Panasonic AK-HRP1015 Gebrauchs- und Pflegehandbuch
AK-HRP1015 Firmware Update Procedure / Mar.2021
Page1/4
Panasonic Corporation
AK-HRP1015 Firmware update procedure
1. Version display method
1-1
Each software version can be confirmed at item “SOFT VERSION” and “FPGA VERSION” in ROP SETTING menu.
1. Supply the power to AK-HRP1015 by connecting to AK-UC4000/UC3000/HC5000, AK-UCU600/UCU500, or PoE
HUB.
2. Press the SETUP button. The TOP menu screen of ROP menu appears.
3. Select “ROP SETTING”by pressing the Function △▽button.
4. Press the EXEC button to open the ROP SETTING menu.
5. When pressing the Function △▽button, SYSTEM version and each Software version can be confirmed.
SETUP button
Function button
MENU 7 / 8
37 ROP SETTING
38 CONNECT SETTING
39 ROP IP SETTING
40 CAMERA IP SETTING
41 SD CARD STORE
42 SD CARD LOAD
EXEC button
ROP SETTING 5 / 6
IRIS CALIBRATION
UPGRADE TOP BOTTOM
NO? NO? NO?
SYSTEM VERSION 1.00-00-0.00
ROP SETTING 6 / 6
SOFT VERSION 1.00-0000.00
FPGA VERSION 1.00-00-0.00
AK-HRP1015 Firmware Update Procedure / Mar.2021
Page2/4
Panasonic Corporation
1-2. Preparation
CAUTION : Before Updating Software
Do not power down or pull card while upgrading. If the program quits during loading, the data will be erased or
part writing condition and the restart is not made.
< Preparation for SD memory card >
1. One piece of SD memory cards (SD, SDHC or SDXC memory card) is required. Use only SD memory cards
that comply with the SD, SDHC or SDXC specifications.
2. Insert an SD memory card into the card slot of this unit and format it.
NOTE: SD memory card used in this unit requires to be conformed to SDTM standards. Be sure to format SD memory
card on this unit.
3.
< Copy the update file >
1. Accept the software usage agreement and download the update file data “DV91000****.zip” for the AK-
HRP1015 firmware from the following support web site.
https://pro-av.panasonic.net/en/ Support / PASS(Service Support website)
2. Copy the file “DV91000****.zip”to hard disk of your PC and extract the file.
3. Insert the formatted SD memory card into the PC’s card slot.
Then copy the extracted update folder “P R I VAT E ”to the root directory (*1) of the card.
Folder: PRIVATE\MEIGROUP\PAVCN\SBG\SYSCAM\FW\HRP1015*
(*1) : Root directory = top-level directory (i.e., it is not a folder) of the file structure
AK-HRP1015 Firmware Update Procedure / Mar.2021
Page3/4
Panasonic Corporation
2. Update procedure
1. Insert the SD memory card into the SD memory card slot.
2. Supply the power to AK-HRP1015 by connecting to AK-UC4000/UC3000/HC5000, AK-UCU600/UCU500, or PoE
HUB.
3. Press the SETUP button. The TOP menu screen of ROP menu appears.
4. Select “ROP SETTING”by pressing the Function △▽button.
5. Press the EXEC button to open the ROP SETTING menu.
6. Select “UPGRADE”by pressing the Function △▽button.
7. Select “YES”by turning the MENU dial A, and press the MENU dial A. Confirm dialog appears.
▽Function button
MENU dial A
MENU dial B
MENU dial C
SETUP button
EXEC button
△Function button
MENU 7 / 8
37 ROP SETTING
38 CONNECT SETTING
39 ROP IP SETTING
40 CAMERA IP SETTING
41 SD CARD STORE
42 SD CARD LOAD
ROP SETTING 5 / 6
IRIS CALIBRATION
UPGRADE TOP BOTTOM
NO? NO? NO?
SYSTEM VERSION 1.00-00-0.00
Turn
MENU
dial A
ROP SETTING 5 / 6
IRIS CALIBRATION
UPGRADE TOP BOTTOM
YES? NO? NO?
SYSTEM VERSION 1.00-00-0.00
Press MENU dial A
AK-HRP1015 Firmware Update Procedure / Mar.2021
Page4/4
Panasonic Corporation
8. When pressing the MENU dial C, the update will start.
NOTE: Pressing the MENU dial B while “No (EXIT)”is selected, the update will be cancel.
Software update takes approx. 3min. Do not power down while updating.
9. When the update is completed, the message “COMPLETE”is displayed.
10. When pressing the MENU dial C, ROP will reboot automatically. After reboot, confirm that the version number
is renewed for your confirmation update was correctly done follow the item “ Version display method”.
3. Confirm the version number is renewed
Follow the procedure of “Step1”, confirm the version number is renewed.
If it succeeded to update, the update file in the SD memory card is not need anymore.
If the version update fails, turn the power to ON again after inserting SD card in which the update file is saved.
ROP SETTING 5 / 6
IRIS CALIBRATION
UPGRADE TOP BOTTOM
NO? NO? NO?
SYSTEM VERSION 1.00-00-0.00
Confirm
Do you upgrade it?
?
No
( ENC2 )
Yes
( ENC3 )
Press
MENU
dial C
ROP SETTING 5 / 6
IRIS CALIBRATION
UPGRADE TOP BOTTOM
NO? NO? NO?
SYSTEM VERSION 1.00-00-0.00
Confirm
Do you upgrade it?
?
No
( EXIT )
Yes
( ENC3 )
ROP SETTING 5 / 6
IRIS CALIBRATION
UPGRADE TOP BOTTOM
NO? NO? NO?
SYSTEM VERSION 1.00-00-0.00
Information
ROP Upgrading…
NOT REMOVE CARD
!
ROP SETTING 5 / 6
IRIS CALIBRATION
UPGRADE TOP BOTTOM
NO? NO? NO?
SYSTEM VERSION 1.00-00-0.00
Information
COMPLETE
Push OK to reboot system.
!
Yes
( ENC3 )
Wait 3 minutes.
Reboot
Press MENU dial C
Inhaltsverzeichnis
Andere Panasonic Controller Handbücher
Panasonic
Panasonic AWRP605 - CCU & PAN/TILT CONTR Bedienungsanleitung
Panasonic
Panasonic EF-S1C Bedienungsanleitung
Panasonic
Panasonic GM1 Series Bedienungsanleitung
Panasonic
Panasonic FP0H Series Bedienungsanleitung
Panasonic
Panasonic FP7 Series Bedienungsanleitung
Panasonic
Panasonic FMU Bedienungsanleitung
Panasonic
Panasonic AW-RP60GJS Bedienungsanleitung
Panasonic
Panasonic ACXF60-03410 Bedienungsanleitung
Panasonic
Panasonic S-LINK V Bedienungsanleitung
Panasonic
Panasonic FP0 Series Bedienungsanleitung
Panasonic
Panasonic FP2 Series Bedienungsanleitung
Panasonic
Panasonic AF7CPS Series Bedienungsanleitung
Panasonic
Panasonic FP3 Bedienungsanleitung
Panasonic
Panasonic AFPX-COM5 Bedienungsanleitung
Panasonic
Panasonic CZ-CAPE2 Kurzanleitung
Panasonic
Panasonic SG-PK-M Series Bedienungsanleitung
Panasonic
Panasonic EYFR03 Einrichtungshandbuch
Panasonic
Panasonic FP7 Series Bedienungsanleitung
Panasonic
Panasonic MGSDB2 Series Bedienungsanleitung
Panasonic
Panasonic FP-E Betriebsanleitung
