Panasonic Lumix H-ES200 Bedienungsanleitung

EGC

DVQX1304ZA

F1017KD0

Operating Instructions

INTERCHANGEABLE LENS FOR DIGITAL CAMERA

Model No. H-ES200

Please read these instructions carefully before using this product, and save this manual for future use.

until

2018/01/17

DVQX1304_E.book 1 ページ２０１７年１０月２０日　金曜日　午後５時５分

DVQX1304

Contents

Information for Your Safety................................ 2

Precautions...................................................... 3

Supplied Accessories ........................................ 4

Names and Functions of Components .............. 5

Attaching/Detaching the Lens............................ 6

Attaching/Removing the 1.4

Teleconverter

........... 7

Focus Preset Function....................................... 8

Using the Tripod Mount ..................................... 9

Cautions for Use.............................................. 10

Troubleshooting............................................. 10

Specifications ..................................................11

Limited Warranty (ONLY FOR AUSTRALIA)... 12

Information for Your Safety

Keep the unit as far away as possible from electromagnetic

equipment (such as microwave ovens, TVs, video games,

radio transmitters, high-voltage lines etc.).

• Do not use the camera near cell phones because doing so may

result in noise adversely affecting the pictures and sound.

• If the camera is adversely affected by electromagnetic

equipment and stops functioning properly, turn the camera

off and remove the battery and/or the connected AC

adaptor. Then reinsert the battery and/or reconnect the AC

adaptor and turn the camera on.

The lens can be used with a digital camera compatible with the

lens mount standard for the “Micro Four Thirds

System”.

• It cannot be mounted on the Four ThirdsTM mount

specification camera.

• The digital camera illustrations in these operating

instructions show DC-G9 as an example.

• The appearance and specifications of products described

in this manual may differ from the actual products you

have purchased due to later enhancements.

• Micro Four ThirdsTM and Micro Four Thirds Logo marks

are trademarks or registered trademarks of Olympus

Corporation, in Japan, the United States, the European

Union and other countries.

• Four Thirds

and Four Thirds Logo marks are trademarks or

registered trademarks of Olympus Corporation, in Japan, the

United States, the European Union and other countries.

• G MICRO SYSTEM is an interchangeable lens type digital

camera system of LUMIX based on a Micro Four Thirds

System standard.

• LEICA is a registered trademark of Leica Microsystems IR

GmbH. ELMARIT is a registered trademark of Leica

Camera AG. The LEICA DG lenses are manufactured

using measurement instruments and quality assurance

systems that have been certified by Leica Camera AG

based on the company’s quality standards.

• Other names of systems and products mentioned in these

instructions are usually the registered trademarks or

trademarks of the manufacturers who developed the

system or product concerned.

DVQX1304_E.book 2 ページ２０１７年１０月２０日　金曜日　午後５時５分

DVQX1304

-If you see this symbol-

∫Lens Care

• This lens has a dust-proof and splash-proof construction.

When using it, please be careful of the following.

If the lens is not working properly, consult the dealer or

your nearest Service Centre.

– Please attach the lens to a dust-proof and splash-proof

digital camera. The lens is not designed to be dust-proof

and splash-proof when attached to a digital camera

without dust-proofing and splash-proofing.

– When attaching or removing the lens, be careful so that

foreign materials such as sand, dust, and water droplets

do not adhere to or enter the lens mount rubber, contact

points, digital camera and lens.

– This lens is not waterproof and cannot be used to record

underwater. For splash-proofing, the lens is constructed

to resist the entry of water. If splashes of water etc. do

adhere to the lens, wipe after use with a soft dry cloth.

• To improve the dust-proofing and splash-proofing of this

lens, a lens mount rubber is used in the mounting portion.

After changing the lens a number of times, you may find

that the lens mount rubber has marked the mount portion

of the digital camera body, which does not affect its

performance.

For information on changing the lens mount rubber,

contact your nearest Service Centre.

• Do not press the lens with excessive force.

• When there is dirt (water, oil, and fingerprints, etc.) on the

surface of the lens, the picture may be affected. Lightly

wipe the surface of the lens with a soft, dry cloth before

and after taking pictures.

Disposal of Old Equipment

Only for European Union and countries with recycling

systems

This symbol on the products, packaging, and/or

accompanying documents means that used

electrical and electronic products must not be

mixed with general household waste.

For proper treatment, recovery and recycling of

old products, please take them to applicable collection

points in accordance with your national legislation.

By disposing of them correctly, you will help to save

valuable resources and prevent any potential negative

effects on human health and the environment.

For more information about collection and recycling,

please contact your local municipality.

Penalties may be applicable for incorrect disposal of this

waste, in accordance with national legislation.

Precautions

ENGLISH

DVQX1304_E.book 3 ページ２０１７年１０月２０日　金曜日　午後５時５分

DVQX1304

• To prevent dust and other

particles from accumulating

on or entering the lens,

attach the lens rear cap

when the lens is not in use.

• To protect the lens contact

points 1, do not place the

lens with its mount surface

facing down. In addition, do

not allow the lens contact

points to become dirty.

∫About Condensation (Fogging of the Lens)

• Condensation occurs when the ambient temperature or

humidity changes. Please be careful, as it may cause the

lens to become dirty and lead to mould and

malfunctioning.

• If condensation occurs, turn the power off and leave it for about

two hours. Once the camera acclimatizes to the surrounding

temperature the condensation will go away naturally.

Supplied Accessories

Product numbers correct as of November 2017. These may

be subject to change.

¢1 The 1.4k Teleconverter (DMW-TC14) is scheduled to

be sold as an optional accessory.

¢2 It is available for purchase as a package that includes a

lens cap and a lens rear cap.

• The lens rear cap and lens cap are attached to the

interchangeable lens and 1.4k Teleconverter at the time

of purchase.

1Lens Pouch

2Lens Hood

3Lens Cap

4Lens Rear Cap

5External tripod mount

61.4k Teleconverter

7Lens Pouch

8Lens Cap

9Lens Rear Cap

SFC0360 DVZE1018Z

2134

1GE1Z253Z VFC4605

SYQ0680

DVXE1027Z

VFC4460

7689

DVGX1115Z VFC4605

DMW-TC14 1

DVQX1304_E.book 4 ページ２０１７年１０月２０日　金曜日　午後５時５分

DVQX1304

Names and Functions of Components

1Lens surface

2Aperture ring

Rotate this to adjust the aperture value.

• If you set the camera to Aperture-Priority AE Mode or Manual

Exposure Mode, the aperture value of the ring will be enabled.

• If you set the position of the aperture ring to [A], the

aperture value of the camera will be enabled.

3Focus ring

Rotate to focus when taking pictures with manual focus (MF).

4Focusing distance range selector switch

[FULL]: It can focus between the ranges of 1.15 m

(3.8 feet) to ¶.

[3m-¶]:It can focus between the ranges of 3.0 m

(9.8 feet) to ¶. The speed of focusing with

auto focus will be faster.

5Focus button (P8)

6Focus selector switch (P8)

7Tripod mount (P9)

8Orientation locking knob (P9)

9[AF/MF] switch

This allows you to switch between Auto Focus (AF) and

Manual Focus (MF).

• When either the [AF/MF] switch of the lens or the setting of

the camera is set to [MF], Manual Focus (MF) is enabled.

10 O.I.S. switch

When the lens is attached to the camera the stabiliser

function is set to activate if the O.I.S. switch is set to [ON].

• We recommend setting the O.I.S. switch to [OFF] when

using a tripod.

11 Lens fitting mark

12 Lens mount rubber

13 Contact points

1 4 5 102 3 76 8 9

DVQX1304_E.book 5 ページ２０１７年１０月２０日　金曜日　午後５時５分

DVQX1304

Note

• Operational sound may be recorded when Auto Focus is

operated while recording a motion picture. If the sound

bothers you, we recommend performing recording with a

function such as Manual Focus (MF) to lock the focus.

• If you set the O.I.S. to [ON] when recording a motion

picture, operating sounds may be recorded. If they

become bothersome, we recommend setting the O.I.S.

switch to [OFF] and mounting the camera on a tripod.

∫1.4k Teleconverter

Attaching/Detaching the Lens

For information on how to attach and remove the lens,

refer to the operating instructions for your digital

camera.

• Before attaching or detaching the lens, check that the

digital camera is turned off.

• Before attaching the lens to the

digital camera, remove the lens

rear cap. (1, 2)

• To prevent dust and other particles

from accumulating on or entering

the lens, be sure to attach the lens

cap/lens rear cap after detaching

the lens from the digital camera.

∫Attaching Filters

• If you use two or more filters at the same time, part of a

recorded image may darken.

• It is possible to attach the lens cap or the lens hood with

the filter already attached.

• It is not possible to attach a conversion lens or adaptor to

the lens surface and use it in combination with this lens.

Do not attach any items other than filters. Doing so may

result in lens damage.

∫Attaching the Lens Hood

Rotate the lens hood

screw in the direction of

the arrow to loosen it (

2 Insert the lens hood until

it stops (2).

3 Rotate the lens hood

screw in the direction of

the arrow to fasten the

lens hood securely (3).

1Fitting mark

2Lens release

button

3Lens fitting mark

4Contact points

Lens mount rubber

132 4 5

DVQX1304_E.book 6 ページ２０１７年１０月２０日　金曜日　午後５時５分

DVQX1304

Note

• When using the lens with the lens hood, check if the lens

hood screw has become loose.

• When taking pictures with the flash with the lens hood

attached, the lower portion of the screen may turn dark

and the control of the flash may be disabled because the

photo flash may be obscured by the lens hood. We

recommend detaching the lens hood.

• When carrying, the lens hood can

be temporarily attached in the

reverse direction.

• Do not carry the lens by holding

only the lens hood.

Attaching/Removing the

1.4kTeleconverter

• The teleconverter can be used in combination with

this lens (H-ES200). (As of November 2017)

• For the most up-to-date information on compatible lenses

other than this lens, check the Panasonic website.

• Do not attach any parts other than a compatible lens.

Doing so may damage the lens or teleconverter or

adversely affect its performance.

• Before attaching or removing the teleconverter, verify

that the digital camera is turned off.

• Remove the lens cap and the lens rear cap.

∫To attach the teleconverter

Align the fitting mark

on the teleconverter with

the lens fitting mark

the lens (

), and rotate the

teleconverter in the arrow

direction until a clicking

sound is heard. (

)

Align the lens fitting mark

on the teleconverter with

the lens fitting mark

the digital camera (

and

rotate the lens in the arrow

direction until a clicking

sound is heard. (

)

• When attaching the lens to the digital camera, do not

press the lens release button E and the lens release

button on the teleconverter.

∫To remove the teleconverter

While pressing and

holding the lens release

button

on the digital

camera, rotate the lens

fitted with the

teleconverter in the arrow

direction until it stops and

remove it (





 



DVQX1304_E.book 7 ページ２０１７年１０月２０日　金曜日　午後５時５分

DVQX1304

While pressing and

holding the lens release

button

on the

teleconverter, rotate the

teleconverter in the arrow

direction until it stops and

remove it (

Note

• When the teleconverter is mounted, the aperture will be

set to a value one step greater than the index value on the

aperture ring.

• When updating the lens firmware to the latest version,

remove the teleconverter before performing the update.

Focus Preset Function

You can call up a focus position stored in the memory of the

lens. In addition, the focus can be locked.

(To store a focus position in the lens memory)

Set the focus selector switch to [MEMORY] (

2Adjust the focus to the position you want to

store in the memory.

3Press the focus button (2) to store the focus

position in the memory.

• The focus position stored in the memory will remain in

effect until you store a new position in the memory.

(To call up the focus position stored in the memory)

4Set the focus selector switch to [CALL] (1).

5Press the focus button (2) to call up the focus

position stored in the memory.

• [MF] is temporarily enabled while the focus button is

pressed and held.

• Even when the focusing distance range selector switch is

set to [3m–¶], a focus position within the 3.0 m range can

be called up. If you release the focus button, however, the

focus position will move to the limit position (3.0 m).

• We recommend setting the focusing distance range

selector switch to [FULL] when using the focus preset

function.

∫Locking the focus

1Set the focus selector switch to [Fn] (1).

2Press the focus button (2).

• The focus is locked while the focus button is pressed and

held.

• You can also call up a function set on a digital camera that

supports the [Fn] function.



DVQX1304_E.book 8 ページ２０１７年１０月２０日　金曜日　午後５時５分

DVQX1304

Note

• Before removing the lens, verify that the digital camera is

turned off. If the lens is removed while the digital camera is

turned on, the focus position will not be stored in the

memory.

Using the Tripod Mount

When using a tripod, attach it to

the tripod mount of the lens.

• We recommend that you

avoid attaching the tripod to

the tripod mount of the digital

camera to prevent lens

damage that may occur when carrying the lens.

• In the following cases, before attaching a tripod, attach the

supplied external tripod mount to the lens:

– When the lens or digital camera comes in contact with

the tripod

– When a battery grip that comes in contact with the tripod

is used

∫Attaching the external tripod mount (supplied)

1 Insert the external tripod mount

attachment screw into the tripod mount

of the lens. (1)

2 Rotate the external tripod mount

attachment screw in the direction of the

arrows to fasten it firmly.

• Check that the external tripod mount attachment screw is

not loose before use.

• Do not strike or apply strong pressure to the external

tripod mount.

∫Changing the vertical/horizontal orientation

You can loosen the orientation locking knob (1) to rotate

the lens together with the digital camera (2).

This way, you can quickly switch between the vertical and

horizontal orientation while the tripod is in use.

• After changing the orientation, tighten the orientation

locking knob firmly and check that it is not loose.

DVQX1304_E.book 9 ページ２０１７年１０月２０日　金曜日　午後５時５分

DVQX1304

Cautions for Use

Take care not to drop or knock the lens. Also take care

not to put a lot of pressure on the lens.

• Take care not to drop the bag that you inserted the lens in

as it may strongly shock the lens. The camera may stop

operating normally and pictures may no longer be

recorded. Also, the lens may be damaged.

• When carrying the digital camera with the lens attached,

hold both the digital camera and the lens.

When using pesticides and other volatile substances around

the camera make sure that they do not get onto the lens.

• If such substances get onto the lens they can damage the

exterior case or cause the paint to peel.

Do not point the lens at the sun or other strong light

sources.

• This could cause the lens to collect an excessive amount

of light, resulting in fire and malfunction.

• Avoid using or storing the lens in any of the following

locations as this may cause problems in operation or

malfunctioning:

– In direct sunlight or on a beach in summer

– In locations with high temperatures and humidity levels or

where the changes in temperature and humidity are acute

– In locations with high concentrations of sand, dust or dirt

– Where there is fire

– Near heaters, air conditioners or humidifiers

– Where water may make the unit wet

– Where there is vibration

– Inside a vehicle

• Refer also to the operating instructions of the digital

camera.

• When the unit is not going to be used for a prolonged

period, we recommend storing with a desiccant (silica gel).

Failure to do so may result in performance failure caused

by mold, etc. It is recommended that you check the unit’s

operation prior to use.

• Do not leave the lens in contact with rubber or plastic

products for extended periods of time.

• Do not touch the lens contact point. Doing so can cause

failure of the unit.

• Do not disassemble or alter the unit.

Do not use benzine, thinner, alcohol or other similar

cleaning agents to clean the lens glass or exterior

cabinet.

• Using solvents can damage the lens or cause the paint to peel.

• Wipe off any dust or fingerprints with a soft, dry cloth.

• Use a dry, dust cloth to remove dirt and dust on the lens

mount rubber, focus ring, or aperture ring.

• Do not use a household detergent or a chemically treated

cloth.

When I turn on or off the camera or when I shake the

lens, I hear a sound, for example a rattling sound.

When I take pictures of a bright subject, such as

a subject outside, or when I take pictures with a

large aperture value, the lens makes a sound.

• This is the sound of lens or aperture movement and is not

a malfunction.

Troubleshooting

DVQX1304_E.book 10 ページ２０１７年１０月２０日　金曜日　午後５時５分

Andere Handbücher für Lumix H-ES200

Inhaltsverzeichnis

Sprachen:

Andere Panasonic Kameraobjektiv Handbücher

Panasonic

Panasonic Lumix S-R24105 Bedienungsanleitung

Panasonic

Panasonic H-VSO14140 Bedienungsanleitung

Panasonic

Panasonic H-HS043 Bedienungsanleitung

Panasonic

Panasonic ET-ELW22C Bedienungsanleitung

Panasonic

Panasonic Lumix DMW-STC14 Bedienungsanleitung

Panasonic

Panasonic Lumix H-FS014045 Bedienungsanleitung

Panasonic

Panasonic Lumix H-FS14140 Installationsanleitung

Panasonic

Panasonic Lumix H-ES12060 Bedienungsanleitung

Panasonic

Panasonic H-RS100400 Bedienungsanleitung

Panasonic

Panasonic H-FS12032K Bedienungsanleitung

Panasonic

Panasonic H-H025 Bedienungsanleitung

Panasonic

Panasonic Lumix H-FT012 Bedienungsanleitung

Panasonic

Panasonic Lumix H-FSA14140 Bedienungsanleitung

Panasonic

Panasonic WV-LA2R8C3B Bedienungsanleitung

Panasonic

Panasonic ET-ELW30 Bedienungsanleitung

Panasonic

Panasonic LUMIX H-F007014E Bedienungsanleitung

Panasonic

Panasonic AK-LZ20M85G Bedienungsanleitung

Panasonic

Panasonic Lumix DMC-G1KPP Bedienungsanleitung

Panasonic

Panasonic WV-LM6B2 Bedienungsanleitung

Panasonic

Panasonic DMWLWA52 Bedienungsanleitung

Panasonic

Panasonic 5025232847358 Bedienungsanleitung

Panasonic

Panasonic S-E70200 Bedienungsanleitung

Panasonic

Panasonic S-S35 Bedienungsanleitung

Panasonic

Panasonic H-HS030PP Bedienungsanleitung

Beliebte Kameraobjektiv Handbücher anderer Marken

THORLABS

THORLABS ELL15 Bedienungsanleitung

FUJICA

FUJICA ZC1000 Bedienungsanleitung

Tamron

Tamron A09 Handbuch

Sony

Sony SEL-55210 Bedienungsanleitung

Sony

Sony VCL-HG2037 Bedienungsanleitung

Honeywell

Honeywell HLM25V6F12 Bedienungsanleitung

Sony

Sony VCL-ST30 Bedienungsanleitung

Canon

Canon FD 35 - 70 mm Bedienungsanleitung

Sony

Sony SAL-85F14Z - 85mm f1.4 Carl Zeiss Planar T Coated Telephoto... Bedienungsanleitung

ARRI

ARRI Lenses Bedienungsanleitung

Olympus

Olympus M.Zuiko Digital ES 300mm f4.0 IS PRO Bedienungsanleitung

Sony

Sony VCL-DE07T Bedienungsanleitung

Canon

Canon FD Lens Handbuch

Tamron

Tamron A036 Bedienungsanleitung

Samsung

Samsung 20-50mm F3.5-5.6 ED II Bedienungsanleitung

Tamron

Tamron 272E Bedienungsanleitung

Sinar

Sinar Rolleiflex 6008 AF Bedienungsanleitung

Rokinon

Rokinon SP 85mm F1.2 Bedienungsanleitung