Panasonic AWPH300 - INDOOR PAN/TILT HEAD Bedienungsanleitung

Indoor Pan/Tilt Head

AW-PH300

Before attempting to connect or operate this product,

please read these instructions completely.



Warning:

Do not install this product near any object that burns easily.

In case of using a halogen lamp, installation of it near such

an object could cause a fire due to the heat generated by

the lamp.

This digital apparatus does not exceed the Class A limits for

radio noise emissions from digital apparatus set out in the

Radio Interference Regulations of the Canadian Department

of Communications.

WARNING:

TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOIS

TURE.

The lightning flash with arrowhead sym-

bol, within an equilateral triangle, is

intended to alert the user to the pres-

ence of uninsulated "dangerous voltage"

within the product's enclosure that may

be of sufficient magnitude to constitute a

risk of electric shock to persons.

The exclamation point within an equilat-

eral triangle is intended to alert the user

to the presence of important operating

and maintenance (servicing) instructions

in the literature accompanying the appli-

ance.

The serial number of this product may be found on the bot-

tom of the unit.

You should note the serial number of this unit in the space

provided and retain this book as a permanent record of your

purchase to aid identification in the event of theft.

Model No.

Serial No.

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO

NOT REMOVE COVER (OR BACK). NO USER SER-

VICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PER-

SONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

SA 1965

SA 1966

For U.S.A

For CANADA

-1-

CONTENTS

FEATURES .......................................................................................................................................................................................... 2

PRECAUTIONS ................................................................................................................................................................................... 3

MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS ............................................................................................................ 4

INSTALLATION ................................................................................................................................................................................... 6

SPECIFICATIONS ............................................................................................................................................................................... 21

ACCESSORIES ................................................................................................................................................................................... 22

-2-

FEATURES

• The AW-PH300 is a compact pan/tilt head capable of

tilting up to 95° up or 95° down and panning up to

300°. It is mounted upright or suspended.

• The pan/tilt head carries a camera and lenses for a

total weight of 4 kg.

• The pan/tilt head can be directly controlled using the

Pan/tilt Control Panel AW-RP301 or AW-RP305. (The

Control Panel cannot control the camera.)

• A camera and pan/tilt head can be directly controlled

using the Hybrid Control Panel AW-RP501.

• Up to five cameras with pan/tilt heads can be directly

controlled using the Multi-Hybrid Control Panel AW-

RP505 in combination with the Multiport Hub AW-

HB505.

• The pan/tilt head can be controlled from a personal

computer via an RS-232C. However, simultaneous

control with a personal computer and a control panel is

not possible.

• The pan/tilt head can also be controlled using a con-

tact type controller.

-3-

PRECAUTIONS

SW2SW1 SW3

Battery

• Avoid using the pan/tilt head in the kitchen or other

places full of steam and oil fume.

• The pan/tilt head has a maximum load capacity of 4kg.

Do not use it for a load over 4 kg.

• Do not install the pan/tilt head outdoors, or at a place

over 45°C, or at a cold place below −10°C.

Ambient humidity must be less than 90%.

• Mounting screws must be locally purchased because

they are not supplied.

Choose screws appropriate to the material of the

mounting place and the load on the pan/tilt head.

• Use only with AC Adaptor, Model AW-PS300.

• In handling the pan/tilt head, be sure to hold it by the

base.

Do not lift the pan/tilt head by the rotary part of it.

Otherwise, something may go wrong with the head.

• Do not turn the pan/tilt head by the rotary part of it.

Otherwise, something may go wrong with the head.

• Dropping the pan/tilt head or subjecting it to a strong

shock can cause a failure or an accident.

• Keep the pan/tilt head more than 1 meter away from

the monitors.

• The pan/tilt head uses a manganese dioxide lithium

battery (CR2032).

Be sure to remove the battery before disposing of the

pan/tilt head or the printed wiring boards in the head.

Be sure to dispose of a removed battery, or an old bat-

tery removed to be replaced, according to the applica-

ble provisions of law.

Do not dispose of it as ordinary trash.

The battery is located as shown in the figure below. To

remove the battery, refer to Battery Replacement

under the Replacement of Expendables at page 20.

Danger of explosion if battery is incorrectly replaced.

Replace only with same or equivalent type recommend-

ed by the manufacturer. Dispose of used battteries

according to the manufacturer`s instructions.

Caution

-4-

MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS

-5-

qTilting Arm (supplied)

This arm tilts the head.

wTilting Arm Fixing Screws (supplied)

4 screws are supplied to fasten the tilting arm.

eCamera Mounting Plate (supplied)

Used to fasten the camera.

rCamera Guide Pin

This pin sets the mounting direction of the camera.

tCamera Mounting Screw

This screw fastens the camera. (U 1/4”-20 UNC)

yPanning Head

The head rotates in panning directions.

uTally Indicators (2 pcs.)

A selection signal lights them red.

iCamera Connector Panel

To connect a camera and lens.

oBase

!0 Mounting Holes

There are 4 holes to mount the pan/tilt head.

!1 Wire Rod Mounting Hole

To pass a wire to prevent the pan/tilt head from falling.

!2 Control Connector Panel

To connect a Control Panel (AW-RP301, RP305, or

RP501) or the Multiport Hub (AW-HB505) and Pan/tilt

Head AC Adapter (AW-PS300)

!3 Side Blank Panel

A spare to be used in changing the mounting position

of Control Connector Panel !2

!4 Bottom Blank Panel

A spare to be used in changing the mounting position

of Control Connector Panel !2

-6-

Tilting Arm

Tilting Arm Fixing Screws

INSTALLATION

■Assembling the Pan/tilt Head

In handling the pan/tilt head, be sure to hold it by the

base.

●Installing the Tilting Arm

Fasten the Tilting Arm q(supplied) with the Tilting Arm

Fixing Screws w(supplied). The way of mounting the

arm differs depending on the direction of pan/tilt head

installation. (See the figure right.)

Note: Do not use other than the supplied tilting arm fix-

ing screws to fasten the tilting arm.

-7-

Camera Mounting Plate

Fixing Screw

Camera Guide Pin

Camera Mounting Screw position

Camera Mounting Plate

Pin position for

mounting upright

●Fastening the Camera Mounting Plate

To mount the pan/tilt head upright, pull out the Camera

Guide Pin rfrom the Camera Mounting Plate e,

which is packed together with the pan/tilt head, and

insert it into the hole shown in the figure below.

This is not necessary when mounting the pan/tilt head

suspended.

• Loosen the Camera Guide Pin rwith a screwdriv-

er and remove it.

• Insert the Camera Guide Pin rinto the hole

shown below and fasten it securely with a screw-

driver.

Fasten the Camera Mounting Plate eas shown in the

figure right.

The Camera Mounting Plate eand Camera Mounting

Plate Fixing Screws are packed together.

The position of the Camera Mounting Plate ediffers

depending on the camera and lens used.

It is recommended that the position of the Camera

Mounting Plate ebe so adjusted that the gravity cen-

ter of the camera and lens will be perpendicular to the

tilting center.

-8-

w q

q w

For Reference

Examples of screw positions on Camera Mounting Plate e

are shown below.

qExample of mounting position of camera WV-E550 or

AW-E560 and lens S18 (FUJINON) or lens YH18

(CANON)

wExample of mounting position of camera WV-E550 or

AW-E560 and lens S14 (FUJINON) or lens YH14

(CANON)

Andere Handbücher für AWPH300 - INDOOR PAN/TILT HEAD

Inhaltsverzeichnis

Andere Panasonic Kamerazubehör Handbücher

Panasonic

Panasonic A1 Security Cameras WV-CW4C Bedienungsanleitung

Panasonic

Panasonic PUM8 Bedienungsanleitung

Panasonic

Panasonic WV-Q116 Bedienungsanleitung

Panasonic

Panasonic AK-HDC931 Bedienungsanleitung

Panasonic

Panasonic WV-QEM500-W Bedienungsanleitung

Panasonic

Panasonic AWPH300 - INDOOR PAN/TILT HEAD Bedienungsanleitung

Panasonic

Panasonic AG-CVF15G Bedienungsanleitung

Panasonic

Panasonic Lumix H-ES045 Bedienungsanleitung

Panasonic

Panasonic LC-R063R4P Bedienungsanleitung

Panasonic

Panasonic Lumix DMW-MCFT1 Bedienungsanleitung

Panasonic

Panasonic VariCam AU-VSHL1G Bedienungsanleitung

Panasonic

Panasonic ET-DLE105 Bedienungsanleitung

Panasonic

Panasonic WV-7120D Bedienungsanleitung

Panasonic

Panasonic AK-HRP150 Bedienungsanleitung

Panasonic

Panasonic AG-HCK10 Bedienungsanleitung

Panasonic

Panasonic ML414RH/F9A Bedienungsanleitung

Panasonic

Panasonic AW-LZ17ST66G Bedienungsanleitung

Panasonic

Panasonic WVRM70 - ACCESSORY Bedienungsanleitung

Panasonic

Panasonic WV46KT - CCTV PRODUCTS Bedienungsanleitung

Panasonic

Panasonic HHR120AA Bedienungsanleitung

Panasonic

Panasonic AWPH600P - OUTDOOR PAN/TILT HEAD Bedienungsanleitung

Panasonic

Panasonic KX-HNP100C Bedienungsanleitung

Panasonic

Panasonic WV-CS1S Bedienungsanleitung

Panasonic

Panasonic AM-2PI Bedienungsanleitung

Beliebte Kamerazubehör Handbücher anderer Marken

Viltrox

Viltrox EF-NEX Montageanleitung

Calumet

Calumet 7100 Series CK7114 Bedienungsanleitung

Ropox

Ropox 4Single Series Bedienungsanleitung

Cambo

Cambo Wide DS Digital Series Betriebsanleitung

Samsung

Samsung SHG-120 Bedienungsanleitung

Ryobi

Ryobi BPL-1820 Bedienungsanleitung

Aegis

Aegis ABL-36020P Bedienungsanleitung

Fantasea

Fantasea EyeGrabber F Series Bedienungsanleitung

Honeywell

Honeywell HDZ20HD Bedienungsanleitung

EGO

EGO BA1400T Bedienungsanleitung

Sima

Sima SRW-62 Bedienungsanleitung

Shape

Shape A7SSMKIT Bedienungsanleitung

Slide Kamera

Slide Kamera HST-2 Bedienungsanleitung

Power works

Power works 2902613 Bedienungsanleitung

SES

SES SE-2047-2 Bedienungsanleitung

Starlite

Starlite OctoDome nxt Bedienungsanleitung

Custom Brackets

Custom Brackets Digital PRO-M Bedienungsanleitung

Vivo

Vivo MOUNT-LT01C Bedienungsanleitung