Panasonic AJ-PCD30PJ Bedienungsanleitung

Operating Instructions

Memory Card Drive

Model No.AJ-PCD30P

Model No.AJ-PCD30E

Before operating this product, please read the instructions carefully, and save this

manual for future use.

SS0611AK1091 -FJ

Printed in Japan VQT3R23-1

ENGLISH

AJ-PCD30P_E-VQT3R23.book 1 ページ２０１１年９月２８日　水曜日　午前１１時６分

Read this first!

For AJ-PCD30P and AJ-PCD30E

indicates safety information.

WARNING:

This apparatus must be earthed.

To ensure safe operation the three-pin plug must be inserted only into a standard three-pin

power point which is effectively earthed through the normal house-hold wiring.

Extension cords used with the equipment must be three-core and be correctly wired to provide

connection to earth. Wrongly wired extension cords are a major cause of fatalities.

The fact that the equipment operates satisfactorily does not imply that the power point is

earthed and that the installation is completely safe. For your safety, if in any doubt about the

effective earthing of the power point, consult a qualified electrician.

WARNING:

zTo reduce the risk of fire or electric shock, do not expose this equipment to rain or moisture.

zTo reduce the risk of fire or electric shock, keep this equipment away from all liquids. Use

and store only in locations which are not exposed to the risk of dripping or splashing liquids,

and do not place any liquid containers on top of the equipment.

WARNING:

Always keep accessories (rubber feet, mounting screws) out of the reach of babies and small

children.

CAUTION:

To reduce the risk of fire or electric shock and annoying interference, use the recommended

accessories only.

CAUTION:

The mains plug of the power supply cord shall remain readily operable.

The AC receptacle (mains socket outlet) shall be installed near the equipment and shall be

easily accessible.

To completely disconnect this equipment from the AC mains, disconnect the mains plug from

the AC receptacle.

AJ-PCD30P_E-VQT3R23.book 2 ページ２０１１年９月２８日　水曜日　午前１１時６分

Read this first! (continue)

For AJ-PCD30P indicates safety information.

Notice (U.S.A. only):

Disposal may be regulated in your community due to Environmental considerations.

For disposal or recycling information, please visit Panasonic website:

http://www.panasonic.com/environmental or call 1-888-769-0149.

FCC NOTICE

NOTIFICATION (Canada)

Declaration of Conformity

Model Number: AJ-PCD30P

Trade Name: Panasonic

Responsible Party: Panasonic Corporation of North America One Panasonic Way, Secaucus,

NJ 07094

Support contact: 1-800-524-1448

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation.

To assure continued compliance, follow the attached installation instructions and do not make

any unauthorized modifications.

CAUTION:

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates,

uses and can radiate radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications. However, there is

no guarantee that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be determined by turning

the equipment off and on, the user is encouraged to try to correct the interference by one of

the following measures:

zReorient or relocate the receiving antenna.

zIncrease the separation between the equipment and receiver.

zConnect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

zConsult the dealer or an experienced radio/TV technician for help.

The user may find the booklet “Something About Interference” available from FCC local

regional offices helpful.

FCC Warning: To assure continued FCC emission limit compliance, follow the attached

installation instructions and the user must use only shielded interface cables when connecting

to host computer or peripheral devices. Also, any unauthorized changes or modifications to

this equipment could void the user’s authority to operate this device.

This class B digital apparatus complies with Canadian ICES-003.

AJ-PCD30P_E-VQT3R23.book 3 ページ２０１１年９月２８日　水曜日　午前１１時６分

Read this first! (continue)

For AJ-PCD30E

indicates safety information.

EEE Yönetmeliğine Uygundur.

EEE Complies with Directive of Turkey.

Caution for AC Mains Lead

FOR YOUR SAFETY PLEASE READ THE FOLLOWING TEXT CAREFULLY.

This product is equipped with 2 types of AC mains cable. One is for continental Europe, etc. and

the other one is only for U.K.

Appropriate mains cable must be used in each local area, since the other type of mains cable is

not suitable.

FOR CONTINENTAL EUROPE, ETC.

Not to be used in the U.K.

FOR U.K. ONLY

This appliance is supplied with a moulded

three pin mains plug for your safety and

convenience.

A 13 amp fuse is fitted in this plug.

Should the fuse need to be replaced

please ensure that the replacement fuse

has a rating of 13 amps and that it is

approved by ASTA or BSI to BS1362.

Check for the ASTA mark or the BSI

mark on the body of the fuse.

If the plug contains a removable fuse

cover you must ensure that it is refitted

when the fuse is replaced.

If you lose the fuse cover the plug must not

be used until a replacement cover is

obtained.

A replacement fuse cover can be

purchased from your local Panasonic

Dealer.

How to replace the fuse

1 Open the fuse compartment with a

screwdriver.

2 Replace the fuse.

Fuse

AJ-PCD30P_E-VQT3R23.book 4 ページ２０１１年９月２８日　水曜日　午前１１時６分

Table of Contents

Read this first! . . . . . . . . . . . . . . . . . . 2

Before Use . . . . . . . . . . . . . . . . . . . . . . 6

Overview. . . . . . . . . . . . . . . . . . . . . . . . 6

Features . . . . . . . . . . . . . . . . . . . . . . . . 6

Supplied Accessories

(AJ-PCD30P/AJ-PCD30E) . . . . . . . . . . 7

Operating Environment

Required for Installation . . . . . . . . . . . 7

Parts and their Functions . . . . . . . . . . 8

Front Panel . . . . . . . . . . . . . . . . . . . . 8

Rear Panel . . . . . . . . . . . . . . . . . . . . 8

Inserting a P2 Card . . . . . . . . . . . . . . . 9

Removing a P2 Card . . . . . . . . . . . . . . 9

Write-protection of P2 Card . . . . . . . 10

Power management function

(automatic switch-off function) . . . . 10

Installation . . . . . . . . . . . . . . . . . . . . . 10

To Connect the device to a Personal

Computer for External Use . . . . . . . 11

Disconnect externally connected

devices from your PC . . . . . . . . . . . 13

To Mount the device in a Personal

Computer 5-type Bay . . . . . . . . . . . 14

P2 Driver . . . . . . . . . . . . . . . . . . . . . . 16

Installing a Windows P2 driver . . . . 16

Installing a Macintosh P2 driver . . . 16

Uninstallation . . . . . . . . . . . . . . . . . 16

Overview of dedicated software . . . 17

Power management setting

(Windows/Macintosh) . . . . . . . . . . . 17

Installation . . . . . . . . . . . . . . . . . . . 17

Uninstallation . . . . . . . . . . . . . . . . . 17

Starting up and shutting down

the Power Management Setting

Software . . . . . . . . . . . . . . . . . . . . . 17

Power Management Setting

Software window . . . . . . . . . . . . . . 18

P2 Drive internal setting

(Windows) . . . . . . . . . . . . . . . . . . . . 19

P2 Drive internal setting . . . . . . . . . 19

Canceling P2 drive internal setting . 19

Troubleshooting . . . . . . . . . . . . . . . . 20

Specifications . . . . . . . . . . . . . . . . . . 21

Microsoft, Windows and Windows Vista are trademarks of Microsoft Corporation of the United

States.

Macintosh, Mac and Mac OS are trademarks of Apple Inc. of the United States.

Other names of companies and products are trademarks or registered trademarks of the respective

companies.

zIn these instructions, Microsoft®Windows®, Windows®XP Professional, Windows Vista®

Business, Windows Vista®Ultimate, Windows®7 Professional, and Windows®7 Ultimate, are

given as “Windows”, “Windows XP Professional”, “Windows Vista Business”, “Windows Vista

Ultimate”, “Windows 7 Professional” and “Windows 7 Ultimate”, respectively.

zSimilarly, in these instructions, Macintosh®, Mac®Pro and Mac OS®X are given as “Macintosh”,

“Mac Pro” and “Mac OS X” respectively.

AJ-PCD30P_E-VQT3R23.book 5 ページ２０１１年９月２８日　水曜日　午前１１時６分

Before Use

zWhile AJ-PCD30 (referred to below as “the

device”) is connected to the personal

computer, install the required drivers from the

CD-ROM.

For details, refer to the installation manual and

“P2 Driver” (page 16) in this manual.

zThe device may become warm during use, but

this is not a malfunction.

zWhen the device is used internally, it may be

necessary to connect the device with part of

the USB cable passing outside your PC. In this

case, be sure sufficient space behind the PC

that is to contain the device.

Overview

The device is a P2 card-dedicated data transfer device with a USB 3.0 interface and a 3 slot drive for

writing and reading P2 content to and from P2 cards using the USB 3.0/2.0 connection in a Windows

PC or Macintosh.

The device is capable of making high-speed transfers of clip data shot with a memory card camera

recorder for P2 cards to a personal computer (Windows/Macintosh).

This device supports not only the transferring and copying of clips recorded on P2 cards, but also direct

editing.

Features

zIt is capable of high speed data transfer of

over 1.5 Gbps*1.

zIt can be used as either an external or an

internal drive. (only Windows)

zSupports both Windows and Macintosh

operating systems.

zThe device can also be connected to a

USB 2.0 Windows PC/Macintosh.

zUp to 2 devices may be connected to a single

PC.*2 *3

*1 This is the transfer speed using the multiple P2 card E series over the USB 3.0 connection.This will vary according

to conditions such as the type of file being transferred, the system, the application software, and the version and

the number of the P2 card.

*2 Connect the USB terminal of the device to your computer using the PC USB port. If the USB terminal of the device

is connected to a USB terminal hub then errors may occur, such as the computer not recognizing the device, or not

applying the necessary drivers. (We cannot guarantee proper operation of the device when connected to a USB

hub.)

*3 When using a Macintosh with 2 of the devices connected, or with the device and at least two other P2 drive

connected, avoid duplication among the volume labels of the P2 cards.

Correct operation cannot be guaranteed if the volume labels are duplicated or left without being set (“NO NAME”is

displayed).

AJ-PCD30P_E-VQT3R23.book 6 ページ２０１１年９月２８日　水曜日　午前１１時６分

Supplied Accessories

(AJ-PCD30P/AJ-PCD30E)

Operating Environment Required for

Installation

To operate the device, the following environment is required on the host computer.

zUSB 3.0 port/USB 2.0 port

The device can be used with a host computer (Windows PC) that does not have a built in USB 3.0 port

by installing a USB 3.0 expansion interface port. Note, however, that Panasonic cannot guarantee

correct operation with all third-party USB 3.0 expansion interface ports.

Recommended USB 3.0 expansion interface ports are listed on the Panasonic website.

http://pro-av.panasonic.net/

The following environment is recommended for the host computer to make full use of the features of the

device.

zA striping configuration using 4 or more hard disk drives is recommended to attain sufficient transfer

speed when transferring data to the hard disk drive.

AC adaptor Bracket

（page 14）

Mounting

screws

(8)

Power cable for AC adaptor CD-ROM

zOperating Instructions (PDF)

zP2 Software

zPower Management Setting Software

Rubber

feet (4)

For AJ-PCD30P

For AJ-PCD30E

(U.K.)

For AJ-PCD30E

(continental Europe,etc.)

AJ-PCD30P_E-VQT3R23.book 7 ページ２０１１年９月２８日　水曜日　午前１１時６分

Parts and their Functions

Front Panel

(1) Power button

Use this button to turn the unit ON and OFF.

When the power is OFF, pressing the power

button switches the power ON. When the

power is ON, pressing the power button for

two seconds or more switches the power

OFF.

<Note>

When the device is located internally, the

device power system is linked to the power

system of your PC and the power switches

on without pressing the power button on the

device.

Caution: Do not switch off the power while

the P2 card is being accessed.

(2) Power Indicator

This indicator lights up in green when the

device is running.

(3) Status Indicator

This indicator lights up in green during

access to a P2 card.

<Note>

Do not remove the P2 card during access of

the card, otherwise files may be corrupted, or

the P2 card may fail.

(4) Card Slots

The device is designed for P2 cards and

does not work with other cards.

(5) EJECT button

Press this button to remove a P2 card from

the device.

Rear Panel

The picture shows the rear panel with its cover

removed.

(1) USB 3.0 connector (Type B)

This connects a USB cable.

Use a USB cable (shielded) compliant with

USB 3.0/USB 2.0.

<Note>

The device is only compatible with USB 3.0/

USB 2.0. It is not compatible with USB 1.1.

If you have a Macintosh, connect using

USB 2.0.

(2) DC IN 12 V Socket

To use the device mounted in a personal

computer, connect one of the power supply

connectors inside the personal computer to

this socket. (page 15)

Do NOT supply power to both the DC IN

12 V socket and DC IN 16 V socket at the

same time.

(3) DC IN 16 V Socket

For external use of the device, connect an

AC adaptor to this socket.

(4) Cable Clamp

Use this clamp to secure the AC adaptor

cable when connecting the device to a

personal computer for external use of the

Drive.

(5) Antitheft Lock

A commercially available antitheft cable can

be connected to this lock.

(1)

(3) (4)

(2)

(5)

(1)(3) (2)(4)(5)

AJ-PCD30P_E-VQT3R23.book 8 ページ２０１１年９月２８日　水曜日　午前１１時６分

Inserting a P2 Card

1Insert the P2 card into one of the card slots.

Press in the card until the EJECT button

pops up.

<Notes>

zBe sure to insert the P2 card horizontally.

Forcing the card in at an angle may

damage it.

zDo not remove a P2 card while it is being

accessed or right after insertion.

Otherwise, the card may be damaged.

2Fold the EJECT button in the direction of the

arrow.

<Note>

Do not use the device with the EJECT button

fully extended.

This may result in the unintentional ejection

of the P2 card or a fault in the EJECT button.

Removing a P2 Card

1Flip up the EJECT button in the direction of

the arrow.

2Press the EJECT button.

The P2 card will slide out far enough to allow

you to remove it.

<Notes>

zTo remove a P2 card on a Macintosh, drag the

P2 card icon to the Trash. Then check that the

icon has disappeared and the access indicator

on the device has turned off before physically

removing the P2 card.

zDo not remove a P2 card that is being

accessed. Removing a P2 card during access

may cause the device to malfunction.

AJ-PCD30P_E-VQT3R23.book 9 ページ２０１１年９月２８日　水曜日　午前１１時６分

Write-protection of P2 Card

A P2 card has a write-protect switch. Setting this

switch to “PROTECT” can prevent writing and

deleting of data.

Note: The write-protect switch is not effective

when the P2 card is inserted in the device.

Make sure you remove the P2 card from the

device, set the switch, then re-insert the card, in

order to effect the switch setting.

Power management function

(automatic switch-off function)

zWhen the device is used externally, the power

will switch off automatically after four hours if

no access is made to the P2 cards for reading,

writing etc. To use, switch the power on again.

zWhen the device is used internally, the

automatic switch-off function for power

management is disabled.

<Note>

You can use the Power Management Setting

Software to set the time after which the power is

automatically switched off.

Select from among Off/1 hour/2 hours/4 hours/

8 hours. The default setting at shipping is

4 hours. (page 17)

Caution: If the designated amount of time has

passed, the device will automatically power off

even if you have a file open at the time. If that

happens, the file system may be damaged.

Handle your files carefully.

Installation

There are two ways to connect the device to a personal computer (Windows/Macintosh):

1 Using the device as an external drive connected to a personal computer (Windows/Macintosh)

2 Mounting the device in a 5-type bay of a desktop personal computer (Windows)

PROTECT

Setting the write-

protect switch to

“PROTECT” can

prevent writing and

deleting of data.

Setting the write-

protect switch to this

side allows writing

and deleting of data.

AJ-PCD30P_E-VQT3R23.book 10 ページ２０１１年９月２８日　水曜日　午前１１時６分

Andere Handbücher für AJ-PCD30PJ

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Panasonic Kartenleser Handbücher

Panasonic

Panasonic UD-7900N14EU Bedienungsanleitung

Panasonic

Panasonic FZ-VSC402 Series Bedienungsanleitung

Panasonic

Panasonic AJ-PCD10P Bedienungsanleitung

Panasonic

Panasonic ZU-1870MA6T2 Bedienungsanleitung

Panasonic

Panasonic FZ-VSDR55 Series Bedienungsanleitung

Panasonic

Panasonic LP-ABR11 Bedienungsanleitung

Panasonic

Panasonic AJ-PCD2G Bedienungsanleitung

Panasonic

Panasonic FZ-VDM551 Series Bedienungsanleitung

Panasonic

Panasonic AJ-PCD20MC Bedienungsanleitung

Panasonic

Panasonic FZ-VSC552 Series Bedienungsanleitung

Panasonic

Panasonic LP-ABR10 Series Stücklistenhandbuch

Panasonic

Panasonic FZ-VSC551 Series Bedienungsanleitung

Panasonic

Panasonic UD-794D Bedienungsanleitung

Panasonic

Panasonic FZ-VNF551 Series Bedienungsanleitung

Panasonic

Panasonic AJ-PCD10E Bedienungsanleitung

Panasonic

Panasonic BN-SDCMAB Bedienungsanleitung

Panasonic

Panasonic AJ-PCD20EJ Bedienungsanleitung

Panasonic

Panasonic FZ-VNF401 Series Bedienungsanleitung

Panasonic

Panasonic CF-VCRU11U Bedienungsanleitung

Panasonic

Panasonic au-xpd1 Bedienungsanleitung

Panasonic

Panasonic FZ-VGT551 Series Bedienungsanleitung

Panasonic

Panasonic AJHPM110E - MEMORY CARD PORTABLE... Bedienungsanleitung

Panasonic

Panasonic AJ-PCD2GPJ Bedienungsanleitung

Panasonic

Panasonic AJ-PCD35 Bedienungsanleitung

Beliebte Kartenleser Handbücher anderer Marken

Lindy

Lindy 43185 Bedienungsanleitung

Lindy

Lindy 43185 Bedienungsanleitung

ViziT

ViziT RD-4F Bedienungsanleitung

Jinmuyu Electronics

Jinmuyu Electronics MR811 Series Bedienungsanleitung

AVID ID

AVID ID AVID1043 Bedienungsanleitung

Conrad

Conrad PCMCIA Bedienungsanleitung

Rosslare

Rosslare DR-6255 Bedienungsanleitung

Lindy

Lindy 51541 Bedienungsanleitung

Diapro T?bbi Ürünler

Diapro T?bbi Ürünler Across System Bedienungsanleitung

Johnson Controls

Johnson Controls Kantech tyco ioSmart Bedienungsanleitung

ACS

ACS ACR122L Bedienungsanleitung

Secukey

Secukey S2-MF Bedienungsanleitung

Elecom

Elecom MR-SMC07 series Bedienungsanleitung

Alien

Alien ALR-9800 Bedienungsanleitung

ACS

ACS ACR310 Bedienungsanleitung

Datamars

Datamars R-IN1300 MID Bedienungsanleitung

Alarm Lock

Alarm Lock AL-PRE2 Bedienungsanleitung

xpr

xpr B100PROX-AH Benutzerhandbuch