Panasonic AJ-YBX200G Bedienungsanleitung

AVC-Intra Codec Board/ AVC-Intra Codec Baugruppe

Carte Codec AVC-Intra / Scheda Codec AVC-Intra

Placa de Códecs de AVC-Intra

AVC-Intra コーデックボード

Operating Instructions/Bedienungsanleitung

Mode d’emploi/Istruzioni per l’uso

Instrucciones de funcionamiento

取扱説明書

F0707T0 -F @

Printed in Japan

VQT1K80

Model No. AJ-YBX200G

Before operating this product, please read the instructions carefully and save this

manual for future use.

Bitte lesen Sie vor Inbetriebnahme dieses Produkts die Anleitungen sorgfältig durch

und bewahren Sie dieses Handbuch für spätere Verwendung auf.

Avant de vous servir de ce produit, veuillez lire attentivement les instructions et

enregistrer ce manuel pour une utilisation ultérieure.

Prima di utilizzare questo prodotto, leggere attentamente le istruzioni di questo

manuale e conservarlo per riferimento futuro.

Antes de poner este producto en funcionamiento, lea atentamente las instrucciones

y conserve este manual para uso futuro.

このたびは、パナソニック製品をお買い上げいただき、まことにありがとうございます。

_取扱説明書をよくお読みの上、正しく安全にお使いください。

_保証書は、｢お買い上げ日・販売店名｣などの記入を確かめ、取扱説明書とともに大切に保管

してください。

ENGLISHDEUTSCHFRANÇAISITALIANOESPAÑOL

日

本

語

00.AJ-YBX200G(VQT1K80).book 1 ページ２００７年７月６日　金曜日　午後７時４０分

E-1

This product is licensed under the AVC patent portfolio license for the personal and non-commercial

use of a consumer to (i) encode video in compliance with the AVC Standard (“AVC Video”) and/or (ii)

decode AVC Video that was encoded by a consumer engaged in a personal and non-commercial

activity and/or was obtained from a video provider licensed to provide AVC Video. No license is

granted or shall be implied for any other use. Additional information may be obtained from MPEG

LA, LLC. See http://www.mpegla.com.

CAUTION:

These servicing instructions are for use by qualified service personnel only. To reduce the risk of fire or

electric shock do not perform any servicing other than that contained in the operating instructions

unless you are qualified to do so.

00.AJ-YBX200G(VQT1K80).book 1 ページ２００７年７月６日　金曜日　午後７時４０分

E-2

ENGLISH

Caution

zDo not touch this product with wet hands.

zDo not drop this product or subject it to strong shock.

zAvoid touching the product components and board pattern. (Follow these precautions to protect

against damage from electrostatic shock.)

Overview

The AJ-YBX200G is an AVC-Intra codec board for the AJ-HPX 2000/2100 memory card camera

recorders and an AJ-HPM100 memory card portable recorder/player.

When recording and playback of the AVC-Intra does not work, even when this board is correctly

installed, firmware may need to be updated for the main body. For the latest information regarding

firmware, visit the P2 Support Desk at the following Web sites.

English: https://eww.pavc.panasonic.co.jp/pro-av/

Features

The new AVC-Intra codec is supported by installing this product. With Intra-frame compression

technology is based on the latest motion picture compression format, the H.264 standard, to achieve

high image quality, high compression ratio, and high editing accuracy of HD images.

The AVC-Intra codec of this product supports the following two systems.

zHigh image quality supporting full-bit HD: AVC-Intra100

zCan be operated at a low rate and low cost: AVC-Intra50

Supported models

Memory card camera recorder: AJ-HPX2000/2100

Memory card portable recorder/player: AJ-HPM100

Bundled items

2.6 mm screws a4

3.0 mm screws a2

00.AJ-YBX200G(VQT1K80).book 2 ページ２００７年７月６日　金曜日　午後７時４０分

E-3

Installation in AJ-HPX2000/2100

1Unscrew the two screws from the AJ-

YBX200G to remove the bracket.

2Be sure that the power of the AJ-HPX2000/

2100 is turned off.

3Unscrew the six screws on the left side of

the AJ-HPX2000/2100 (on the left as

viewed from the front) to remove the side

panel.

4Unlock the two parts to disconnect the two

flexible cables, and then remove the No.5

board.

5Disconnect the cable from the No.5 board

removed in Step 4. In this operation, the

cable may become disconnected if pulled,

so remove it while holding the connector.

CAUTION:

These servicing instructions are for use by qualified service personnel only. To reduce the risk of fire

or electric shock do not perform any servicing other than as directed in the operating instructions

unless you are qualified to do so.

Screws

Bracket

Screws

Unlock

Flexible

Cables

No. 5

board

Slot

Cable

Connector

00.AJ-YBX200G(VQT1K80).book 3 ページ２００７年７月６日　金曜日　午後７時４０分

E-4

ENGLISH

6Place the AJ-YBX200G into the terminal of

the board in Step 5and fix it by using the

four 2.6 mm screws.

7Reconnect the cable removed in Step 5as

it was originally.

8Reinsert the No.5 board into its original

position. In this operation, allow the cable

connected in Step 7to run along the slot of

the No.5 board. (See Figure 5 ) Insert the

flexible cables removed in Step 4into the

original positions.

9Return the side panel to the original

position and secure it with the screws. In

this operation, ensure that the cable

disconnected in Step 5is not caught in the

slot.

If the flexible cables are not locked or the

board is inserted at a slant, the camera

recorder may have trouble recording.

2.6 mm

screws

00.AJ-YBX200G(VQT1K80).book 4 ページ２００７年７月６日　金曜日　午後７時４０分

E-5

Setting AJ-HPX2000/2100

When recording with the AJ-HPX2000/2100

using the AVC-Intra codec, settings are adjusted

on the <SYSTEM MODE> screen in SYSTEM

SETTING of the setup menu.

To adjust the settings, see the operation manual

of the AJ-HPX2000/2100.

<Notes>

zWhen switching items in SYSTEM MODE, turn

off the power of the main body and then turn it

on again.

zDuring playback, the format is automatically

identified. However, clips with a different

SYSTEM MODE cannot be played.

Setting menu

When this product is equipped with the AJ-

HPX2000/2100, the following setup menu

becomes available.

SYSTEM MODE screen in SYSTEM SETTING

DIAGNOSTIC 2 screen in MAINTENANCE

Error message

By Equipping this product with the AJ-HPX2000/

2100 adds the following error code display.

When an error occurs for any reason, the

following error code is displayed in the display

window.

Instructions for use

zInput and output with IEEE 1394 cannot be

performed during playback and recording of

the AVC-Intra.

zClips played at 23.98P or 29.97P frame rate

recorded with the camera recorder are pulled

down to 1080/59.94i or 720/59.94P for output.

Clips played at 25P frame rate recorded with

the camera recorder are pulled down to 1080/

50i or 720/50P for output.

zText memos of clips that cannot be played,

such as those with a different SYSTEM

MODE, cannot be displayed as thumbnails.

Recording format

Settings for the main

SYSTEM

MODE REC MODE

AVC-

Intra 100

1080/59.94i 1080-59.94i AVC-I 100

720/59.94P 720-59.94P

AVC-

Intra 50

1080/59.94i 1080-59.94i AVC-I 50

720/59.94P 720-59.94P

AVC-

Intra 100

1080/50i 1080-50i AVC-I 100

720/50P 720-50P

AVC-

Intra 50

1080/50i 1080-50i AVC-I 50

720/50P 720-50P

Item/

Data

storage

Variable

range Remarks

REC MODE HD mode

(1080i):

DVCPRO HD

AVC-I 50

AVC-I 100

HD mode

(720P):

DVCPRO HD

DVC HD (N)

AVC-I 50

AVC-I 100

Select the recording mode.

DVCPRO HD:

Record with the DVCPRO

HD format.

DVC HD (N):

Record in the Native

mode of DVCPRO HD.

AVC-I 50:

Record in AVC-I 50

format.

AVC-I 100:

Record in AVC-I 100

format.

Item/

Data

storage

Variable

range Remarks

AVC-I SOFT

Display the control software

version of the AVC-I board

(optional).

AVC-I FPGA

Display the FPGA program

version of the AVC-I board

(optional).

Code No. Details

E-39 Initialization defect on the AVC-I

optional board

00.AJ-YBX200G(VQT1K80).book 5 ページ２００７年７月６日　金曜日　午後７時４０分

E-6

ENGLISH

Installation into the AJ-HPM100

1Unscrew the two screws from the AJ-

YBX200G to remove heat sink 1.

2Unscrew the three screws and nuts from

the AJ-YBX200G to remove heat sink 2.

3Remove the cooling sheets if they remain

on the AJ-YBX200G after removing heat

sinks 1 and 2.

4Make sure that the power of the AJ-

HPM100 is turned off.

5Unscrew the 7 screws from the AJ-

HPM100 to remove the top panel.

CAUTION:

These servicing instructions are for use by qualified service personnel only. To reduce the risk of fire

or electric shock, do not perform any servicing other than as directed in the operating instructions

unless you are qualified to do so.

Screws

(black)

Heat sink 1

Heat

sink 2 Screws

(black)

Cooling

sheet

Cooling sheet

Screws

00.AJ-YBX200G(VQT1K80).book 6 ページ２００７年７月６日　金曜日　午後７時４０分

E-7

6Place the AJ-YBX200G into the terminal of

the AJ-HPM100 running along the slot of

AJ-HPM100, and secure it using the two

3.0 mm screws.

7Replace the top panel, and screw it on.

Settings for the AJ-HPM100

When recording with the AJ-HPM100 using the AVC-Intra codec, settings are adjusted in the setup

menu.

See the operation manual of the main body for instructions on how to configure the setup menu.

During playback, the format is automatically identified. However, clips with a different system

frequency cannot be played.

Setup menu

When this product is equipped with the AJ-HPM100, the following setup menu becomes available.

is the factory setting mode.

Screws

Slot

Recording format Settings of the setup menu

25: SYSTEM FREQ 020: SYS FORMAT 025: REC FMT (HD)

AVC-Intra 100 1080/59.94i

59.94

1080i AVC100

720/59.94P 720p

AVC-Intra 50 1080/59.94i 1080i AVC50

720/59.94P 720p

AVC-Intra 100 1080/50i

1080i AVC100

720/50P 720p

AVC-Intra 50 1080/50i 1080i AVC50

720/50P 720p

Item Setting Setting details and description of outline function

FR No. SUPER DISP. FR No. SUPER DISP.

025 REC FMT(HD) 0000

0001

0002

DVCPRO

AVC50

AVC100

Select the recording format when menu No. 020 SYS FORMAT

is set to 1080i or 720p.

0: Select DVCPRO HD (100 Mbps).

1: Select AVC-Intra 50.

2: Select AVC-Intra 100.

00.AJ-YBX200G(VQT1K80).book 7 ページ２００７年７月６日　金曜日　午後７時４０分

E-8

ENGLISH

Error message

When this product is equipped with the AJ-HPM100, the following error message is added.

Instructions for use

zInput and output with IEEE 1394 cannot be performed during playback and recording of the AVC-

Intra.

zClips played at 23.98P or 29.97P frame rate recorded with the camera recorder are pulled down to

1080/59.94i or 720/59.94P for output. Clips played at 25P frame rate recorded with the camera

recorder are pulled down to 1080/50i or 720/50P for output.

zText memos of clips that cannot be played, such as those with a different system frequency, cannot

be displayed as thumbnails.

Specifications

AVC-Intra Codec Board

Dimensions (W aH aD):

115 mm a84 mm a13 mm

(4-9/16 inches a3-5/16 inches a

12-1/2 inches)

(excluding bracket and heat sinks)

Weight :

80 g (0.18 lb)

(excluding bracket and heat sinks)

VIDEO

Video recording formats :

AVC-Intra100, AVC-Intra50

Frequency range:

Y: 74.1758 MHz (59.94 Hz)

PB/PR: 37.0879 MHz (59.94 Hz)

Y: 74.25 MHz (50 Hz)

PB/PR: 37.175 MHz (50 Hz)

Quantization:

10 bits

Compression technology :

H.264/AVC intra profile Weight and dimentions when shown are

approximately. Specifications are subject to

change without notice.

Error Details Operation

Number Message

E-39 CONFIG

ERROR

Displayed when the AVC-I optional board cannot be initialized.

Because failure of the optional board is possible, contact the

store where you purchased it.

The AJ-HPM100 stops

working.

00.AJ-YBX200G(VQT1K80).book 8 ページ２００７年７月６日　金曜日　午後７時４０分

G-1

Dieses Produkt wird unter der “AVC Patent Portfolio License” für die persönliche und nicht

kommerzielle Nutzung durch einen Endverbraucher lizenziert. Im Rahmen dieser Lizenz darf der

Endverbraucher (i) Videomaterial nach dem AVC-Standard (“AVC Video”) codieren und/oder (ii) AVC-

Videomaterial decodieren, das von einem Endverbraucher im Rahmen persönlicher und nicht

kommerzieller Aktivitäten codiert wurde, und/oder AVC-Videomaterial decodieren, das von einem

Videoanbieter bezogen wurde, der für die Bereitstellung von AVC-Videomaterial lizenziert wurde. Für

alle anderen Verwendungen wird weder eine Lizenz erteilt, noch darf diese impliziert werden. Weitere

Informationen erhalten Sie bei MPEG LA, LLC. Siehe http://www.mpegla.com.

VORSICHT:

Diese Wartungsanleitung ist nur für qualifiziertes Wartungspersonal vorgesehen. Um die Gefahr von

elektrischen Schlägen zu reduzieren, sollten Sie keine anderen Wartungsarbeiten außer den in der

Bedienungsanleitung enthaltenen durchführen, wenn Sie nicht dafür qualifiziert sind.

00.AJ-YBX200G(VQT1K80).book 1 ページ２００７年７月６日　金曜日　午後７時４０分

Inhaltsverzeichnis

Sprachen:

Andere Panasonic Kamerazubehör Handbücher

Panasonic

Panasonic H-H014A Bedienungsanleitung

Panasonic

Panasonic WX-SB100E Bedienungsanleitung

Panasonic

Panasonic VIDEOALARM PODV7CPNS Bedienungsanleitung

Panasonic

Panasonic AW-PB304 Bedienungsanleitung

Panasonic

Panasonic WV7260 - CCTV ACCESSORIES Bedienungsanleitung

Panasonic

Panasonic WV-LXY18C4 Bedienungsanleitung

Panasonic

Panasonic BB-HGW700A - Network Camera Router Bedienungsanleitung

Panasonic

Panasonic WV7110A - MONITOR Bedienungsanleitung

Panasonic

Panasonic VIDEOALARM PODV7CWNS/PODV7CPNS Bedienungsanleitung

Panasonic

Panasonic HHR380A Bedienungsanleitung

Panasonic

Panasonic PUM8 Bedienungsanleitung

Panasonic

Panasonic LC-R061R3P Bedienungsanleitung

Panasonic

Panasonic AJ-VF15BP Bedienungsanleitung

Panasonic

Panasonic H-FS45150 Bedienungsanleitung

Panasonic

Panasonic DVCPRO AJ-CA901 Bedienungsanleitung

Panasonic

Panasonic AW-360C10 Bedienungsanleitung

Panasonic

Panasonic WVPS154 - CAMERA DRIVE UNIT Bedienungsanleitung

Panasonic

Panasonic POH1000 Bedienungsanleitung

Panasonic

Panasonic AK-HVF931AEA Bedienungsanleitung

Panasonic

Panasonic LUMIX DMW-BGS1 Bedienungsanleitung

Panasonic

Panasonic LC-P0612P Bedienungsanleitung

Panasonic

Panasonic AWPH300 - INDOOR PAN/TILT HEAD Bedienungsanleitung

Panasonic

Panasonic WVPH10 - CL CAMERA ACCESS Bedienungsanleitung

Panasonic

Panasonic Lumix H-ES045 Bedienungsanleitung

Beliebte Kamerazubehör Handbücher anderer Marken

Viltrox

Viltrox EF-NEX Montageanleitung

Calumet

Calumet 7100 Series CK7114 Bedienungsanleitung

Ropox

Ropox 4Single Series Bedienungsanleitung

Cambo

Cambo Wide DS Digital Series Betriebsanleitung

Samsung

Samsung SHG-120 Bedienungsanleitung

Ryobi

Ryobi BPL-1820 Bedienungsanleitung

Aegis

Aegis ABL-36020P Bedienungsanleitung

Pentax

Pentax Data Back Fc Bedienungsanleitung

Fantasea

Fantasea EyeGrabber F Series Bedienungsanleitung

Honeywell

Honeywell HDZ20HD Bedienungsanleitung

EGO

EGO BA1400T Bedienungsanleitung

Sima

Sima SRW-62 Bedienungsanleitung

Shape

Shape A7SSMKIT Bedienungsanleitung

Slide Kamera

Slide Kamera HST-2 Bedienungsanleitung

Power works

Power works 2902613 Bedienungsanleitung

SES

SES SE-2047-2 Bedienungsanleitung

Olympus

Olympus PT-EP05L Bedienungsanleitung

Starlite

Starlite OctoDome nxt Bedienungsanleitung