13

Specifications page 13

Introduction

This product is designed for use with the Panasonic FZ-N1 and FZ-F1 series

(hereinafter referred to as "the unit") (as of February 2018).

RAlso thoroughly read the Operating Instructions of the unit.

Main features

The following features can be used for up to five units simultaneously.

– Charge a unit

– Connect to a network via the LAN ports

Compatible batteries

RFZ-VZSUN110

RFZ-VZSUN120

Included accessories

RAC Adaptor (Model number CF-AA5713A) x 1

RAC Cord*1 x 1

ROperating Instructions (this document) x 1

*1 Do not use the supplied AC cord with any products other than CF-AA5713A.

Note:

RSome illustrations in this document may look different from the actual product.

Also, the details of the descriptions may vary due to differences between the

software versions of the unit.

RInformation in this document is subject to change without notice.

Safety precautions

RCharge only specified units or batteries.

Charging unspecified units or batteries may result in electrolyte leakage,

overheating, smoke, rupture, or a fire.

RWhen using the product for extended periods, do not expose your skin to

the AC adaptor for a prolonged period.

Generated heat can cause low-temperature burns.

RDo not disassemble, repair, or modify the product.

Doing so may cause a short circuit or overheating, which may result in a fire or

electric shock.

RDo not insert foreign objects into the product.

Doing so may cause a short circuit or overheating, which may result in a fire or

electric shock.

RDo not expose the product to water or other liquids.

Doing so may cause a short circuit, generation of heat, overheating, or rupture,

which may result in a fire, electric shock or injury.

RIf the product gets wet, immediately unplug the AC adaptor and AC plug,

remove the unit, and then contact your technical support representative.

RDo not touch the product, AC adaptor or cables during lightning storms if

the product is connected to an AC adaptor.

There is a remote chance of electric shock.

RImmediately stop using the product if any of the following occurs.

–Product is damaged

–Water or foreign objects enter the product

–Product emits smoke

–Product emits unusual smell or sound

–Product becomes unusually hot

Continuing use may result in fire or electric shock. Immediately unplug the AC

plug, remove the unit, and then contact your technical support representative.

RDo not do anything that may damage the AC cord, the AC plug, or the AC

adaptor.

Do not damage or modify the cord, place it near hot tools, bend, twist, or

pull it forcefully, place heavy objects on it, or bundle it tightly.

Continuing to use a damaged cord, plug or AC adaptor may result in a fire, or

electric shock.

RContact your technical support representative if any malfunction occurs.

RClean dust and other debris on the AC plug regularly.

If dust or other debris accumulates on the plug, humidity, etc. may cause a

defect in the insulation, which may result in a fire.

RPull the plug, and wipe it with a dry cloth.

RPull the plug if the product is not being used for a long period of time.

RInsert the AC plug completely.

If the plug is not inserted completely, fire due to overheating or electric shock

may result.

RDo not use a damaged plug or loose AC outlet.

RDo not pull or insert the AC plug if your hands are wet.

Electric shock may result.

RDo not connect the AC adaptor to a power source other than a standard

household AC outlet.

Otherwise, a fire due to overheating may result. Connecting to a DC/AC

converter (inverter) may damage the AC adaptor. On an airplane, only connect

the AC adaptor/charger to an AC outlet specifically approved for such use.

RDo not allow conductive materials such as metal objects to touch the bus

connector terminals. Also, do not touch the terminals with your hands.

This may result in a fire, burn, or electric shock.

RDo not leave the product in areas with a high concentration of moisture,

steam, dust, oily vapors, etc.

Foreign material that enters the product may cause a fire or electric shock.

RDo not move the product while the AC plug is connected.

The AC cord may be damaged, resulting in a fire or electric shock.

RIf the AC cord is damaged, unplug the AC plug immediately.

RDo not subject the AC adaptor to any strong impact.

Using the AC adaptor after a strong impact such as being dropped may result in

a fire or electric shock.

RContact your technical support representative if any malfunction occurs.

RMake sure not to charge the product when it is used with a wet unit.

This may result in a fire or electric shock.

RDo not leave the product in extremely high temperature environments for

an extended period.

Leaving the product where it will be exposed to extremely high temperatures,

such as near fire or in direct sunlight, may deform the product or cause damage

or malfunction to its internal components. Using the product in these conditions

may cause short circuit, insulation defects, etc., which may in turn cause a fire or

electric shock.

RDo not place the product on an unstable surface.

The product may drop, resulting in an injury.

RUse only specified AC adaptors and the supplied AC cord.

Use of unspecified AC adaptors or AC cords may result in a fire or electric shock.

RWhen cleaning the product or if you will not use it for a long period of

time, unplug the AC plug for your safety.

Failure to do so may result in a fire or electric shock.

RHold the plug when unplugging the AC plug.

Pulling on the cord may damage the cord, resulting in a fire or electric shock.

RUse the LAN port for connecting to specified network equipment only.

Connecting to unspecified equipment could result in a fire or electric shock.

Connect only 1000BASE-T, 100BASE-TX or 10BASE-T equipment to the LAN

port. Do not attempt to connect phone cables or other types of cables.

Handling and maintenance

Obey the following to ensure proper use and operation of this product.

Operating environment

RPlace the product on a flat, stable surface.

RDo not leave the product in places under direct sunlight or around heating

appliances.

RUsing this product continuously in a hot environment will shorten the product life.

Avoid use in these types of environments.

Handling cautions

RDo not drop the product or subject it to impacts. Doing so may cause

malfunctions or damage.

RIf the unit you are using with the product is wet, remove the water by wiping off

the moisture, and thoroughly dry the unit before docking it in the product.

Maintenance

RAlways disconnect the AC adaptor before cleaning the product.

RClean the product with a soft, dry cloth.

RDo not clean the product with solvents such as benzene, thinner, alcohol, or

kitchen detergent because they may affect the surface of the product.

RIf the bus connector terminals are dirty, battery charging may not be possible.

Clean them with a soft, dry cloth.

RBe careful not to bend the bus connector terminals.

Description of parts

APower indicator ( )

Green, lit: Power on

Off: Power off

BLAN indicator

Green, flashing: LAN connection established / LAN communicating

Off: LAN connection not established

CBus connector terminals

Supplies power to the unit and connects the unit to the LAN ports.

DDC input jack

Allows you to connect an AC adaptor to the product.

ELAN port

FPositioning hole

Allows you to hook and fix the product onto studs for installation on flat bases.

Explanation of graphical symbol on nameplate

: Alternating current

: Direct current

Inhaltsverzeichnis

Sprachen:

Andere Panasonic Akkuladegerät Handbücher

Panasonic

Panasonic EY0110-U1 Bedienungsanleitung

Panasonic

Panasonic FZ-VCBN131A3 Bedienungsanleitung

Panasonic

Panasonic FZ-VEH5L1AA Bedienungsanleitung

Panasonic

Panasonic EY-0110 Bedienungsanleitung

Panasonic

Panasonic EY0L81 Bedienungsanleitung

Panasonic

Panasonic Attune WX-Z3040 Bedienungsanleitung

Panasonic

Panasonic FZ-VEH1L1AA Bedienungsanleitung

Panasonic

Panasonic QE-QL101 Bedienungsanleitung

Panasonic

Panasonic CF-VCBAX11EA Bedienungsanleitung

Panasonic

Panasonic EY0901 - 12V AUTO/MARINE CHRG Bedienungsanleitung

Panasonic

Panasonic FZ-VCB551 Series Bedienungsanleitung

Panasonic

Panasonic FZ-VCBT11 Bedienungsanleitung

Panasonic

Panasonic EY0225 Bedienungsanleitung

Panasonic

Panasonic BQ-CC17 Bedienungsanleitung

Panasonic

Panasonic BQ-CC51E Bedienungsanleitung

Panasonic

Panasonic FZ-VEH5T1AA Bedienungsanleitung

Panasonic

Panasonic EY0L10-X8 Bedienungsanleitung

Panasonic

Panasonic EY0L80-U1 Bedienungsanleitung

Panasonic

Panasonic FZ-VCBN131 Bedienungsanleitung

Panasonic

Panasonic FZ-VCBT131 Bedienungsanleitung

Panasonic

Panasonic FZ-VEBX121 Bedienungsanleitung

Panasonic

Panasonic FZ-VCBAG11U Bedienungsanleitung

Panasonic

Panasonic BQ-CC16 Bedienungsanleitung

Panasonic

Panasonic CF-VCBP12 Bedienungsanleitung

Beliebte Akkuladegerät Handbücher anderer Marken

AA Portable Power Corp

AA Portable Power Corp Universal Smart Charger Bedienungsanleitung

Enelion

Enelion Vertica Bedienungsanleitung

RCA

RCA CHU6 Bedienungsanleitung

ANSMANN

ANSMANN ALCT 6/24-10 Bedienungsanleitung

Hitachi

Hitachi UC 18YRSL Fehlerbehebungshandbuch

Olympus

Olympus B-20 LPC Bedienungsanleitung

Exibel

Exibel ZH1708143 Bedienungsanleitung

Lenmar

Lenmar Mach 1 Bedienungsanleitung

CTEK

CTEK MXS 5.0 Bedienungsanleitung

ABB

ABB HT842379 Bedienungsanleitung

Nitecore

Nitecore Superb Charger SC4 Bedienungsanleitung

Renogy

Renogy RBC2125DS-21W Bedienungsanleitung

Braun

Braun BWC02M Bedienungsanleitung

CTEK

CTEK MXS 3.6 Bedienungsanleitung

Black & Decker

Black & Decker BDV090 Bedienungsanleitung

Trinity

Trinity DPD Bedienungsanleitung

Hulkman

Hulkman Sigma 1 Bedienungsanleitung

IKEA

IKEA koppla Bedienungsanleitung