Panasonic AK-HRP1000G Bedienungsanleitung

DVQP2399ZAW1020AM0 -PS

ENGLISH

For details of operating Remote Operation Panel AK-HRP1000G, please

visit the Panasonic website (https://pro-av.panasonic.net/manual/en/index.

html), and refer to the Operating Instructions (HTML or PDF).

Read this document when using the AK-HRP1000G Remote Operation Panel in

conjunction with AJ-CX4000G Memory Card Camera-Recorder.

Operating Guide

Remote Operation Panel

Model No. AK-HRP1000G

Connecting the Unit to AJ-CX4000 Cameras 3

Connections 3

Compatible Functions List 4

ROP Menu (during AJ-CX4000 Connection) 8

ROP menu list 8

01 SHUTTER SPEED 13

02 PEDESTAL 14

03 CHROMA 15

04 GAIN 16

05 COLOR TEMP 17

06 WHITE BALANCE 18

07 FLARE 19

08 GAMMA 20

09 KNEE 21

10 WHITE CLIP 22

11 DRS 23

12 DETAIL 24

13 SKIN TONE DTL 25

14 MATRIX 26

15 COLOR CORRECTION 27

16 SYSTEM CAM 30

17 CAMERA MENU CONTROL 31

18 ROP SETTING 32

19 CONNECT SETTING 32

20 ROP IP SETTING 32

21 CAMERA IP SETTING 32

22 AUTO IRIS SETTING 33

23 SWITCHER LINK 34

24 AW CONTROLLER LINK 34

- 2 -

Table of Contents

Connecting the Unit to AJ-CX4000 Cameras

Connections

Use a LAN cable to connect the <REMOTE> connector at the rear of the AJ-CX4000 to the <LAN> connector of the AK-

HRP1000G.

Set the connection setting to “LAN(AJ2)” in the [CONNECT SETTING] menu.

ヤヰワワユヤヵチヴユヵヵリワヨ

ヒチバチヒヒ

ヤヰワワユヤヵチヮヰュユドㄑㄖㄔㄉナヤヰワワユヤヵチヮヰュユドㄑㄖㄔㄉナヤヰワワユヤヵチヮヰュユドㄑㄖㄔㄉナ

ワヰワワヰワ

ヤモヮベヤモヮペ

ロモワドモルビナワヰワワヰワワヰワワヰワワヰワ

ヤモヮフ

ワヰワ

ヤモヮヘヤモヮビヤモヮピヤモヮヒヤモヮブヤモヮプ

- 3 -

Connecting the Unit to AJ-CX4000 Cameras

Compatible Functions List

When the unit is used in conjunction with an AJ-CX4000 Memory Card Camera-Recorder, a portion of the unit’s button, dial, and other con-

trol functions will be limited or disabled. Be sure to refer to the following table.

Front panel 1

Front panel 2

Front panel 3

Front panel 4

Front panel 5

Front panel 6

Front panel 7

Front panel 8

Front panel 9

Number Part name

✓: Enabled

×: Disabled

Remarks

Front panel 1

[POWER HEAD] button ×

[POWER VF] button ×

[BARS/TEST] button ✓Only the ON/OFF for the color bar signal output will

function.

[REF. RECALL] button ×

[AUTO WHITE] button ✓This functions when the [WHITE BALANCE] >

[W.BAL SELECT] setting is “A” or “B”.

[AUTO BLACK] button ✓

[AUTO SET UP] button ×

[CHARA] button ✓

[MATRIX] button ✓

[SKIN DTL] button ✓This only turns skin detail A ON/OFF.

[DRS] button ✓

[B.GAMMA] button ×

[ASSIGN] button ✓

- 4 -

Connecting the Unit to AJ-CX4000 Cameras

Number Part name

✓: Enabled

×: Disabled

Remarks

Front panel 2

[ASSIGN STATUS] button ✓

Buttons [1] to [5] (CONTROL/MODE) ✓

[CONTROL/MODE] button ✓

Front panel 3

LCD panel ✓

[MENU] dial ✓

[EXIT] button ✓

[UNDO] button ×

[MENU] button ✓

Front panel 4

[ON] indicator (SCENE FILE) ✓This is always lit.

Scene file page switching button ×

[1/6], [2/7], [3/8], [4/EXT1], and

[5/EXT2] buttons (SCENE FILE)

✓Scenes 1 to 6 are enabled.

[STORE] button ✓When you press this at the same time as the [HEAD]

button, recording starts or stops.

Front panel 5

[ND] indicator ×

[ND] setting buttons ×

[ND] display ✓Displayed but cannot be adjusted.

[CC] indicator ×

[CC] setting buttons ×

[CC] display ✓Displayed but cannot be adjusted.

[HEAD] button ✓When you press this at the same time as the

[STORE] button, recording starts or stops.

[ECC] button ×

[M.GAIN] indicator ✓

[M.GAIN] setting buttons ✓

[M.GAIN] display ✓Display varies depending on the selected mode.

When dB mode is selected:

Displays the dB setting value.

When ISO mode is selected:

Displays the ISO setting value (the last two digits

of the setting value are not displayed). A dot is

displayed at the bottom right.

[VAR] button ×

- 5 -

Connecting the Unit to AJ-CX4000 Cameras

Number Part name

✓: Enabled

×: Disabled

Remarks

Front panel 6

[SHUTTER] display ✓Display varies depending on the shutter mode.

When auto shutter is selected:

Displays “AUTO”.

When fixed shutter is selected:

Displays the numerical value for the denom-

inator of the shutter speed.

When synchro scan (time display) is selected:

Displays the numerical value for the denom-

inator of the shutter speed. When the value is

four or more digits, the digits after the decimal

point are not displayed.

When synchro scan (shutter open angle dis-

play) is selected:

Displays the shutter open angle.

[ON] button (SHUTTER) ✓

[SYNC] button (SHUTTER) ✓Changes the shutter mode of the electronic shutter.

OFF:

Fixed shutter (FIX)

ON:

Synchro scan (SYNC)

[SHUTTER] setting buttons ✓

Front panel 7

[GAIN R], [GAIN G], and [GAIN B]

dials

✓[GAIN G] dial is disabled.

[BLACK R], [BLACK G], and [BLACK

B] dials

✓

[FLARE] button ✓

[PAINT LOCK] button ✓

[DTL] dial ✓

[CAM SEL] indicator ✓

[SELECT] dial ✓

[TEMP] indicator ✓

[SYNC] indicator ✓

[MFLR] indicator ×

[USER] indicator ✓

- 6 -

Connecting the Unit to AJ-CX4000 Cameras

Number Part name

✓: Enabled

×: Disabled

Remarks

Front panel 8

[EXT] indicator ×

[D.EXT] indicator ×

[IRIS] lever ✓

[M.PED] dial ✓

[RELATIVE] button ×

[SENSE] dial ✓

[COARSE] dial ✓

[IRIS] display ✓

[AUTO] button ✓

[CLOSE] button ×

[M.PED] display ✓

[IRIS LOCK] button ✓

[M.PED LOCK] button ✓

Front panel 9

Camera number/tally display ✓

[ALM] indicator ✓

[OPT] indicator ×

[PANEL ACTIVE] button ✓

[CALL] button ×

[PREVIEW] button ×

Memory card slot ✓

Memory card access indicator ✓

Torque adjustment screw ✓

- 7 -

Connecting the Unit to AJ-CX4000 Cameras

ROP Menu (during AJ-CX4000 Connection)

ROP menu list

When an AJ-CX4000 Memory Card Camera-Recorder is connected, the ROP menu will be as follows. For setting values related to the cam-

era, refer to the Operating Instructions for the camera.

For details on menu operations, refer to the following sections in the Operating Instructions.

“Displaying menus”

“Basic menu operations”

NOTE

To perform menu operations, upgrade the version of the unit system to 4.82-00-0.00 or later.

The setting values of functions that are not supported are indicated as “－”.

01 SHUTTER SPEED

SHUTTER “SHUTTER” (see page 13)

SPEED MODE “SPEED MODE” (see page 13)

SYNC TYPE “SYNC TYPE” (see page 13)

SPEED “SPEED” (see page 13)

02 PEDESTAL

M.PED “M.PED” (see page 14)

OFFSET “OFFSET” (see page 14)

PED R “PED R” (see page 14)

PED G “PED G” (see page 14)

PED B “PED B” (see page 14)

03 CHROMA

LEVEL % “LEVEL %” (see page 15)

PHASE “PHASE” (see page 15)

04 GAIN

GAIN “GAIN” (see page 16)

AGC “AGC” (see page 16)

AGC LIMIT “AGC LIMIT” (see page 16)

AGC POINT “AGC POINT” (see page 16)

05 COLOR TEMP

COLOR TEMP “COLOR TEMP” (see page 17)

GAIN R “GAIN R” (see page 17)

AXIS G “AXIS G” (see page 17)

GAIN B “GAIN B” (see page 17)

06 WHITE BALANCE

W.BAL SELECT “W.BAL SELECT” (see page 18)

GAIN OFFSET “GAIN OFFSET” (see page 18)

GAIN R “GAIN R” (see page 18)

GAIN B “GAIN B” (see page 18)

ATW SPEED “ATW SPEED” (see page 18)

ATW TARGET R “ATW TARGET R” (see page 18)

ATW TARGET B “ATW TARGET B” (see page 18)

07 FLARE

FLARE R “FLARE R” (see page 19)

FLARE G “FLARE G” (see page 19)

FLARE B “FLARE B” (see page 19)

SW “SW” (see page 19)

- 8 -

ROP Menu (during AJ-CX4000 Connection)

08 GAMMA

MODE “MODE” (see page 20)

GAMMA “GAMMA” (see page 20)

SW “SW” (see page 20)

F-REC DYNMC LV “F-REC DYNMC LV” (see page 20)

F-REC BLK.S LV “F-REC BLK.S LV” (see page 20)

V-REC K.SLOPE “V-REC K.SLOPE” (see page 20)

V-REC K.POINT “V-REC K.POINT” (see page 20)

BLACK GAMMA “BLACK GAMMA” (see page 20)

B.GAMMA RANGE “B.GAMMA RANGE” (see page 20)

09 KNEE

MODE “MODE” (see page 21)

POINT “POINT” (see page 21)

SLOPE “SLOPE” (see page 21)

AUTO KNEE RSPNS “AUTO KNEE RSPNS” (see page 21)

AUTO KNEE POINT “AUTO KNEE POINT” (see page 21)

AUTO KNEE LEVEL “AUTO KNEE LEVEL” (see page 21)

HLG KNEE SW “HLG KNEE SW” (see page 21)

HLG KNEE POINT “HLG KNEE POINT” (see page 21)

HLG KNEE SLOPE “HLG KNEE SLOPE” (see page 21)

H.COLOR SW “H.COLOR SW” (see page 21)

10 WHITE CLIP

WHITE CLIP SW “WHITE CLIP SW” (see page 22)

WHITE CLIP LEVEL(%) “WHITE CLIP LEVEL(%)” (see page 22)

11 DRS

DRS “DRS” (see page 23)

EFFECT DEPTH “EFFECT DEPTH” (see page 23)

12 DETAIL

DTL “DTL” (see page 24)

CORING “CORING” (see page 24)

H.DTL LEVEL “H.DTL LEVEL” (see page 24)

V.DTL LEVEL “V.DTL LEVEL” (see page 24)

FREQ. “FREQ.” (see page 24)

LEVEL DEPEND. “LEVEL DEPEND.” (see page 24)

KNEE APE LV “KNEE APE LV” (see page 24)

GAIN(+) “GAIN(+)” (see page 24)

GAIN (-) “GAIN(-)” (see page 24)

DTL SW “DTL SW” (see page 24)

13 SKIN TONE DTL

SKIN TONE DTL A “SKIN TONE DTL A” (see page 25)

SKIN TONE DTL B “SKIN TONE DTL B” (see page 25)

SKIN TONE DTL C “SKIN TONE DTL C” (see page 25)

DETECT TBL “DETECT TBL” (see page 25)

EFFECT “EFFECT” (see page 25)

I CENTER “I CENTER” (see page 25)

I WIDTH “I WIDTH” (see page 25)

Q WIDTH “Q WIDTH” (see page 25)

Q PHASE “Q PHASE” (see page 25)

- 9 -

ROP Menu (during AJ-CX4000 Connection)

14 MATRIX

TABLE “TABLE” (see page 26)

ADAPTIVE MATRIX “ADAPTIVE MATRIX” (see page 26)

R-G “R-G” (see page 26)

R-B “R-B” (see page 26)

G-R “G-R” (see page 26)

G-B “G-B” (see page 26)

B-R “B-R” (see page 26)

B-G “B-G” (see page 26)

15 COLOR CORRECTION

SAT R “SAT R” (see page 28)

PHASE R “PHASE R” (see page 28)

SAT R-R-Mg “SAT R-R-Mg” (see page 28)

PHASE R-R-Mg “PHASE R-R-Mg” (see page 28)

SAT R-Mg “SAT R-Mg” (see page 28)

PHASE R-Mg “PHASE R-Mg” (see page 28)

SAT Mg “SAT Mg” (see page 28)

PHASE Mg “PHASE Mg” (see page 28)

SAT Mg-B “SAT Mg-B” (see page 28)

PHASE Mg-B “PHASE Mg-B” (see page 28)

SAT B “SAT B” (see page 28)

PHASE B “PHASE B” (see page 28)

SAT B-Cy “SAT B-Cy” (see page 28)

PHASE B-Cy “PHASE B-Cy” (see page 28)

SAT Cy “SAT Cy” (see page 28)

PHASE Cy “PHASE Cy” (see page 28)

SAT Cy-G “SAT Cy-G” (see page 28)

PHASE Cy-G “PHASE Cy-G” (see page 28)

SAT G “SAT G” (see page 28)

PHASE G “PHASE G” (see page 28)

SAT G-Yl “SAT G-Yl” (see page 28)

PHASE G-Yl “PHASE G-Yl” (see page 28)

SAT G-Yl-Yl “SAT G-Yl-Yl” (see page 28)

PHASE G-Yl-Yl “PHASE G-Yl-Yl” (see page 28)

SAT Yl “SAT Yl” (see page 28)

PHASE Yl “PHASE Yl” (see page 28)

SAT Yl-Yl-R “SAT Yl-Yl-R” (see page 28)

PHASE Yl-Yl-R “PHASE Yl-Yl-R” (see page 29)

SAT Yl-R “SAT Yl-R” (see page 29)

PHASE Yl-R “PHASE Yl-R” (see page 29)

SAT Yl-R-R “SAT Yl-R-R” (see page 29)

PHASE Yl-R-R “PHASE Yl-R-R” (see page 29)

SW “SW” (see page 29)

16 SYSTEM CAM

TALLY CONTROL “TALLY CONTROL” (see page 30)

TALLY INPUT “TALLY INPUT” (see page 30)

TALLY SIGNAL “TALLY SIGNAL” (see page 30)

TALLY CONT MD “TALLY CONT MD” (see page 30)

- 10 -

ROP Menu (during AJ-CX4000 Connection)

Andere Handbücher für AK-HRP1000G

Inhaltsverzeichnis

Andere Panasonic Bedienfeld Handbücher

Panasonic

Panasonic AK-HRP1005G Bedienungsanleitung

Panasonic

Panasonic AV-SF500 Bedienungsanleitung

Panasonic

Panasonic AV-HS60C3G Bedienungsanleitung

Panasonic

Panasonic AWRP655N - MULTI FUNCTION CONTROLLER Bedienungsanleitung

Panasonic

Panasonic AWRP305 - MULTI PAN TILT CTL P Bedienungsanleitung

Panasonic

Panasonic AW-RP50 Bedienungsanleitung

Panasonic

Panasonic AK-HRP250G Bedienungsanleitung

Panasonic

Panasonic AV-HS60C4P Bedienungsanleitung

Panasonic

Panasonic AK-HRP1000G Bedienungsanleitung

Panasonic

Panasonic WX-CC411 Bedienungsanleitung

Panasonic

Panasonic AWRP501 - HYBRID CONTROL PANEL Bedienungsanleitung

Panasonic

Panasonic AWRP505 - MULTI HYBRID CTL PAN Bedienungsanleitung

Panasonic

Panasonic AK-HRP1005G Bedienungsanleitung

Panasonic

Panasonic AWRP301 - PAN/TILT CONTROL PAN Bedienungsanleitung

Panasonic

Panasonic AG-RCP30P Bedienungsanleitung

Panasonic

Panasonic WV-CU980 Technisches Handbuch

Panasonic

Panasonic AK-HRP1010G Bedienungsanleitung

Panasonic

Panasonic AWRP501 - HYBRID CONTROL PANEL Bedienungsanleitung

Panasonic

Panasonic AK-HRP1005G Bedienungsanleitung

Panasonic

Panasonic AG-RCP30P Bedienungsanleitung

Panasonic

Panasonic AWRP301 - PAN/TILT CONTROL PAN Bedienungsanleitung

Panasonic

Panasonic AK-HRP1005GJ Bedienungsanleitung

Panasonic

Panasonic AY-RP500 Bedienungsanleitung

Panasonic

Panasonic AWRP505 - MULTI HYBRID CTL PAN Bedienungsanleitung

Beliebte Bedienfeld Handbücher anderer Marken

RDZ

RDZ PC-HRX Bedienungsanleitung

STG-BEIKIRCH

STG-BEIKIRCH MZ3 Technisches Handbuch

Efka

Efka Variocontrol V810 Bedienungsanleitung

Cebora

Cebora 208-10 Bedienungsanleitung

AMX

AMX AutoPatch CP-15 Bedienungsanleitung

Satel

Satel CA-6 KLED-S Bedienungsanleitung

Evolution

Evolution IQ plus 800 Bedienungsanleitung

Fagor

Fagor 8040 TCO CNC Bedienungsanleitung

AKO

AKO PROCool AKO-17635-2 Bedienungsanleitung

ABB

ABB 6136/30M-101 Bedienungsanleitung

Telikou

Telikou BK-603 Belt Pack Bedienungsanleitung

Mapei

Mapei Mapeheat Thermo Touch Bedienungsanleitung

Bosch

Bosch D9412GV4 Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries SC-SL4-AE2/1 Bedienungsanleitung

Sminn

Sminn BOX L VF1L EI Bedienungsanleitung

Balboa

Balboa TP600 Bedienungsanleitung

Nice

Nice HSCU1 Technische Daten

Truma

Truma CP plus Bedienungsanleitung