Panasonic FZ-VEBX121 Bedienungsanleitung

Operating Instructions

Nous vous remercions d’avoir acheté un produit

Panasonic.

Veuillez lire ce document attentivement avant

d’utiliser le produit et conservez-le dans un endroit

sûr pour pouvoir vous y reporter ultérieurement.

Instructions d’utilisation

Bedienungsanleitung Vielen Dank, dass Sie sich für den Kauf dieses

Panasonic-Produkts entschieden haben.

Lesen Sie vor der Verwendung des Produkts dieses

Dokument sorgfältig und bewahren Sie es zum

späteren Nachschlagen an einem sicheren Ort auf.

Thank you for purchasing a Panasonic product.

Please read this document carefully before using

the product and keep this document in a safe place

for future reference.

取扱説明書保証書付き（日本国内向け）

●取扱説明書をよくお読みのうえ、正しく安全にお使いください。

●ご使用前に「安全上のご注意」（35ページ）を必ずお読みください。

●保証書は「お買い上げ日・販売店名」などの記入を確かめ、

取扱説明書とともに大切に保管してください。

FRANÇAIS 日本語DEUTSCHENGLISH

4-Bay Cradle

Cradle für 4 Akkus

Station d’accueil multi appareils (4 baies)

クレードル（4連式）

Model No.

FZ-VEBX121

PGQX1766XBJ1 C1114-3128Printed in Japan

For U.S.A.

Federal Communications Commission Radio Frequency

Interference Statement

Note:

RThis equipment has been tested and found to comply with the limits for a Class

B digital device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following

measures:

– Reorient or relocate the receiving antenna.

– Increase the separation between the equipment and receiver.

– Connect the equipment into an outlet on a circuit different from that to which

the receiver is connected.

– Consult the Panasonic Service Center or an experienced radio/TV technician

for help.

Warning:

RTo assure continued FCC emission limit compliance, use only shielded interface

cables when connecting to computer or peripheral devices. Any changes or

modifications not expressly approved by the party responsible for compliance

could void the user’s authority to operate this equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions:

1. This device may not cause harmful interference, and

2. This device must accept any interference received, including interference that

may cause undesired operation.

Responsible party

Panasonic Corporation of North America

Two Riverfront Plaza, Newark, NJ 07102, USA

Support contact: http://www.panasonic.com/contactinfo

For Europe

Declaration of Conformity (DoC)

"Hereby, Panasonic declares that this 4-Bay Cradle is in

compliance with the essential requirements and other relevant

provisions of EU Council Directives."

Authorised Representative:

Panasonic Testing Centre

Panasonic Marketing Europe GmbH

Winsbergring 15, 22525 Hamburg, Germany

Disposal of Old Equipment

Only for European Union and countries with recycling

systems

This symbol on the products, packaging, and/or accompanying

documents means that used electrical and electronic products must

not be mixed with general household waste.

For proper treatment, recovery and recycling of old products, please

take them to applicable collection points in accordance with your

national legislation.

By disposing of them correctly, you will help to save valuable

resources and prevent any potential negative effects on human

health and the environment. For more information about collection

and recycling, please contact your local authority.

Penalties may be applicable for incorrect disposal of this waste, in

accordance with national legislation.

Interface Cable

RUse of an interface cable longer than 3 m is not recommended.

To ensure Compliance to the EMC Directive, shielded LAN cables shall be used.

Ecodesign information

Ecodesign information under EU Regulation (EC) No.1275/2008 amended by (EU)

Regulation No.801/2013. From 1 January 2015.

please visit here: www.ptc.panasonic.eu

click [Downloads] ® Energy related products information (Public)

Power consumption in networked standby and guidance are mentioned in the web

site above.

For UK

For your safety, please read the following text carefully.

This appliance is supplied with a molded three pin mains plug for your safety and

convenience.

A 3 ampere fuse is fitted in this plug.

Should the fuse need to be replaced please ensure that the replacement fuse has

a rating of 3 ampere and that it is approved by ASTA or BSI to BS1362.

Check for the ASTA mark

A S A

or the BSI mark on the body of the fuse.

If the plug contains a removable fuse cover you must ensure that it is refitted when

the fuse is replaced.

If you lose the fuse cover the plug must not be used until a replacement cover is

obtained. A replacement fuse cover can be purchased from your local dealer.

If the fitted molded plug is unsuitable for the socket outlet in your home then the

fuse should be removed and the plug cut off and disposed of safely.

There is a danger of severe electrical shock if the cut off plug is inserted into any

13-ampere socket.

How to replace the fuse

The location of the fuse differs according to the type of AC mains plug (figures A

and B).

Confirm the AC mains plug fitted and follow the instructions below. Illustrations may

differ from actual AC mains plug.

Open the fuse cover with a screwdriver and replace the fuse and close or attach

the fuse cover.

Figure A Figure B

Fuse cover

For Canada

FOR USE WITH MODEL NO. : CF-AA5713A

India Only

Declaration of Conformity with the requirements of the E-Waste (Management)

Rules

The Product is in conformity with the requirements of the reduction of hazardous

substances of the E-Waste Rules.

The content of hazardous substance with the exemption of the applications listed in

SCHEDULE II of the E-waste Rules:

1. Lead (Pb) – not over 0.1 % by weight;

2. Cadmium (Cd) – not over 0.01 % by weight;

3. Mercury (Hg) – not over 0.1 % by weight;

4. Hexavalent chromium (Cr6+) – not over 0.1 % by weight;

5. Polybrominated biphenyls (PBBs) – not over 0.1 % by weight;

6. Polybrominated diphenyl ethers (PBDEs) – not over 0.1 % by weight.

For the purpose of recycling to facilitate effective utilization of

resources, please return this product to a nearby authorized

collection center, registered dismantler or recycler, or Panasonic

service center when disposing of this product.

Please see the Panasonic website for further information on

collection centers, etc. , or call the toll-free number below.

Website:

http://www.panasonic.com/in/corporate/sustainability/

panasonic-india-i-recycle-program.html

Service helpline: 1800 103 1333 or 1800 108 1333

Contents

Introduction page 6

Safety precautions page 7

Handling cautions page 9

Description of parts page 10

Connections Page 11

Docking and removing the unit Page 12

Troubleshooting page 13

Specifications page 13

Introduction

This product is designed for use with the Panasonic FZ-X1 and FZ-E1 series

(hereinafter referred to as "the unit").

Main features*1

The following features can be used for up to four units simultaneously.

– Charge a unit

– Connect USB devices via the USB ports

– Connect to a network via the LAN ports

*1 Available features may vary depending on the unit model. For the latest

information, refer to the latest Operating Instructions on the following web site.

http://pc-dl.panasonic.co.jp/itn/manual/menu_en.html

Compatible batteries (included with the unit and available as an accessory)

RFZ-VZSUX100J

Included accessories

RAC Adaptor (Model number CF-AA5713A) x 1

RAC Cord x 1

ROperating Instructions (this document) x 1

Note:

RSome illustrations are simplified to help your understanding and may look

different from the actual product.

Safety precautions

RDo not disassemble or modify this product.

Short-circuit or overheating may result, which could lead to fire or electric shock.

RDo not insert foreign objects into this product.

This may cause the battery to short circuit or overheat, which may result in fire

or electric shock.

RUse only specified AC adaptors.

Use of unspecified AC adaptors may result in overheating, fire, or rupture.

RUse only specified batteries.

Use of unspecified batteries may result in electrolyte leakage, overheating, or

rupture.

RStop using this product if any of the following occurs.

– This product emits smoke, unusual sound, or unusual smell

– Water or foreign object enters this product

– This product is damaged

– This product becomes unusually hot

Failure to do so may result in fire or electric shock. Disconnect this product from

the power supply, remove the unit, and then contact your technical support

representative for support or repair.

RDo not touch this product during lightning storms.

There is a remote chance of electric shock.

RDo not expose this product to water or other liquids.

Doing so may cause a short circuit, generation of heat, overheating, or rupture,

which may result in a fire, electric shocks, and/or injury.

RClean dust and other debris on the AC plug regularly.

If dust or other debris accumulates on the plug, humidity, etc. may cause a

defect in the insulation, which may result in a fire.

RPull the plug, and wipe it with a dry cloth. Pull the plug if this product is not

being used for a long period of time.

RDo not do anything that may damage the AC cord, the AC plug, or the AC

adaptor.

Do not damage or modify the cord, place it near hot tools, bend, twist, or pull it

forcefully, place heavy objects on it, or bundle it tightly.

Continuing to use a damaged cord may result in fire, short circuit, or electric

shock.

RDo not pull or insert the AC plug if your hands are wet.

Electric shock may result.

RDo not connect the AC adaptor to a power source other than a standard

household AC outlet.

Otherwise, a fire due to overheating may result. Connecting to a DC/AC

converter (inverter) may damage the AC adaptor. On an airplane, only connect

the AC adaptor/charger to an AC outlet specifically approved for such use.

RInsert the AC plug completely.

If the plug is not inserted completely, fire due to overheating or electric shock

may result.

RDo not use a damaged plug or loose AC outlet.

RWhen using this product, do not expose your skin to the surface of the AC

adaptor for a prolonged period.

Generated heat can cause low-temperature burns.

RDo not place this product on an unstable surface.

This product may drop, resulting in injury.

RDo not leave this product in extremely high temperature environments for

an extended period.

Leaving this product where it will be exposed to extremely high temperatures,

such as near fire or in direct sunlight, may deform this product or cause damage

or malfunction to its internal components. Using this product in these conditions

may cause short circuit, insulation defects, etc., which may in turn cause fire or

electric shock.

RDo not leave this product in areas with a high concentration of moisture,

steam, dust, oily vapors, etc.

Foreign material that enters this product may cause fire or electric shock.

RHold the plug when unplugging the AC plug.

Pulling on the cord may damage the cord, resulting in a fire or electric shock.

RUse the LAN port for connecting to specified network equipment only.

Connecting to unspecified equipment could result in fire or electric shock.

Connect only 100BASE-TX or 10BASE-T equipment to the LAN port. Do not

attempt to connect phone cables or other types of cables.

RDo not move this product while the AC plug is connected.

The AC cord may be damaged, resulting in fire or electric shock.

RIf the AC cord is damaged, unplug the AC plug immediately.

RDo not subject the AC adaptor to any strong impact.

Using the AC adaptor after a strong impact such as being dropped may result in

electric shock, short circuit, or fire.

RContact your technical support representative for support or repair.

Handling cautions

Obey the following to ensure proper use and operation of this product.

Operating environment

RIf the unit you are using with this product is wet, wipe off the moisture before

docking the unit in this product.

RThe charging times will vary depending on the operating environment.

RCharge the battery in environments with an ambient temperature of 10 °C to

35 °C (50 °F to 95 °F).

RUsing this product continuously in a hot environment will shorten the product life.

Avoid use in these types of environments.

RSome peripheral devices may not function properly in cold or hot environments.

Check the operational environment rating of any peripheral devices used with

this product.

RPlace this product on a flat, stable surface.

RDo not place this product on its sides or upside down.

RDo not block this product’s ventilation opening.

Drop impacts and damage

RThis product is a delicate apparatus. Be sure to handle it with care.

RDo not drop this product or subject it to impacts.

Cleaning

RAlways disconnect the AC adaptor before cleaning this product.

RClean this product with a soft, dry cloth.

RDo not use thinner, benzene, wax, petroleum-based liquids, soap, powdered

cleansers, hot water, chemical cleaning cloths, etc.

RIf dust or oil has accumulated on the bus connector terminals, battery charging

may not be possible. Clean it with a soft, dry cloth.

RBe careful not to bend the bus connector terminals.

Miscellaneous

RDo not touch the bus connector terminals.

RDo not allow conductive metallic materials such as coins or paper clips to touch

the bus connector terminals.

RThe AC adaptor is used as the main disconnect device. Ensure that the AC

outlet is installed near the product and is easily accessible.

Description of parts

ARelease button

Press this button to release the unit before removing it.

BBus connector terminals

Supplies power to the unit, and link the unit to the USB ports and to the LAN

ports.

CVentilation opening

DDC input jack

Allows you to connect an AC adaptor to this product.

EPower switch

Powers on this product.

FLAN port

GUSB port

HPower indicator

Green, lit: Power on

Off: Power off

Explanation of graphical symbol on nameplate

: Alternating current

: Direct current

Inhaltsverzeichnis

Sprachen:

Andere Panasonic Akkuladegerät Handbücher

Panasonic

Panasonic EY0L80 Bedienungsanleitung

Panasonic

Panasonic FZ-VCBX111 Bedienungsanleitung

Panasonic

Panasonic Lumix DMW-BTC14 Series Bedienungsanleitung

Panasonic

Panasonic EY0L10 Bedienungsanleitung

Panasonic

Panasonic TY-TCG20 Bedienungsanleitung

Panasonic

Panasonic CF-VCBTB3W Bedienungsanleitung

Panasonic

Panasonic Lumix DMW-BTC13 Bedienungsanleitung

Panasonic

Panasonic EY-0214 Bedienungsanleitung

Panasonic

Panasonic EY-0110 Bedienungsanleitung

Panasonic

Panasonic OL82B Bedienungsanleitung

Panasonic

Panasonic BQ-CC16 Bedienungsanleitung

Panasonic

Panasonic FZ-VEBN121 Bedienungsanleitung

Panasonic

Panasonic FZ-VEH1L1AA Bedienungsanleitung

Panasonic

Panasonic Li-ion EY0L82 Bedienungsanleitung

Panasonic

Panasonic FZ-VCBM11U Bedienungsanleitung

Panasonic

Panasonic EY0901 - 12V AUTO/MARINE CHRG Bedienungsanleitung

Panasonic

Panasonic FZ-VEBN141 Bedienungsanleitung

Panasonic

Panasonic EY0110-X8 Bedienungsanleitung

Panasonic

Panasonic EY0L81 Bedienungsanleitung

Panasonic

Panasonic BQ-CC17 Bedienungsanleitung

Panasonic

Panasonic BQ-CC51E Bedienungsanleitung

Panasonic

Panasonic FZ-VCH5T1AA Bedienungsanleitung

Panasonic

Panasonic CF-VCB201 Bedienungsanleitung

Panasonic

Panasonic QE-TS101AA Bedienungsanleitung

Beliebte Akkuladegerät Handbücher anderer Marken

AA Portable Power Corp

AA Portable Power Corp Universal Smart Charger Bedienungsanleitung

Enelion

Enelion Vertica Bedienungsanleitung

RCA

RCA CHU6 Bedienungsanleitung

ANSMANN

ANSMANN ALCT 6/24-10 Bedienungsanleitung

Hitachi

Hitachi UC 18YRSL Fehlerbehebungshandbuch

Olympus

Olympus B-20 LPC Bedienungsanleitung

Exibel

Exibel ZH1708143 Bedienungsanleitung

Lenmar

Lenmar Mach 1 Bedienungsanleitung

CTEK

CTEK MXS 5.0 Bedienungsanleitung

ABB

ABB HT842379 Bedienungsanleitung

Nitecore

Nitecore Superb Charger SC4 Bedienungsanleitung

Renogy

Renogy RBC2125DS-21W Bedienungsanleitung

Braun

Braun BWC02M Bedienungsanleitung

CTEK

CTEK MXS 3.6 Bedienungsanleitung

Black & Decker

Black & Decker BDV090 Bedienungsanleitung

Trinity

Trinity DPD Bedienungsanleitung

Hulkman

Hulkman Sigma 1 Bedienungsanleitung

IKEA

IKEA koppla Bedienungsanleitung