Panasonic PalmTheater DVD-LV60 Bedienungsanleitung

ORDERNO.ODSD010847C3

PortableDVDAUDIO/VIDEO PLAYER

DVD-LV60

Colour

(S).................Silver Type

Areas

GK..................China.

SPECIFICATIONS

Specifications

Power supply: DC 9V (DC IN terminal) /

DC 7.2V (Exclusivebattery

terminal)

Power consumption: 14W(8W: Unit only)

AC adaptor

Power source: AC 100-240V, 50/60Hz

Power consumption: 30W

DC output: 9V, 2A

Dimensions: 159(W) x140(D) x27(H) mm

(whentheLCD screenisclosed,

excluding protrusions)

Mass: 510g

Operating temperature

range: 5-35°C

Operating humidityrange: 5-90%RH (no condensation)

Region number: Region No.6

Signal system: PAL625/50,PAL525/60,

NTSC (Selectable)

Discs played:

(1)DVD disc

(2)Compact disc (CD-DA, VideoCD)

(3) CD-R/CD-RW(CD-DA, VideoCD formatteddiscs)

LCD screen: 5.8” -Si, TFT wide-screenLCD

S videooutput:

Y output level: 1Vp-p(75 )

C output level: 0.286Vp-p(75 ) (NTSC)

0.3Vp-p(75 ) (PAL)

Output terminal: Alsousedforvideooutput/input

Videooutput/input:

Output/input level: 1Vp-p(75 )

Output/input terminal: Mini-jack

(1system, Output/input selectable)

Audiooutput/input:

Output/input level: 1.5Vrms (1kHz, 0dB)

Output/input terminal:

2ch(MIX) Output (L/R):Stereomini-jack / (1system, Output

/input selectable)

Audiosignal output characteristics:

(1)Frequencyresponse:

DVD (linear audio): 4Hz-22kHz (48kHz sampling)

4Hz-44kHz (96kHz sampling)

CD audio: 4Hz-20kHz

(2)S/N ratio:

CD audio: 115dB

(3)Dynamicrange:

CD audio: 97dB

Digital audiooutput:

Optical digital output: Mini optical terminal

(Alsousedforaudiooutput/input)

Pickup:

Wavelength: 660nm/ 780nm

Laser power: CLASS 2/ CLASS 1

Note

Specificationsare subject tochangewithout notice.

Mass and dimensionsare approximate.

Power consumption instandbymode:1.5W(whenusing the

includedAC adaptor)

Unauthorized copying and distribution isaviolation of law.

1. SAFETY PRECAUTIONS

1.1. GENERALGUIDELINES

1. When servicing, observe the original lead dress. Ifashort circuit

isfound, replace all parts which have been overheated or

damaged bythe short circuit.

2. After servicing, see to itthat all the protective devices such as

insulation barriers, insulation papers shields are properly

installed.

3. After servicing, make the following leakage current checks to

prevent the customer from being exposed to shock hazards.

1.1.1. LEAKAGE CURRENTCOLD CHECK

1. Unplug the AC cord and connect ajumper between the two

prongs on the plug.

2. Measure the resistance value, with an ohmmeter, between the

jumpered AC plug and each exposed metalliccabinet part on the

equipment such as screwheads, connectors, control shafts, etc.

When the exposed metallicpart has areturn path to thechassis,

the reading shouldbe between 1M and 5.2M . / When the

exposed metal does not have areturn path to the chassis, the

reading must be .

Figure 1

1.1.2. LEAKAGE CURRENTHOTCHECK (See Figure 1 .)

1. Plug the AC cord directlyinto the AC outlet. Donot use an

isolation transformer for thischeck.

2. Connect a1.5k , 10 watts resistor, inparallel with a0.15 F

capacitors, between each exposed metallicpart on the set and a

good earth ground such as awater pipe, as shownin Figure 1 .

3. Use an AC voltmeter, with 1000 ohms/voltor more sensitivity, to

measure the potential across the resistor.

4. Check each exposed metallicpart, and measure the voltage at

each point.

5. Reverse the AC plug inthe AC outlet and repeat each of the above

measurements.

6. The potential at anypoint shouldnot exceed 0.75 volts RMS. A

leakage current tester (Simpson Model 229 or equivalent) maybe

used to make the hot checks, leakage current must not exceed 1/2

milliamp. Incase ameasurement isoutsideof the limits specified,

there isapossibilityof ashock hazard, and the equipment should

be repaired and rechecked before itisreturned to the customer.

2. PREVENTION OF ELECTRO STATIC DISCHARGE

(ESD) TO ELECTROSTATICALLY SENSITIVE (ES)

DEVICES

Some semiconductor(solidstate) devices canbe damagedeasilybystatic electricity. Such

components commonlyare calledElectrostaticallySensitive (ES) Devices. Examples of typical

ES devices are integratedcircuits and some field-effect transistorsand semiconductor"chip"

components. The following techniques shouldbe usedtohelpreduce the incidence of

component damage causedbyelectrostatic discharge (ESD).

1. Immediatelybefore handling anysemiconductor component or

semiconductor-equipped assembly, drainoff anyESDon your

bodybytouching aknownearth ground. Alternatively, obtainand

wear acommerciallyavailabledischargingESDwrist strap, which

shouldbe removed for potential shock reasons prior to applying

power to the unitunder test.

2. After removing an electrical assemblyequipped with ES devices,

place the assemblyon aconductive surface such as alminum foil,

to prevent electrostaticcharge buildup or exposure of the

assembly.

3. Use onlyagrounded-tipsoldering iron to solder or unsolder ES

devices.

4. Use onlyan anti-staticsolder removal device. Some solder

removal devices not classified as "anti-static(ESDprotected)"

can generate electrical charge sufficient to damage ES devices.

5. Donot use freon-propelled chemicals. These can generate

electrical charges sufficient to damage ES devices.

6. Donot remove areplacement ES device from its protective

package until immediatelybefore you are readyto install it. (Most

replacement ES devices are packaged with leads electrically

shorted together byconductive foam, alminum foil or comparable

conductivematerial).

7. Immediatelybefore removing the protective material from the

leads of areplacement ES device, touch the protective material to

the chassisor circuitassemblyinto which the device will be

installed.

Caution

Besure no power isapplied to the chassisor circuit, and observe

all other safetyprecautions.

8. Minimize bodilymotions when handling unpackaged replacement

ES devices. (Otherwise hamless motion such as the brushing

together of your clothes fabricor the lifting of your foot from a

carpeted floor can generate staticelectricity(ESD)sufficient

todamage an ES device).

3. PRECAUTION OF LASER DIODE

4. HANDLING PRECAUTIONS FOR TRAVERSE DECK

The laserdiode inthe optical pickup maybreak downdue topotential difference causedby

static electricityof clothes orhumanbody.

Sobe careful of electrostatic break downduring repairof the optical pickup.

4.1. Handling of optical pickup

1. Donot subject the optical pickup to staticelectricityas itis

extremelysensitive to electrical shock.

2. To prevent the breakdownof the laser diode, an antistatic

shorting pinisinserted into the flexibleboard (FPCBoard). /

When removing or connecting the short pin, finish the job inas

short times as possible.

3. Becareful not to applyexcessive stress to the flexibleboard (FPC

Board).

4. Donot turn the variableresistor (Laser power adjustment). / Ithas

alreadybeen adjusted.

4.2. Grounding for electrostaticbreakdownprevention

1. Human bodygrounding / Use the antistaticwrist strap to

discharge the staticelectricityfrom your body.

2. Work tablegrounding / Put aconductive material (sheet) or steel

sheet on the area where the optical pickup isplaced and ground

the sheet.

Caution

The staticelectricityof your clothes will not be grounded through

the wrist strap. So take care not to let your clothes touch the

optical pickup.

5. Handling Precautions

Confirm the status of the following buttons and switches before using this unit.

5.1. The input/output selector button

5.2. The ON/OFF, HOLDswitch

6. Self-diagnosis function and service mode

6.1. Service Precautions

6.1.1. Recoveryafterthe dvd playerisrepaired

6.1.2. Firmwareversion-up of the DVD player

6.2. Handling After Completing Repairs

Use the following procedure aftercompleting repairs.

6.2.1. Precautions

Donot disconnect the powerplug fromthe outlet withthe traystill open, thenclose the tray

manually.

6.3. Lens cleaning

Use the lens cleanersoldseparatelywhencleaning the lens.

Part Number: RP-CL510 (Available fromthe AudioGroup)

6.4. UHFdisplays

Use the internal service mode forevaluation of malfunctions.

DisplayMethod Display Diagnosis

Items displayedwheninuse CHECK THE

DISC Focus error

H01 Innercovertrouble

H02 Spindle servoerror

H03 Traverse error

H04 Tracking servoerror

H05 Seek error

Press the "0" button on the remote

control while holding downthe PAUSE

and PLAY buttons on the player.

The last errorcode generatedis savedin

the EEPROM

F0** Disc format error

F1** Disc code error

F2** DecoderLSI error

F5** DSC

F6** ECC error

F7** Microcomputererror

F8** Microcomputererror

6.5. Self-diagnosisFunction and Service Modes

6.6. Service mode table

Pressing various button combinations on the playerand remote control unit canactivate the

service modes.

Andere Handbücher für PalmTheater DVD-LV60

Inhaltsverzeichnis

Andere Panasonic DVD-Player Handbücher

Panasonic

Panasonic CXDVP292U - CAR DVD PLAYER Bedienungsanleitung

Panasonic

Panasonic PalmTheater DVD-L50 Bedienungsanleitung

Panasonic

Panasonic DVD-XP50S Operating Bedienungsanleitung

Panasonic

Panasonic DVD-A115U Bedienungsanleitung

Panasonic

Panasonic DVD-K32 Bedienungsanleitung

Panasonic

Panasonic DVD-S325 Bedienungsanleitung

Panasonic

Panasonic DVD-RV21 Bedienungsanleitung

Panasonic

Panasonic DVD-S42EE Bedienungsanleitung

Panasonic

Panasonic DVD Home Theatre System Bedienungsanleitung

Panasonic

Panasonic DVD-F87 Bedienungsanleitung

Panasonic

Panasonic DVD-S42EE Bedienungsanleitung

Panasonic

Panasonic DVD-S700EG-K Bedienungsanleitung

Panasonic

Panasonic DoubleFeature PV-D4734S Bedienungsanleitung

Panasonic

Panasonic DVD-S54 Bedienungsanleitung

Panasonic

Panasonic DVD-S54 Bedienungsanleitung

Panasonic

Panasonic PVD734S - DVD/VCR DECK Bedienungsanleitung

Panasonic

Panasonic DVDS58 - DVD/CD PLAYER - MULTI LANGUAGE Bedienungsanleitung

Panasonic

Panasonic CQ-DVR909N Bedienungsanleitung

Panasonic

Panasonic PVD4735S - DVD/VCR DECK Bedienungsanleitung

Panasonic

Panasonic PalmTheater DVD-LV75 Bedienungsanleitung

Panasonic

Panasonic DMPBD10A - BD/DVD PLAYER Bedienungsanleitung

Panasonic

Panasonic DVD-A360A Bedienungsanleitung

Panasonic

Panasonic DVD-S500EB Bedienungsanleitung

Panasonic

Panasonic DVDRP82 - DIG. VIDEO DISC PLAY Bedienungsanleitung

Beliebte DVD-Player Handbücher anderer Marken

Sony

Sony DVP-F11 Bedienungsanleitung

LENCO

LENCO DVP-740 X2 Bedienungsanleitung

JVC

JVC XV-N650BEU Bedienungsanleitung

Aiwa

Aiwa XD-DV370 Bedienungsanleitung

MedeaWiz

MedeaWiz Sprite 4K DV-S4 Bedienungsanleitung

Denon

Denon DVM-1805 - DVD Changer Bedienungsanleitung

Toshiba

Toshiba SD-3815 Bedienungsanleitung

Tevion

Tevion 44330 Bedienungsanleitung

Samsung

Samsung DVD-HD860 Bedienungsanleitung

Sylvania

Sylvania DP170SL8 Bedienungsanleitung

Toshiba

Toshiba SD-P1200 Bedienungsanleitung

Dolby Laboratories

Dolby Laboratories CP650 Bedienungsanleitung

Philips

Philips DVD737K/931 Bedienungsanleitung

Denon

Denon DVD-5900 Bedienungsanleitung

Philips

Philips DVD 951 Bedienungsanleitung

Philips

Philips DVDR3460 Bedienungsanleitung

Sony

Sony DVP-SR201P Bedienungsanleitung

Toshiba

Toshiba SD-V394SU Bedienungsanleitung