Panasonic KX-TG8220FX Bedienungsanleitung

PQQW15784ZA DC0707PS0 FX-2

This unit is designed to be used in Czech, Slovakia, and central Europe. To use this unit

in your country, first change the unit’s region setting to match your country. Change the

unit’s display language as needed. Refer to “Changing the unit’s region setting” in the

operating instructions.

Routine care

LTo clean the product, use a dry soft cloth. The outer surface of the product can

be scratched by wiping or rubbing with a hard cloth.

Connections

Important:

LIf you use a telephone line cord which is not supplied, the unit may not work

properly.

To telephone line

USE ONLY the supplied cord.

USE ONLY the supplied AC adaptor.

“Click”

(220–240 V, 50 Hz)

Hooks

Base unit Press plug firmly.

(220–240 V, 50 Hz)

USE ONLY the supplied AC adaptor (smaller).

Hooks

Press plug firmly.

(KX-TG8202)

Charger

Digital Cordless Phone

Model No. KX-TG8200FX/KX-TG8202FX

Digital Cordless Answering System

Model No. KX-TG8220FX

Quick Guide

TG8200_8220FX(e-e)_QG.fm Page 1 Monday, July 9, 2007 7:18 PM

– 2 –

Battery installation/Battery charge

Initial charge: 7 hours

Note:

LUSE ONLY rechargeable Ni-MH batteries.

LDo NOT use Alkaline/Manganese/Ni-Cd batteries.

Screen saver mode

The backlight will turn off completely after 1 minute

of inactivity if the handset is not on the base unit or

charger.

Press {ih} to turn the display on again.

Base unit *1 Charger *2

*1 The pictured model is KX-TG8200.

*2 KX-TG8202

Rechargeable

Ni-MH ONLY

“Charging” will

be displayed.

{ih}

TG8200_8220FX(e-e)_QG.fm Page 2 Monday, July 9, 2007 7:18 PM

– 3 –

Operating tips

Using the joystick

Push the joystick up, down, left, or right to navigate

through menus and to select.

Note:

LWhen selecting menu or the desired item, these

operating instructions use the following indication.

Example: {^}/{V}: “Off”

Push the joystick up or down to select the words in

quotations.

Adjusting the receiver or speaker

volume

Push the joystick up or down while on a call.

Soft keys

The handset features 2 soft keys and a joystick. By

pressing a soft key, or by pressing the centre of the

joystick, you can select the feature shown directly

above it on the display.

Menu icons

When in standby mode, pressing down on the centre of the joystick reveals the

handset’s main menu. From here you can access various features and settings.

*1 KX-TG8200/KX-TG8202

*2 KX-TG8220

Volume up

Volume down

jCaller List

XSMS (Short Message Service)

KTime Settings*1

IAnswer System*2

NHandset Setup

|Base Unit Setup

MDisplay Setup

TG8200_8220FX(e-e)_QG.fm Page 3 Monday, July 9, 2007 7:18 PM

– 4 –

Display language

16 display languages are available.

1{ih} i"

2Select Nby pushing the joystick in any direction. i#

3Push the joystick up or down to select “Display Setup”. i#

4Push the joystick up or down to select “Select Language”. i#

5Push the joystick up or down to select the desired language. i#i{ih}

Dialling mode (tone/pulse)

1"(centre of joystick)

2Select |by pushing the joystick in any direction. i#

3Push the joystick up or down to select “Call Options”. i#

4Push the joystick up or down to select “Dial Mode”. i#

5Push the joystick up or down to select the desired setting. i#i{ih}

Date and time

1"(centre of joystick)

2Select Nby pushing the joystick in any direction. i#

3Push the joystick up or down to select “Time Settings”. i#

4Push the joystick up or down to select “Set Date & Time”. i#

5Enter the current date, month, and year.

6Enter the current hour and minute.

7#i{ih}

You can select

“Deutsch

Deutsch

”,

“English

English

”,“Magyar

Magyar

”,

“Polski

Polski

”,“SlovenČina”,

“ČeŠtina

tina

”,

“Hrvatski

Hrvatski

”,

“Slovenscina

Slovenscina

”,

“Eesti

Eesti

”,“LIETUVI

LIETUVI

ŠKAI

KAI

”,

“Latvie

Latvie

Šu”,

“Rom

Rom

ânã”,

“БЪЛГАРСКИ”,

“Srpski

Srpski

”,

“МАКЕДОНСКИ”, or

, or

“Shqip

Shqip

”.

TG8200_8220FX(e-e)_QG.fm Page 4 Monday, July 9, 2007 7:18 PM

– 5 –

Basic operations

CMaking/Answering calls (Handset)

Making calls Dial the phone number. i{C}/{s}

Answering calls {C}/{s}

Hanging up {ih}

Receiver/speaker volume Push the joystick up or down while on a call.

Making a call using the redial

list

j(right soft key) i{^}/{V}: Select the desired

number. i{C}/{s}

Temporary tone dialling

(for rotary/pulse service

users)

1Make a call.

2Press {*} when prompted to enter your code or

PIN, then press the appropriate dial keys.

Handset ringer volume 1"(centre of joystick) iNi#

2{^}/{V}: “Ringer Setup”i#

3{^}/{V}: “Ringer Volume”i#

4{^}/{V}: Select the desired volume. i#i

{ih}

kPhonebook (Handset)

Adding entries (names and

phone numbers)

1n(left soft key) i"

2{^}/{V}: “New Entry”i#

3Enter the party’s name (16 characters max.). i

4Enter the party’s phone number (24 digits max.).

5{^}/{V}: Select the desired category. i#

6{^}/{V}: “Save”i#i{ih}

LTo enter a name, see the character table in the

operating instructions.

Making calls 1n(left soft key)

2{^}/{V}: Select the desired entry. i{C}

IAnswering system (Base unit): KX-TG8220

Answering on/off Press {s}to turn on/off the answering system.

Listening to messages {6}

TG8200_8220FX(e-e)_QG.fm Page 5 Monday, July 9, 2007 7:18 PM

– 6 –

Frequently asked questions

Question Cause & solution

Why is wflashing? LThe handset is too far from the base unit. Move

closer.

LThe base unit AC adaptor is not connected.

Check the connections.

LYou are using the handset or base unit in an area

with high electrical interference. Place the

handset and base unit away from interference

sources, such as antennas and mobile phones.

LThe handset is not registered to the base unit.

Why can I not make calls? LThe dialling mode setting is incorrect. Set to

“Tone”or “Pulse”as needed.

Why is the handset display

blank?

LThe handset is in screen saver mode. Press

{ih} to activate the handset display again.

What should I do when the

handset does not turn on?

LMake sure that the batteries are installed

correctly.

LFully charge the batteries.

LClean the charge contacts and charge again.

How long is the battery

operating time?

LWhen you are using fully-charged Ni-MH batteries

(supplied batteries);

In continuous use: 12 hours max.

In continuous standby mode: 150 hours max.

LIt is normal for batteries not to reach full capacity

at the initial charge. Maximum battery

performance is reached after a few complete

cycles of charge/discharge (use).

LActual battery performance depends on a

combination of how often the handset is in use

and how often it is not in use (standby).

TG8200_8220FX(e-e)_QG.fm Page 6 Monday, July 9, 2007 7:18 PM

– 7 –

Can I keep the handset on

the base unit or charger

when I am not using it?

LEven after the handset is fully charged, the

handset can be left on the base unit or charger

without any ill effect on the batteries.

When should I replace the

batteries?

LIf the batteries are fully charged until

displayed, but

)

is displayed after a few calls,

replace the batteries with new ones.

What is a PIN? LThe PIN is a 4-digit number that must be entered

in order to change certain base unit settings. The

default PIN is “0000”.

What do I need to do to

display caller information?

LYou need to subscribe to Caller ID service.

Consult your service provider/telephone company

for details.

LThe message “You must first subscribe

to Caller ID.” will be displayed until you

receive caller information after subscribing to

Caller ID service.

What should I do when:

– I hear static or sound cuts

in and out?

– there is interference from

other electrical units?

LPlace the handset and the base unit away from

other electrical appliances.

LMove closer to the base unit.

LYour unit is connected to a telephone line with

DSL service. We recommend connecting a filter

(contact your DSL service provider) to the

telephone line between the base unit and the

telephone line jack.

What should I do when the

operating time seems to be

short even after I fully

charged the batteries?

LWipe the battery ends (S, T) and the unit

contacts with a dry cloth.

What do I need to do to

erase W(Missed call) from

the display?

LThere are unviewed missed calls remaining. View

them using the following method.

1"(centre of joystick) iji#

2Push the joystick down to search from the most

recent call, or push the joystick up to search

from the oldest call.

Frequently asked questions

Question Cause & solution

TG8200_8220FX(e-e)_QG.fm Page 7 Monday, July 9, 2007 7:18 PM

– 8 –

Registering a handset to a base unit

The supplied handset and base unit are pre-registered. When you purchase an

additional handset, refer to the additional handset’s installation manual for

registration. If for some reason the handset is not registered to the base unit, register

the handset.

1"(centre of joystick) iNi#

2{^}/{V}: “Registration”i#

3{^}/{V}: “Register H.set”i#

4{^}/{V}: Select a base unit number. i#

5Proceed with the operation for your model.

NKX-TG8200/KX-TG8202

Press and hold {x} on the base unit for

about 5 seconds. (No registration tone)

NKX-TG8220

Press and hold {x} on the base unit for

about 5 seconds, until the registration tone

sounds.

6Wait until “Enter Base PIN”is displayed.

iEnter the base unit PIN (default: “0000”).

{x}

TG8200_8220FX(e-e)_QG.fm Page 8 Monday, July 9, 2007 7:18 PM

– 9 –

Optional service (Caller ID and SMS)

If you subscribe to Caller ID service, you can:

– display caller information

– identify who is calling by using different display colours and

ringtones (handset phonebook category)

To use SMS, you must subscribe to Caller ID and/or appropriate service.

– SMS (Short Message Service)

012345

TG8200_8220FX(e-e)_QG.fm Page 9 Monday, July 9, 2007 7:18 PM

– 10 –

TG8200_8220FX(e-e)_QG.fm Page 10 Monday, July 9, 2007 7:18 PM

Andere Handbücher für KX-TG8220FX

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Panasonic Schnurloses Telefon Handbücher

Panasonic

Panasonic KX-TGC210 Bedienungsanleitung

Panasonic

Panasonic KX-TG4381AL Bedienungsanleitung

Panasonic

Panasonic KX-TGA670C Bedienungsanleitung

Panasonic

Panasonic KX-TG9542 Bedienungsanleitung

Panasonic

Panasonic GLOBARANGE BB-GT1500E Bedienungsanleitung

Panasonic

Panasonic KXTC1501W Bedienungsanleitung

Panasonic

Panasonic KX-TG5921NZ Bedienungsanleitung

Panasonic

Panasonic VE-GD55DL Bedienungsanleitung

Panasonic

Panasonic KX-TG1837AL Bedienungsanleitung

Panasonic

Panasonic KX-TG7842C Bedienungsanleitung

Panasonic

Panasonic KX-TG7341FX Bedienungsanleitung

Panasonic

Panasonic KX-TC187B Bedienungsanleitung

Panasonic

Panasonic KX-TG1105RUS Bedienungsanleitung

Panasonic

Panasonic KX-TG6811E Bedienungsanleitung

Panasonic

Panasonic KXTCC912B - CORDLESS 900 ANALOG Bedienungsanleitung

Panasonic

Panasonic KX-TCD300FX Bedienungsanleitung

Panasonic

Panasonic ET-PLF10 Bedienungsanleitung

Panasonic

Panasonic KX-TG1855AL Bedienungsanleitung

Panasonic

Panasonic KX-TG2551CS Bedienungsanleitung

Panasonic

Panasonic KXTGA420B - 2.4 Ghz Cordless Station Unit Bedienungsanleitung

Panasonic

Panasonic KX-TG6481? Bedienungsanleitung

Panasonic

Panasonic KX-TG1611E Bedienungsanleitung

Panasonic

Panasonic KX-TG2267B - GigaRange - 2.4 GHz Digital Cordless... Bedienungs- und Montageanleitung

Panasonic

Panasonic KX-TD7690C Bedienungsanleitung

Beliebte Schnurloses Telefon Handbücher anderer Marken

3Com

3Com NBX Bedienungsanleitung

BT FREESTYLE 3200 Bedienungsanleitung

AT&T

AT&T CL84102 Bedienungsanleitung

BREZZICNI

BREZZICNI CL-3622 Bedienungsanleitung

Sanyo

Sanyo CLT-J70 Bedienungsanleitung

Amplicomms

Amplicomms BigTel 201 Bedienungsanleitung

GE 26992 Bedienungsanleitung

AT&T

AT&T E1812B Bedienungsanleitung

Sanyo

Sanyo CLT-670 Bedienungsanleitung

GE 15432970 Bedienungsanleitung

Curtis

Curtis TC595 Bedienungsanleitung

Gigaset

Gigaset Gigaset 3000 Micro Bedienungsanleitung

Poly

Poly VVX D230 Einrichtungshandbuch

AT&T

AT&T 7625 Bedienungsanleitung

GE 27930 Bedienungsanleitung

Radio Shack

Radio Shack 43-3557 Bedienungsanleitung

Uniden

Uniden D1785 Series Bedienungsanleitung

Binatone

Binatone Style 1820 Bedienungsanleitung