Panasonic AJ-PCD2GPJ Bedienungsanleitung

ENGLISHDEUTSCH

FRANÇAIS

ITALIANOESPAÑOL

日本語

Operating Instructions/Bedienungsanleitung

Mode d’emploi/Istruzioni per l’uso

Instrucciones de funcionamiento

取扱説明書

Memory Card Drive/Laufwerk für Speicherkarten

Lecteur de carte mémoire/Unità a schede di memoria

Unidad de transferencia de tarjeta de memoria

メモリーカードドライブ

Model No. AJ-PCD2G

FJ0210KT0 -PS D

Printed in Japan VQT2T35

Before operating this product, please read the instructions carefully and

save this manual for future use.

Bitte lesen Sie diese Bedienungsanleitung vor der Inbetriebnahme

dieses Produkts aufmerksam durch, und bewahren Sie sie für späteres

Nachschlagen auf.

Avant d’utiliser l’appareil, lire attentivement ce mode d’emploi, et le

conserver à des fins de référence ultérieure.

Prima di far funzionare questo prodotto, leggere attentamente le istruzioni

e conservare questo manuale per riferimenti futuri.

Antes de utilizar este producto, lea cuidadosamente las instrucciones y

guarde este manual por si tiene que utilizarlo en el futuro.

このたびは、パナソニック製品をお買い上げいただき、まことにありがとうございます。

● 取扱説明書をよくお読みのうえ、正しく安全にお使いください。

● ご使用前に「安全上のご注意」（J-2 ～ J-3 ページ）を必ずお読みください。

● 保証書は｢お買い上げ日・販売店名｣などの記入を確かめ、取扱説明書とともに大切

に保管してください。

保証書別添付

製造番号は、品質管理上重要なものです。製品本体と保証書の製造番号をお確かめください。

E-1

Read this rst!

WARNING:

● To reduce the risk of fire or electric shock, do not expose this equipment

to rain or moisture.

● To reduce the risk of fire or electric shock, keep this equipment away

from all liquids. Use and store only in locations which are not exposed

to the risk of dripping or splashing liquids, and do not place any liquid

containers on top of the equipment.

CAUTION:

In order to maintain adequate ventilation, do not install or place this unit in

a bookcase, built-in cabinet or any other confined space. To prevent risk of

electric shock or fire hazard due to overheating, ensure that curtains and

any other materials do not obstruct the ventilation.

CAUTION:

To reduce the risk of fire or electric shock and annoying interference, use

the recommended accessories only.

CAUTION:

Do not remove panel covers by unscrewing them.

To reduce the risk of electric shock, do not remove the covers. No user

serviceable parts inside.

Refer servicing to qualified service personnel.

indicates safety information.

EEE Yönetmeliğine Uygundur.

EEE Complies with Directive of Turkey.

The rating plate is on the underside of the unit.

E-2

ENGLISH

FCC NOTICE (USA)

Declaration of Conformity

Model Number: AJ-PCD2G

Trade Name: Panasonic

Responsible Party: Panasonic Corporation of North America

One Panasonic Way, Secaucus, NJ07094

Support contact: 1-800-524-1448

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1)This device may not cause harmful interference, and (2) this device must accept

any interference received, including interference that may cause undesired operation.

To assure continued compliance, follow the attached installation instructions and do

not make any unauthorized modifications.

Note:

This equipment has been tested and found to comply with the limits for a class B

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses, and can radiate radio frequency

energy, and if not installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined

by turning the equipment off and on, the user is encouraged to try to correct the

interference by one of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

The user may find the booklet “Something About Interference” available from FCC

local regional offices helpful.

Warning:

To assure continued FCC emission limit compliance, follow the attached installation

instructions and the user must use only shielded interface cables when connecting to

host computer or peripheral devices. Also, any unauthorized changes or modifications

to this equipment could void the user’s authority to operate this device.

NOTIFICATION (Canada)

This class B digital apparatus complies with Canadian ICES-003.

indicates safety information.

E-3

Software used by this product

This product contains software provided under the GNU General Public License

(GPL) and the GNU Lesser General Public License (LGPL). The user has the

right to obtain, change and redistribute the source code as he/she wishes.

For details on GPL and LGPL, refer to the files stored in the LDOC folder on the

supplied CD-ROM. (Note that this information is provided in the original (English

language) text.)

To obtain the source code, visit the following web site.

http://pro-av.panasonic.net/

Please do not make enquiries regarding the source code you obtain.

E-4

ENGLISH

Table of Contents

Read this first!............................................................................................ E-1

Before Use .................................................................................................. E-5

Overview ..................................................................................................... E-5

Features ...................................................................................................... E-5

Supplied Accessories (AJ-PCD2G) .......................................................... E-6

Operating Environment Required for Installation .................................. E-6

Parts and their Functions ......................................................................... E-7

Connecting the P2 Drive to a Personal Computer.................................. E-8

Removing the P2 Drive from a Personal Computer ............................... E-9

Inserting a P2 Card .................................................................................. E-10

Removing a P2 Card .................................................................................E-11

Write-protecting a P2 Card ......................................................................E-11

Installing a USB Driver for Windows ..................................................... E-12

Installing a USB Driver for Macintosh ................................................... E-12

Before Calling for Service ....................................................................... E-13

Specifications .......................................................................................... E-14

Microsoft, Windows and Windows Vista are trademarks of Microsoft

Corporation of the United States.

Macnintosh, Mac OS and PowerBook are trademarks of Apple Inc. of the

United States.

Other names of companies and products are trademarks or registered

trademarks of the respective companies.

● In these instructions, Microsoft® Windows®, Windows® 2000, Windows® XP

Professional, Windows Vista® Business, Windows Vista® Ultimate, Windows®

7 Professional and Windows® 7 Ultimate are given as “Windows”, “Windows

2000”, “Windows XP Professional”, “Windows Vista Business”, “Windows Vista

Ultimate”, “Windows 7 Professional” and “Windows 7 Ultimate” respectively.

● Similarly, in these instructions, Macintosh®, Mac® Pro, Mac OS® X and

PowerBook® are given as “Macintosh”, “Mac Pro”, “Mac OS X” and

“PowerBook” respectively.

E-5

Before Use

• While the AJ-PCD2G is connected to a computer, install the required drivers

from the CD-ROM.

Refer to the installation manual in the “Manuals” folder on the CD-ROM for

information on how to install the drivers for Windows.

Refer to “Installing a USB driver for Macintosh” on page E-12 in this manual for

information on how to install drivers for Macintosh.

• The AJ-PCD2G may become warm during use, but this is not a malfunction.

Overview

The AJ-PCD2G (referred to as “P2 drive” below) is a single-slot drive for reading

and writing P2 content on P2 cards (1 card at a time) when connected to a

Windows PC or Macintosh via USB 2.0 (two USB cable connections that provide

bus power).

The P2 drive is capable of making high-speed transfers of clip data shot with a

memory card camera-recorder for P2 cards to a personal computer (Windows/

Apple Macintosh).

This device supports not only the transferring and copying of clips recorded on P2

cards, but also direct editing.

Features

• Single-slot P2 card drive with USB 2.0 interface

• Light and compact construction makes it portable and ideal for field work with a

notebook PC

• Supports both Windows and Macintosh operating systems

• USB bus power eliminates need for AC adapter*1

*1: Two USB cables are required.

E-6

ENGLISH

Supplied Accessories (AJ-PCD2G)

USB cables (2) CD-ROM (1)

Operating Environment Required for

Installation

The host computer requires the following operating environment to operate the P2

drive.

USB 2.0 connectors: two or more

For one P2 drive, two USB 2.0 (Hi-Speed) connectors, i.e., SIGNAL (data transfer/

power supply) and POWER (power supply), are needed. Up to two P2 drives can

be connected to one personal computer.

E-7

Parts and their Functions

① ② ③ ④ ⑤

A Access indicator

Lights green during P2 card access.

◆ NOTE:

• Do not remove a P2 card during access. The file data could be corrupted or

the P2 card could be damaged.

The indicator blinks rapidly when the USB 2.0 connector (POWER) is not

connected. Refer to “Before Calling for Service” (page E-13).

B P2 Card slot

Insert a P2 card.

The P2 drive is designed for P2 cards and does not work with other cards.

C EJECT button

Press this button to remove a P2 card from the P2 drive.

D USB 2.0 connector (SIGNAL connector)

Use the supplied USB cables to connect this connector to a USB 2.0 port on a

personal computer to transfer data and to power the P2 drive from the computer.

E USB 2.0 connector (POWER connector)

Use the supplied USB cable to connect this connector to a USB 2.0 port on a

personal computer to power the P2 drive from the computer.

◆ NOTE:

• Do not use the P2 drive in an upright position. Otherwise malfunction or damage

to the P2 drive may occur.

E-8

ENGLISH

Connecting the P2 Drive to a Personal

Computer

Connect the supplied USB cables

to each USB 2.0 connector

(SIGNAL, POWER) on the P2 drive.

Connect the other end of each

USB cable to USB 2.0 ports on a

personal computer.

The access indicator blinks and then goes

out and a drive letter for the P2 drive

appears on the personal computer.

For the rst time you use the P2

drive, proceed with the USB driver

installation.

 Refer to “Installing a USB Driver for

Windows” (page E-12)

 Refer to “Installing a USB Driver for

Macintosh” (page E-12)

USB cables

• Use the supplied 1.0 m USB cables. If you lose the supplied USB cables,

purchase two 1.0 m or shorter USB cables (USB 2.0 compliant). The P2 drive

may not work with USB cables of different length.

• Do not transport the P2 drive with USB cables connected. The P2 drive could be

damaged.

USB cable connection

• Two USB cables are required to connect the P2 drive.

• When only the USB (SIGNAL) connector on the P2 drive is connected to

a personal computer, the corresponding driver letter appears, but the

content of an inserted P2 card will not appear. The access indicator will then

blink rapidly for two seconds and go off for one second. This status repeats.

• When only the (POWER) USB connector on the P2 drive is connected to a

personal computer, the corresponding drive letter does not appear.

■

Two USB cables are required to

connect the P2 drive.

Two USB cables are required to

connect the P2 drive.

E-9

Using a USB hub

• Use only self-powered USB hubs (self-powered hubs supply their own power via

an AC adapter). (A bus-powered USB hub may not work with this device.)

• Use USB 2.0 (Hi-Speed USB) hubs with this device. (A USB 1.1 hub may not

work with this device.)

Connecting two P2 drives in Windows XP and Windows Vista

Connect the USB 2.0 (SIGNAL) connectors on the two P2 drives directly to the

USB ports on the personal computer. If both of the P2 drives appear as “Panasonic

P2 Series USB Device” when you select “Safe Hardware Removal” in the task tray,

the device driver is applied. If one of the P2 drives appears as “USB Mass Storage

Device”, the device driver is not applied. In this case, refer to the installation

manual and install the device driver again.

If the problem persists after reinstallation, it is recommended to use only one P2

drive.

◆ NOTE:

• If the USB 2.0 (SIGNAL) connectors on the two P2 drives are connected to the

USB hub, the P2 drives may not be recognized, the device driver may not be

applied, and other problems may occur.

Removing the P2 Drive from a Personal

Computer

Windows XP and Windows Vista

Select “Safely Remove Hardware” in the task tray to stop “Panasonic P2 Series

USB Device” before disconnecting the two USB cables.

Windows 7

If a P2 card is inserted in the P2 drive, click the up arrow icon in the task tray,

select “Safely Remove Hardware and Eject Media”, select “Remove P2 drive”

before disconnecting the two USB cables.

When there is no P2 card in the drive, the USB cables can be removed without

the need for any computer operations.

■

Andere Handbücher für AJ-PCD2GPJ

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Panasonic Kartenleser Handbücher

Panasonic

Panasonic FZ-VSC402 Series Bedienungsanleitung

Panasonic

Panasonic au-xpd1 Bedienungsanleitung

Panasonic

Panasonic AJ-PCD2G Bedienungsanleitung

Panasonic

Panasonic FZ-VNF401 Series Bedienungsanleitung

Panasonic

Panasonic LP-ABR11 Bedienungsanleitung

Panasonic

Panasonic FZ-VNF551 Series Bedienungsanleitung

Panasonic

Panasonic UD-794D Bedienungsanleitung

Panasonic

Panasonic AJ-PG50 Bedienungsanleitung

Panasonic

Panasonic AGHPG10P - MEMORY CARD PORTABLE RECORDER Bedienungsanleitung

Panasonic

Panasonic AJ-PCD10E Bedienungsanleitung

Panasonic

Panasonic FZ-VGT551 Series Bedienungsanleitung

Panasonic

Panasonic BN-SDCMAB Bedienungsanleitung

Panasonic

Panasonic ZU-1870MA6T2 Bedienungsanleitung

Panasonic

Panasonic JT-R210CR-50 Bedienungsanleitung

Panasonic

Panasonic AJ-PCD35 Bedienungsanleitung

Panasonic

Panasonic FZ-VSDR55 Series Bedienungsanleitung

Panasonic

Panasonic AJ-PCD10P Bedienungsanleitung

Panasonic

Panasonic ZU-9PS Series Bedienungsanleitung

Panasonic

Panasonic au-xpd1 Bedienungsanleitung

Panasonic

Panasonic AJ-MPD1G Bedienungsanleitung

Panasonic

Panasonic FZ-VSC551 Series Bedienungsanleitung

Panasonic

Panasonic AJ-PCD35 Bedienungsanleitung

Panasonic

Panasonic CF-VCRU11U Bedienungsanleitung

Panasonic

Panasonic AJ-PCD20EJ Bedienungsanleitung

Beliebte Kartenleser Handbücher anderer Marken

Lindy

Lindy 43185 Bedienungsanleitung

Lindy

Lindy 43185 Bedienungsanleitung

ViziT

ViziT RD-4F Bedienungsanleitung

Jinmuyu Electronics

Jinmuyu Electronics MR811 Series Bedienungsanleitung

AVID ID

AVID ID AVID1043 Bedienungsanleitung

Conrad

Conrad PCMCIA Bedienungsanleitung

Rosslare

Rosslare DR-6255 Bedienungsanleitung

Lindy

Lindy 51541 Bedienungsanleitung

Diapro T?bbi Ürünler

Diapro T?bbi Ürünler Across System Bedienungsanleitung

Johnson Controls

Johnson Controls Kantech tyco ioSmart Bedienungsanleitung

ACS

ACS ACR122L Bedienungsanleitung

Secukey

Secukey S2-MF Bedienungsanleitung

Elecom

Elecom MR-SMC07 series Bedienungsanleitung

Alien

Alien ALR-9800 Bedienungsanleitung

ACS

ACS ACR310 Bedienungsanleitung

Datamars

Datamars R-IN1300 MID Bedienungsanleitung

Alarm Lock

Alarm Lock AL-PRE2 Bedienungsanleitung

xpr

xpr B100PROX-AH Benutzerhandbuch