Panasonic KX-TG2730S - 2.4 GHz DSS Expandable Cordless... Bedienungsanleitung

2.4GHz Multi-Handset Cordless Phone System

Model No. KX-TG2730S

Pulse-or-tone-dialing capability

Operating Instructions

Charge the battery for about 15 hours before initial use.

PLEASE READ BEFORE USE AND SAVE.

Contents:

Location of Controls 2

Connections 5

Battery Installation/Battery Charge 6

Recording a Greeting Message 7

Making/Answering calls with the Handset 8

Making/Answering calls with the Base Unit 9

Caller ID Service 9

Automatic Answering Operation 10

Listening to Messages 10

Important Safety Instructions 11

FCC and Other Information 13

–2–

Please read IMPORTANT SAFETY

INSTRUCTIONS on page 11 before use.

Read and understand all instructions.

Location of Controls

■Handset

INTERCOM

TRANSFER

CLEAR

SP-PHONE

HOLD

FUNCTION

REDIAL

CALLWAIT

TONE

CONF

TALK

OFF

FLASH

PAUS E

Back side

Speaker

Headset Jack

(TONE) Button

(TALK) Button

(Speakerphone)

Button

CONF (Conference)/FUNCTION

Microphone

Charge Contacts

Antenna

Display

(OFF) Button

(HOLD/CLEAR)/

(INTERCOM/TRANSFER)

Button

(PAUSE/REDIAL)

Button

Soft Keys

Navigator Key

( , , , )

(FLASH/CALL!WAIT)

Button

–3–

■Base unit

123

ERASE

STOP

HOLDCONF

NEWMESSAGE/SLOWTALK

MAILBOX

MIC

DIGITAL

SPREADSPECTRUM

CHARGE

MULTI HANDSET

REDIAL

PAUSE

MUTE

TONE

DIGITALSPPHONE

FLASH/

CALL WAIT

456

TRANSFER

INTERCOM

PRIVACY

MEMO

GREETING

PROGRAM RINGER/

AUTO

RINGER

LOUD/

ROOM

MONITOR

IN USE

Display

MIC (Microphone)

CHARGE Indicator

(PROGRAM) Button

(RINGER/AUTO) Button

(DIGITALÒSP-PHONE) Button and

Indicator

(MUTE) Button and Indicator

(FLASH/CALLÒWAIT) Button

(REDIAL/PAUSE) Button

IN USE Indicator

(INTERCOM/TRANSFER)

Button

(PRIVACY) Button and Indicator

(HOLD) Button

(CONF) (Conference)

Button

–4–

■Base unit

MIC

CHARGE

ERASE

STOP

MULTI HANDSET

123

NEWMESSAGE/SLOWTALK

MAILBOX

HOLDCONF

REDIAL

PAUSE

MUTE

TONE

DIGITAL SPPHONE

FLASH/

CALL WAIT

DIGITAL

SPREADSPECTRUM

TRANSFER

INTERCOM

456

PRIVACY

RINGER

LOUD/

MEMO

GREETING

PROGRAMRINGER/

AUTO

ROOM

MONITOR

IN USE

(ERASE) Button (STOP) Button

(GREETING) Button

(ANSWERÒON) Button

and Indicator

(MEMO) Button ROOM MONITOR/INTERCOM

Indicator

Antenna

(TONE) Button

Antenna

Charge

Contacts

(MAILBOX) Buttons

Navigator Key

( , , , )

–5–

Connections

■Connect the AC adaptor and the telephone line cord.

•USE ONLY WITH Panasonic AC ADAPTOR PQLV10.

•The AC adaptor must remain connected at all times. (It is normal for the

adaptor to feel warm during use.)

Hook

Telephone Line Cord

AC Adaptor

Power Outlet (AC 120 V, 60 Hz)

Single-Line Telephone Jack (RJ11C)

Fasten the AC adaptor cord to

prevent it from being

disconnected.

Raise the antennas.

–6–

Battery Installation/Battery Charge

■Recharge

Recharge the battery when:

–"Recharge battery" is displayed,

–" " flashes on the display, or

–the handset beeps every minute while it is in use.

•Clean the handset and the base unit charge contacts with a soft, dry

cloth once a month. Clean more often if the unit is subject to grease,

dust or high humidity. If not, the battery may not charge properly.

•If the battery is fully charged, you do not have to place the handset on the

base unit until "Recharge battery" is displayed and/or " " flashes.

This will maximize the battery life.

•The battery cannot be overcharged.

■Battery installation

1 Install the battery in the handset.

2 Close the handset cover.

■Battery charge

To power the handset, charge the battery.

Place the handset on the base unit for about 15 hours before initial use.

A nickel cadmium battery that is recyclable powers the product

you have purchased. At the end of its useful life, under various

state and local laws, it is illegal to dispose of this battery into

your municipal waste stream. Please call

1-800-8-BATTERY for information on how to recycle this

battery.

–7–

You can record a personal greeting message of up to 2 minutes. If a greeting

message is not recorded, one of two pre-recorded greetings will be played

when a call is received.

•All messages (greeting, incoming, etc.) are stored in digital memory. The

total recording time is about 15 minutes. We recommend you record a

brief greeting message in order to leave more time for recording new

messages.

1 Press and hold (GREETING) until a long beep is heard.

2 After the long beep, talk clearly, about 8 inches (20 cm) away from the MIC

(microphone).

3 When finished, press (GREETING).

•If you do not record a greeting message, one of two messages will be played

when a call is received, depending on the caller’s recording time.

Recording a Greeting Message

–8–

■To make a call

1 Press or .

2 Dial a telephone number.

3 To hang up, press (OFF) or place the handset on the base unit.

•If "No link to base. Walk closer to base and try again" is

displayed and an alarm tone sounds in step 1, move closer to the base unit

or place the handset on the base unit, and try again.

•To redial the last number, press or , then press

(PAUSE/REDIAL).

•To adjust the receiver volume/speaker volume:

To increase, press . To decrease, press .

•To put a call on hold, press (HOLD/CLEAR).

•To release the hold, press (HOLD/CLEAR).

■To answer a call

Press or .

Making/Answering Calls with the Handset

–9–

Making/Answering Calls with the Base Unit

■To make a call

1 Press (DIGITAL!SP-PHONE).

2 Dial a telephone number.

3 Talk into the MIC (microphone).

4 To hang up, press (DIGITAL!SP-PHONE).

•To redial the last number, press (DIGITAL!SP-PHONE), then press

(REDIAL/PAUSE).

•To adjust the speaker volume:

To increase, press . To decrease, press .

•To put a call on hold, press (HOLD).

•To release the hold, press (DIGITAL!SP-PHONE).

■To answer a call

Press (DIGITAL!SP-PHONE), then talk into the MIC (microphone).

Caller ID Service

This unit is compatible with a Caller ID service offered by your telephone

company.

After subscribing to a Caller ID service, the calling party’s information will be

shown on the handset display after the first ring.

The unit can record information of up to 30 different callers in the caller list.

The Caller List information is sorted from the most recent to the oldest call.

When the unit receives the 31st call, the oldest call is deleted.

If your unit is connected to a PBX system which does not support Caller ID

services, you cannot access those services. Please consult your equipment

supplier.

–10–

Automatic Answering Operation

■ How to use the mailboxes

The unit accommodates three mailboxes (Mailbox 1, 2 and 3). A caller can

leave a message in a specified mailbox. If a mailbox is not specified,

messages are recorded in the mailbox 1.

■ When a caller calls

The caller can select a mailbox by pressing (#) and (1) (Mailbox 1), pressing

(#) and (2) (Mailbox 2) or pressing (#) and ( ) (Mailbox 3), while the greeting is

played. The caller can then record a message in the mailbox after a beep.

The caller waits until the greeting finishes, and records a message after a

beep. The message will be recorded in the Mailbox 1.

■ Setting the unit to answer calls

Press (ANSWER!ON) to turn on the answering system.

•The indicator lights and “Answer set”is heard.

Listening to Messages

You can see the total number of recorded messages on the base unit display.

If the ANSWER ON indicator flashes and the mailbox icon(s) ( ,

and ) flash(es) on the display, new messages have been recorded in

the mailbox(es).

To listen to the messages, press (MAILBOX!1), (MAILBOX!2) or (MAILBOX! ).

•When you have new messages, the unit announces the number of new

messages and plays them back.

•When you have no new messages, the unit plays back all recorded

messages.

BOX 3

BOX 2BOX 1

Andere Handbücher für KX-TG2730S - 2.4 GHz DSS Expandable Cordless...

Inhaltsverzeichnis

Andere Panasonic Schnurloses Telefon Handbücher

Panasonic

Panasonic KX-TGA273S - Cordless Extension Handset Bedienungsanleitung

Panasonic

Panasonic KX-TC1450 - Cordless Phone - Operation Bedienungsanleitung

Panasonic

Panasonic KX-TD7895 - Digital Spread Spedtrum... Bedienungsanleitung

Panasonic

Panasonic ET-PLF10 Bedienungsanleitung

Panasonic

Panasonic KX-TG1811NZ Bedienungsanleitung

Panasonic

Panasonic KX-TCA181EX Bedienungsanleitung

Panasonic

Panasonic KX-TG1611BX Bedienungsanleitung

Panasonic

Panasonic KX-TG4025 Bedienungsanleitung

Panasonic

Panasonic KX-TG7731C Bedienungsanleitung

Panasonic

Panasonic KX-TG6711NZ Bedienungsanleitung

Panasonic

Panasonic KX-TC1713CB Bedienungsanleitung

Panasonic

Panasonic KX-TGD890 Bedienungsanleitung

Panasonic

Panasonic KX-TC1709LBB Bedienungsanleitung

Panasonic

Panasonic KX-TG2340JXS Bedienungsanleitung

Panasonic

Panasonic KX-TH1211 Bedienungsanleitung

Panasonic

Panasonic KX-TG6611E Bedienungsanleitung

Panasonic

Panasonic KX-T2373FXW Bedienungsanleitung

Panasonic

Panasonic KX-TG5621 Bedienungsanleitung

Panasonic

Panasonic EB-GD93 Bedienungsanleitung

Panasonic

Panasonic KXTC910DB - CORDLESS 900 ANALOG Bedienungsanleitung

Panasonic

Panasonic KX-TCD952EB Bedienungsanleitung

Panasonic

Panasonic KX-TG7731S Bedienungsanleitung

Panasonic

Panasonic KX-TCD202E Bedienungsanleitung

Panasonic

Panasonic KX-TCD210FX Bedienungsanleitung

Beliebte Schnurloses Telefon Handbücher anderer Marken

3Com

3Com NBX Bedienungsanleitung

BT FREESTYLE 3200 Bedienungsanleitung

AT&T

AT&T CL84102 Bedienungsanleitung

BREZZICNI

BREZZICNI CL-3622 Bedienungsanleitung

Sanyo

Sanyo CLT-J70 Bedienungsanleitung

Amplicomms

Amplicomms BigTel 201 Bedienungsanleitung

GE 26992 Bedienungsanleitung

AT&T

AT&T E1812B Bedienungsanleitung

Sanyo

Sanyo CLT-670 Bedienungsanleitung

GE 15432970 Bedienungsanleitung

Curtis

Curtis TC595 Bedienungsanleitung

Gigaset

Gigaset Gigaset 3000 Micro Bedienungsanleitung

Poly

Poly VVX D230 Einrichtungshandbuch

AT&T

AT&T 7625 Bedienungsanleitung

GE 27930 Bedienungsanleitung

Radio Shack

Radio Shack 43-3557 Bedienungsanleitung

Uniden

Uniden D1785 Series Bedienungsanleitung

Binatone

Binatone Style 1820 Bedienungsanleitung