Panasonic WX-SZ200P Bedienungsanleitung

Before attempting to connect or operate this product, please read these instructions

carefully and save this manual for future use.

The model number is abbreviated in some descriptions in this manual.

Operating Instructions

Included Installation Instructions

Charger

Model No. WX-SZ200P

ENGLISHFRANÇAIS

Safety precautions

The lightning flash with

arrowhead symbol, within an

equilateral triangle, is intended

to alert the user to the presence

of uninsulated "dangerous

voltage" within the product's

enclosure that may be of

sufficient magnitude to

constitute a risk of electric shock

to persons.

The exclamation point within an

equilateral triangle is intended to

alert the user to the presence of

important operating and

maintenance (servicing)

instructions in the literature

accompanying the appliance.

WARNING:

󱾁To prevent fire or electric shock hazard,

do not expose this apparatus to rain or

moisture.

󱾁The apparatus should not be exposed

to dripping or splashing and no objects

filled with liquids, such as vases,

should be placed on the apparatus.

󱾁The mains plug or an appliance coupler

shall remain readily operable.

󱾁This device complies with Part 15 of

the FCC Rules and Innovation, Science

and Economic Development Canada’s

licence-exempt RSS(s). Operation is

subject to the following two conditions:

(1) This device may not cause harmful

interference, and (2) this device must

accept any interference received,

including interference that may cause

undesired operation.

The model number and serial number of

this product may be found on the surface

of the unit.

You should note the model number and

serial number of this unit in the space

provided and retain this book as a

permanent record of your purchase to aid

identification in the event of theft.

Model No. ________________________

Serial No. ________________________

For U.S.A.

ENGLISH

NOTE: This equipment has been tested

and found to comply with the limits for a

Class A digital device, pursuant to part 15

of the FCC Rules. These limits are

designed to provide reasonable protection

against harmful interference when the

equipment is operated in a commercial

environment. This equipment generates,

uses, and can radiate radio frequency

energy and, if not installed and used in

accordance with the instruction manual,

may cause harmful interference to radio

communications. Operation of this

equipment in a residential area is likely to

cause harmful interference in which case

the user will be required to correct the

interference at his own expense.

For U.S.A.

FCC Caution:

Changes or modifications not expressly

approved by the party responsible for

compliance could void the user's authority

to operate the equipment.

For U.S.A.

Supplier’s Declaration of

conformity

Trade Name: Panasonic

Model No.: WX-SZ200P

Responsible Party:

Panasonic Corporation of North America

Two Riverfront Plaza, Newark, NJ

07102-5490

Support Contact: 1-800-491-9986

[email protected]

For U.S.A.

CAN ICES-3(A)/NMB-3(A)

For Canada

CAUTION:

󱾁ONLY CONNECT 12 V CLASS 2

POWER SUPPLY (UL 1310/CSA 223)

or LIMITED POWER SOURCE (IEC/

EN/UL/CSA 60950-1).

For use only with power supply

Manufacturer , Panasonic Corporation

Model , PNLV6508

Descriptions of graphic symbols

This symbol indicates an direct

current (DC).

Safety precautions

IMPORTANT SAFETY INSTRUCTIONS

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings. Install in accordance with the manufacturer's

instructions.

8) Do not install near any heat sources such as radiators, heat registers, stoves, or other

apparatus (including amplifiers) that produce heat.

9) Protect the power cord from being walked on or pinched particularly at plugs,

convenience receptacles, and the point where they exit from the apparatus.

10) Only use attachments/accessories specified by the manufacturer.

11) Use only with the cart, stand, tripod, bracket, or table specified by the

manufacturer, or sold with the apparatus. When a cart is used, use

caution when moving the cart/apparatus combination to avoid injury from

tip-over.

12) Unplug this apparatus during lightning storms or when unused for long

periods of time.

13) Refer all servicing to qualified service personnel. Servicing is required when the

apparatus has been damaged in any way, such as power-supply cord or plug is

damaged, liquid has been spilled or objects have fallen into the apparatus, the

apparatus has been exposed to rain or moisture, does not operate normally, or has

been dropped.

ENGLISH

Product overview

This product is a charger to be used with wireless microphones (WX-ST200P or

WX-ST400P, both sold separately).

󱾀It uses inductive charging, without any direct contact points.

󱾀It can charge up to two wireless microphones at once.

Limitation of liability

THIS PUBLICATION IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND,

EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED

WARRANTIES OF MERCHANTABILITY, FITNESS FOR ANY PARTICULAR PURPOSE,

OR NON-INFRINGEMENT OF THE THIRD PARTY’S RIGHT. THIS PUBLICATION COULD

INCLUDE TECHNICAL INACCURACIES OR TYPOGRAPHICAL ERRORS. CHANGES

ARE ADDED TO THE INFORMATION HEREIN, AT ANY TIME, FOR THE

IMPROVEMENTS OF THIS PUBLICATION AND/OR THE CORRESPONDING

PRODUCT(S).

Disclaimer of Warranty

IN NO EVENT SHALL Panasonic Corporation BE LIABLE TO ANY PARTY OR ANY

PERSON, EXCEPT FOR REPLACEMENT OR REASONABLE MAINTENANCE OF THE

PRODUCT, FOR THE CASES, INCLUDING BUT NOT LIMITED TO BELOW:

① ANY LOSS OR DAMAGE, INCLUDING WITHOUT LIMITATION, DIRECT OR

INDIRECT, SPECIAL, CONSEQUENTIAL OR EXEMPLARY, ARISING OUT OF OR

RELATING TO THE PRODUCT;

② ANY INCONVENIENCE, LOSS, OR DAMAGE CAUSED BY INAPPROPRIATE USE OR

NEGLIGENT OPERATION OF THE USER;

③ ALL MALFUNCTIONS OR TROUBLES FROM UNAUTHORIZED DISASSEMBLY,

REPAIR OR MODIFICATION OF THE PRODUCT BY THE USER, REGARDLESS OF

THE CAUSE OF THE MALFUNCTION OR TROUBLE;

④ ANY PROBLEM CAUSING FAILED SIGNAL TRANSMISSION RESULTING IN

CONSEQUENTIAL INCONVENIENCE, LOSS OR DAMAGE, ARISING OUT OF

CAUSES SUCH AS SYSTEM MALFUNCTION, FAULT, SET UP OR INSTALLATION.

⑤ ANY PROBLEM, CONSEQUENTIAL INCONVENIENCE, OR LOSS OR DAMAGE,

ARISING OUT OF THE SYSTEM COMBINED BY THE DEVICES OF THIRD PARTY.

Safety precautions

Abbreviations

This manual uses the following abbreviations.

󱾀“Charger (WX-SZ200P)” is referred to as “charger”, “this product” or “the product”.

󱾀“Wireless Microphone (WX-ST200P or WX-ST400P, both sold separately)” are referred

to as “microphone”.

All information on separately-sold products contained in this manual is up-to-date as of

June 2019. Refer to a retailer for the latest information.

ENGLISH

Table of contents

Safety precautions ……………………… 2

Product overview ………………………… 5

Limitation of liability ……………………… 5

Disclaimer of Warranty ………………… 5

Abbreviations …………………………… 6

Precautions ……………………………… 8

Usage precautions ……………………… 10

Parts and their names ………………… 11

Installation ……………………………… 13

Installation precautions ………………… 13

AC adaptor connection………………… 15

Charging ………………………………… 16

Dimensions ……………………………… 19

Troubleshooting ………………………… 20

Specifications …………………………… 22

Standard accessories …………………… 22

Precautions

Plug the power plug all the way in

An improperly plugged power plug may lead to electric shocks, overheating, and fires.

󱾀Do not use damaged power plugs or loose power sockets.

Directly grab the plug to remove the power cable from the socket

Failing to do so may damage the cord and lead to fire or electric shocks.

Regularly remove dust from the electric plug

The insulation on a dusty plug may fail when it is subject to elements such as humidity,

thus leading to fire or electric shocks.

󱾀Remove the power cord and clean it with a dry cloth.

If the product shows any abnormality, immediately stop using it

If the product shows abnormalities such as smoke or an unusual smell, continuing to use it

may pose a fire hazard.

󱾀Immediately remove the power cord and contact the retailer.

Do not attempt to repair or wire the product while it is turned ON

It may lead to fire or electric shock.

Do not use near flammable gases

Doing so may lead to explosions and injuries.

Do not install the product where there is a risk of damage from seawater or

corrosive gases

This may cause the mounting unit to deteriorate, leading to accidents and injuries.

Do not place on unstable surfaces

The product may fall leading to accidents or injuries.

Only use the included AC adaptor (unified polarity plug)

Different AC adaptors may have different polarizations, resulting in smoke or fires.

Do not use where there is a risk of exceeding the maximum recommended

wattage for the socket or the wiring, and only use 120 V current

Overloading multi-outlet extension cords could result in overheating and fires.

Do not let foreign substances into the product

Water or metals entering the product may lead to fires or electric shocks.

󱾀Immediately remove the power cord and contact the retailer.

Avoid damaging the power cord and power plug

(by breaking them, tampering with them, bringing them near heat sources,

bending them excessively, twisting them, pulling on them, placing heavy

objects on them, tying them, etc.)

Using a damaged power cord or power plug may cause electric shocks, short circuits, or

fires.

󱾀Entrust the repair of the power cord and power plug to a retailer.

ENGLISH

Do not perform the installation and wiring work during a thunderstorm

It may lead to fire or electric shock.

Do not insert or pull the power plug with wet hands

Failing to do so may cause electric shocks.

Do not attempt to disassemble or remodel the product

It may lead to fire or electric shock.

Do not spill any liquid

It may lead to fire or electric shock.

󱾀Immediately remove the power cord and contact the retailer.

Do not place containers full of water or other liquids on or near the product

If wet, the product may lead to fire or electric shocks.

󱾀Immediately remove the power cord and contact the retailer.

Entrust installation operations to a retailer

The installation operations needed to install this product require skill and experience. They

involve a risk of injury to people and damage to things.

󱾀Always ask a retailer to do this.

Turn the product OFF before performing maintenance

It may lead to injury.

Do not pull on cables and other components

It may lead to injury.

Do not damage the cables

Placing heavy objects on the cables or squeezing them in tight places will damage them,

which could cause injuries.

Do not install at places exposed to large amount of humidity and/or dust

It may lead to injury.

Do not cover the ventilation holes

Doing so may cause overheating resulting in fires.

Other than the aforementioned “Precautions”, make sure to follow the points below.

This product is intended for indoor use only

󱾀It cannot be used outdoors.

Avoid exposing the product to direct sunlight for extended periods of time, and do not install it

near air conditioners or heaters. Failing to do so may lead to damage to the shape and color of

the product, and may cause it to malfunction. Also avoid exposure to water droplets and bubbles.

Use this product with care

󱾀This product contains delicate components which may be damaged by improper use or

storage.

󱾀Repair or replace any damaged components.

The operating temperature and humidity ranges are

󱾀Between 5 °C (41 °F) and 35°C (95 °F) and under 90% humidity. The charger may not

function outside of these ranges.

Charging

󱾀Remove the microphones from the charger once charging is complete.

󱾀Both the microphones and the charger heat up during charging, but this is not due to a

malfunction.

󱾀Batteries which are being used for the first time or batteries which have not been used

for a long time (more than three months) may not be completely recharged in just one

cycle, resulting in less usable time for the microphones. This phenomenon is

characteristic of the rechargeable batteries. The battery runtime may be recovered to the

normal level by completely charging and then depleting (by using the microphone) the

batteries two or three times.

Power specifications

󱾀The charger uses AC 120 V (60 Hz) power. Connect the charger to an enough capacity

power source.

When not using for an extended period of time

󱾀Remove the power cord from the power socket.

During thunderstorms

󱾀Do not insert microphones into the charger. Doing so may cause electric shocks.

Maintenance

󱾀Turn OFF the power and clean the product with a dry cloth.

󱾀Do not use volatile chemicals such as benzene or paint thinner.

󱾀When using chemically treated cloths, carefully read the included instructions.

Usage precautions

Inhaltsverzeichnis

Sprachen:

Andere Panasonic Akkuladegerät Handbücher

Panasonic

Panasonic EY0230 Bedienungsanleitung

Panasonic

Panasonic EY0L11B57 Bedienungsanleitung

Panasonic

Panasonic FZ-VCBM11U Bedienungsanleitung

Panasonic

Panasonic CF-VCBRT1 Bedienungsanleitung

Panasonic

Panasonic CF-VCBTB1W Bedienungsanleitung

Panasonic

Panasonic CF-VCB331 Series Bedienungsanleitung

Panasonic

Panasonic FZ-VCBN131A3 Bedienungsanleitung

Panasonic

Panasonic FZ-VCBAG11U Bedienungsanleitung

Panasonic

Panasonic EY-0214 Bedienungsanleitung

Panasonic

Panasonic CF-VCBTBB2W Bedienungsanleitung

Panasonic

Panasonic CF-VCBTB2W Bedienungsanleitung

Panasonic

Panasonic QE-QL201 Bedienungsanleitung

Panasonic

Panasonic EY0L80 Bedienungsanleitung

Panasonic

Panasonic EY-0110 Bedienungsanleitung

Panasonic

Panasonic BQ-CC16 Bedienungsanleitung

Panasonic

Panasonic CF-VCB201 Bedienungsanleitung

Panasonic

Panasonic EY0L11 Bedienungsanleitung

Panasonic

Panasonic BQ-CC50E Bedienungsanleitung

Panasonic

Panasonic BQ-CC17 Bedienungsanleitung

Panasonic

Panasonic FZ-VCBG21 Series Bedienungsanleitung

Panasonic

Panasonic EY0225 Bedienungsanleitung

Panasonic

Panasonic EY0005 Bedienungsanleitung

Panasonic

Panasonic BQ-CC55A Bedienungsanleitung

Panasonic

Panasonic FZ-VEH5L1AA Bedienungsanleitung

Beliebte Akkuladegerät Handbücher anderer Marken

AA Portable Power Corp

AA Portable Power Corp Universal Smart Charger Bedienungsanleitung

Enelion

Enelion Vertica Bedienungsanleitung

RCA

RCA CHU6 Bedienungsanleitung

ANSMANN

ANSMANN ALCT 6/24-10 Bedienungsanleitung

Hitachi

Hitachi UC 18YRSL Fehlerbehebungshandbuch

Olympus

Olympus B-20 LPC Bedienungsanleitung

Exibel

Exibel ZH1708143 Bedienungsanleitung

Lenmar

Lenmar Mach 1 Bedienungsanleitung

CTEK

CTEK MXS 5.0 Bedienungsanleitung

ABB

ABB HT842379 Bedienungsanleitung

Nitecore

Nitecore Superb Charger SC4 Bedienungsanleitung

Renogy

Renogy RBC2125DS-21W Bedienungsanleitung

Braun

Braun BWC02M Bedienungsanleitung

CTEK

CTEK MXS 3.6 Bedienungsanleitung

Black & Decker

Black & Decker BDV090 Bedienungsanleitung

Trinity

Trinity DPD Bedienungsanleitung

Hulkman

Hulkman Sigma 1 Bedienungsanleitung

IKEA

IKEA koppla Bedienungsanleitung