Panasonic KX-TGDA99 Bedienungsanleitung

Installation Manual

Additional Bluetooth Cordless Handset

Model No. KX-TGDA99

Thank you for purchasing a Panasonic product.

This unit is an additional handset compatible with the following series of

Panasonic Digital Cordless Phone:

– KX-TGD890/KX-TG3890

– KX-TGF890

(The corresponding models are subject to change without notice.)

You must register this handset with your base unit before it can be used. This

installation manual describes only the steps needed to register and begin using

the handset. Please read the base unit’s operating instructions for further details.

Please read this installation manual before using the unit and save it for future

reference.

For assistance, visit our Web site: http://shop.panasonic.com/support

for customers in the U.S.A.

Printed in Malaysia PNQX9209ZA PP0122YM0

KX-TGDA99_0110_ver001.pdf 1 10/1/2021 7:56:45 AM

Accessory information

Supplied accessories

Accessory item/Part number Quantity

Charger/PNLC1077ZS 1

Rechargeable batteries/HHR-4DPA 2

Handset cover/PNYNTGDA99SR*1 1

*1 The handset cover comes attached to the handset.

Note:

RPlease read the base unit’s operating instructions for additional/replacement

accessories.

RPlease read “Graphical symbols for use on equipment and their descriptions” of

the base unit’s operating instructions.

Bluetooth® devices

You can expand your phone system by pairing the Bluetooth headset to the

handset.

Your Bluetooth headset*1: 4 max.

*1 Your headset must be Bluetooth wireless technology compatible. For more

details and the list of compatible headset, please visit our Web site:

http://shop.panasonic.com/bluetooth-phone

Trademarks

RThe Bluetooth® word mark and logos are registered trademarks owned by

Bluetooth SIG, Inc. and any use of such marks by Panasonic Corporation is

under license.

2For assistance, please visit http://shop.panasonic.com/support

Installation

KX-TGDA99_0110_ver001.pdf 2 10/1/2021 7:56:45 AM

For your safety

To prevent severe injury and loss of life/property, read this section carefully before

using the product to ensure proper and safe operation of your product.

WARNING

Power connection

RCompletely insert the AC adaptor/power plug into the power outlet. Failure to do

so may cause electric shock and/or excessive heat resulting in a fire.

RRegularly remove any dust, etc. from the AC adaptor/power plug by pulling it

from the power outlet, then wiping with a dry cloth. Accumulated dust may cause

an insulation defect from moisture, etc. resulting in a fire.

RUnplug the product from power outlets if it emits smoke, an abnormal smell, or

makes an unusual noise. These conditions can cause fire or electric shock.

Confirm that smoke has stopped emitting and contact us at

http://shop.panasonic.com/support

Installation

RTo prevent the risk of fire or electrical shock, do not expose the product to rain

or any type of moisture.

RDo not place or use this product near automatically controlled devices such as

automatic doors and fire alarms. Radio waves emitted from this product may

cause such devices to malfunction resulting in an accident.

RDo not place the handset on the base unit when battery cover is removed.

CAUTION

Installation and location

RThe AC adaptor is used as the main disconnect device. Ensure that the AC

outlet is installed near the product and is easily accessible.

RThe product is only use for mounting at heights £ 2 m.

Note:

RThis height is not guaranteed for product reliability.

RTo prevent serious injuries due to the product unexpectedly falling, the

product must be installed at a height of 1.5 m or lower.

For assistance, please visit http://shop.panasonic.com/support 3

Installation

KX-TGDA99_0110_ver001.pdf 3 10/1/2021 7:56:45 AM

Battery

RWe recommend using the supplied batteries or additional/replacement batteries

noted on page 2 for replacement battery information. USE ONLY rechargeable

Ni-MH batteries AAA (R03) size.

RDo not mix old and new batteries.

RDo not open or mutilate the batteries. Released electrolyte from the batteries is

corrosive and may cause burns or injury to the eyes or skin. The electrolyte is

toxic and may be harmful if swallowed.

RExercise care when handling the batteries. Do not allow conductive materials

such as rings, bracelets, or keys to touch the batteries, otherwise a short circuit

may cause the batteries and/or the conductive material to overheat and cause

burns.

RCharge the batteries provided with or identified for use with this product only, in

accordance with the instructions and limitations specified in this manual.

ROnly use a compatible base unit (or charger) to charge the batteries. Do not

tamper with the base unit (or charger). Failure to follow these instructions may

cause the batteries to swell or explode.

RAvoid the use in the following conditions:

– High or low extreme temperatures during use, storage or transportation.

– Replacement of a battery with an incorrect type that can defeat a safeguard.

– Disposal of a battery into fire or a hot oven, or mechanically crushing or

cutting of a battery, that can result in an explosion.

– Extremely high temperature and/or extremely low air pressure that can result

in an explosion or the leakage of flammable liquid or gas.

Attention:

A nickel metal hydride battery that is

recyclable powers the product you have

purchased.

Please call 1-800-8-BATTERY

(1-800-822-8837) for information on how

to recycle this battery.

Important safety instructions

When using your product, basic safety precautions should always be followed to

reduce the risk of fire, electric shock, and injury to persons, including the following:

1. Do not use this product near water for example, near a bathtub, washbowl,

kitchen sink, or laundry tub, in a wet basement or near a swimming pool.

2. Do not use the telephone to report a gas leak in the vicinity of the leak.

4For assistance, please visit http://shop.panasonic.com/support

Installation

KX-TGDA99_0110_ver001.pdf 4 10/1/2021 7:56:45 AM

3. Use only the power cord and batteries indicated in this manual. Do not dispose

of batteries in a fire. They may explode. Check with local codes for possible

special disposal instructions.

SAVE THESE INSTRUCTIONS

Other information

RThe applied nameplate is located at the bottom or rear of the product.

ROperating the product near electrical appliances may cause interference. Move

away from the electrical appliances.

CAUTION: Risk of explosion if battery is replaced by an incorrect type. Dispose

of used batteries according to the instructions.

Routine care

RWipe the outer surface of the product with a soft moist cloth.

RDo not use benzine, thinner, or any abrasive powder.

Notice for product disposal, transfer, or return

RThis product can store your private/confidential information. To protect your

privacy/confidentiality, we recommend that you erase information such as

phonebook or caller list entries from the memory before you dispose of, transfer,

or return the product.

Specifications

RStandard:

Bluetooth wireless technology 4.2

– Hands Free Profile (HFP)

RFrequency range:

1.92 GHz to 1.93 GHz (DECT)

2.402 GHz to 2.48 GHz (Bluetooth)

RRF transmission power:

115 mW (max.)

RPower source:

120 V AC, 60 Hz

RPower consumption:

Standby: 0.1 W

Maximum: 1.8 W

ROperating conditions:

0 °C – 40 °C (32 °F – 104 °F), 20 % – 80 % relative air humidity (dry)

For assistance, please visit http://shop.panasonic.com/support 5

Installation

KX-TGDA99_0110_ver001.pdf 5 10/1/2021 7:56:45 AM

Setting up

Connections/Wall mounting

Connect the AC adaptor to the power outlet.

Drive the screws (

) (not supplied) into the wall, if necessary.

27.2 mm (1 1/16 inches)

Note:

RThe AC adaptor must remain connected at all times. (It is normal for the adaptor

to feel warm during use.)

RMake sure that the wall and the fixing method are strong enough to support the

weight of the unit.

Battery installation/Battery charging

Important:

RUse the supplied rechargeable batteries. For replacement, we recommend using

the Panasonic rechargeable batteries noted on page 2.

RUSE ONLY rechargeable Ni-MH batteries AAA (R03) size (

RDo NOT use alkaline/manganese/Ni-Cd batteries.

RConfirm correct polarities ( , ).

Charge for about 7 hours.

RConfirm “Charging” is displayed (

RWhen the batteries are fully charged, “Fully charged” is displayed.

6For assistance, please visit http://shop.panasonic.com/support

Installation

KX-TGDA99_0110_ver001.pdf 6 10/1/2021 7:56:45 AM

Note:

RIf the batteries are fully charged, but the operating time seems to be shorter,

clean the battery ends ( , ) and the charge contacts with a dry cloth and

charge again.

Removing the battery

Registering a handset to a base unit

1Base unit:

Press and hold MLOCATORN for about 5 seconds.

RIf all registered handsets start ringing, press MLOCATORN again to stop,

then repeat this step.

2Handset:

Place the handset on the base unit or charger, then wait until a long beep

sounds and is displayed.

Note:

RIf an error tone sounds, or if is displayed, register the handset according to

the base unit’s operating instructions.

Display language

1MMENUN#110

2MbN: Select the desired setting. a MSAVEN a MOFFN

Using a Bluetooth headset

By pairing a Bluetooth headset to the handset, you can enjoy hands-free

conversations when talking over a phone calls. For details about the operations,

refer to the base unit’s operating instructions.

Important:

RYour Bluetooth headset must support the Hands Free Profile (HFP) specification.

RUp to 4 Bluetooth headsets can be paired to the handset.

ROnly 1 Bluetooth headset can be used with the unit at a time.

For assistance, please visit http://shop.panasonic.com/support 7

Installation

KX-TGDA99_0110_ver001.pdf 7 10/1/2021 7:56:45 AM

RFor best performance, we recommend using your Bluetooth headset within 1 m

(3.3 feet) of the handset. The handset can communicate with Bluetooth

headsets within an approximately 10 m (33 feet) range.

Turning Bluetooth feature on/off

Once this feature is turned on, the Bluetooth MPAIRN button is enable to use and

the handset can perform other Bluetooth functions. The default setting is “Off”.

Important:

RWe recommend turning off the setting to save the battery life of your handset

when you are not using a Bluetooth headset.

1MMENUN#613

2MbN: Select the desired setting. a MSAVEN

3MOFFN

Pairing a Bluetooth headset to the handset

Important:

RMake sure that the Bluetooth headset is not connected to any other Bluetooth

device.

RRefer to the headset’s operating instructions. If your headset PIN is not “0000”,

change the Bluetooth PIN beforehand (page 10).

1Bluetooth headset:

Set your headset to pairing mode.

2Handset:

Press and hold MPAIRN for about 3 seconds.

3Wait until a long beep sounds.

RWhen the Bluetooth headset is ready for use, MN is displayed.*1

*1 Corresponding headset number is indicated next to the item.

Note:

RIn step 2, if the handset has been paired with a maximum of 4 headsets, you

can overwrite any unwanted headset by pressing MYESN a MbN: Select the

desired headset a MSELECTN.

Connecting/disconnecting a Bluetooth headset

To use your headset with another Bluetooth device, you may need to disconnect it

from the handset. If you want to use it again, reconnect the headset to the handset.

Important:

RMake sure that the headset is turned on.

8For assistance, please visit http://shop.panasonic.com/support

Installation

KX-TGDA99_0110_ver001.pdf 8 10/1/2021 7:56:45 AM

1To connect/disconnect:

Press MPAIRN a MbN: Select the desired headset a MSELECTN

2MbN: “Connect” or “Disconnect” a MSELECTN

RA long beep sounds.

3MOFFN

Note:

RA disconnected headset is not unpaired from the handset, so pairing it to the

handset again is unnecessary.

Unpairing a Bluetooth headset

You can cancel the pairing of the headset that is stored to the handset.

1Press MPAIRN a MbN: Select the desired headset. a MSELECTN

2MbN: “Unpair” a MSELECTN

3MbN: “Yes” a MSELECTN

RA long beep sounds.

4MOFFN

Changing the headset name

The name of the registered headset will be displayed while talking using a

Bluetooth headset or in the headset list. You can customize the name of registered

Bluetooth headsets.

1Press MPAIRN a MbN: Select the desired headset. a MSELECTN

2MbN: “Change name” a MSELECTN a Enter the desired name (16

characters max.).

3MSAVEN a MOFFN

Note:

RWhen the headset is unpaired, the headset name stored in the handset will be

deleted.

Connection after the call

You can set to remain or disconnect the Bluetooth headset connection after the call

has ended. The default setting is “Stay connected”.

1MMENUN#644

2MbN: Select the desired setting. a MSAVEN

3MOFFN

For assistance, please visit http://shop.panasonic.com/support 9

Installation

KX-TGDA99_0110_ver001.pdf 9 10/1/2021 7:56:45 AM

Changing the Bluetooth PIN (Personal Identification

Number)

The PIN is used to pair the headset to the handset. The default PIN is “0000”. If

your headset PIN is not “0000”, change the Bluetooth PIN beforehand.

Important:

RPlease make note of your new PIN. The unit does not reveal the PIN to you. If

you forget your PIN, please refer the base unit’s operating instruction to reset

the PIN.

1MMENUN#645

RIf the unit prompts you to enter the old PIN (When the default has been

changed), enter the current 4-digit PIN. a MOKN

2Enter the new 4-digit PIN. a MOKN

3Enter the new 4-digit PIN again. a MSAVEN a MOFFN

FCC and other information

This equipment is hearing aid compatible as defined by the FCC in 47 CFR Section

68.316.

When you hold the phone to your ear, noise might be heard in your Hearing Aid.

Some Hearing Aids are not adequately shielded from external RF (radio frequency)

energy. If noise occurs, use an optional headset accessory or the speakerphone

option (if applicable) when using this phone. Consult with your audiologist or

Hearing Aid manufacturer about the availability of Hearing Aids which provide

adequate shielding to RF energy commonly emitted by digital devices.

WHEN PROGRAMMING EMERGENCY NUMBERS AND(OR) MAKING TEST

CALLS TO EMERGENCY NUMBERS:

1) Remain on the line and briefly explain to the dispatcher the reason for the call.

2) Perform such activities in the off-peak hours, such as early morning or late

evenings.

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions:

(1) This device may not cause harmful interference, and (2) this device must

accept any interference received, including interference that may cause undesired

operation.

Privacy of communications may not be ensured when using this phone.

CAUTION:

Any changes or modifications not expressly approved by the party responsible for

compliance could void the user’s authority to operate this device.

10 For assistance, please visit http://shop.panasonic.com/support

Installation

KX-TGDA99_0110_ver001.pdf 10 10/1/2021 7:56:45 AM

Andere Handbücher für KX-TGDA99

Inhaltsverzeichnis

Andere Panasonic Mobilteil Handbücher

Panasonic

Panasonic KX-TGDA50 Bedienungsanleitung

Panasonic

Panasonic KX-TGLA40 Bedienungsanleitung

Panasonic

Panasonic KX-TGFA51 Bedienungsanleitung

Panasonic

Panasonic KX-TGA300B - Cordless Extension Handset Bedienungsanleitung

Panasonic

Panasonic KX-TGP550 T04 Bedienungsanleitung

Panasonic

Panasonic KX-TGA400B - Cordless Extension Handset Bedienungsanleitung

Panasonic

Panasonic KX-TGA685EX Bedienungsanleitung

Panasonic

Panasonic KX-TGA648EX Bedienungsanleitung

Panasonic

Panasonic KX-TGA551EX Bedienungsanleitung

Panasonic

Panasonic KX-TGFA30E Bedienungsanleitung

Panasonic

Panasonic KX-TGA681E Bedienungsanleitung

Panasonic

Panasonic KXTGA935 - DIGITAL CORDLESS HANDSET INSTALL Bedienungsanleitung

Panasonic

Panasonic KX-TGMA44C Bedienungsanleitung

Panasonic

Panasonic KX-TWA50EX Bedienungsanleitung

Panasonic

Panasonic KX-TGP600G Bedienungsanleitung

Panasonic

Panasonic KX-TGMA44 Bedienungsanleitung

Panasonic

Panasonic KX-TGA271B Bedienungsanleitung

Panasonic

Panasonic KX-TG5200C Bedienungsanleitung

Panasonic

Panasonic KX-TGA659 Bedienungsanleitung

Panasonic

Panasonic KX-TG6311 Bedienungsanleitung

Panasonic

Panasonic KX-TGDA30E Bedienungsanleitung

Panasonic

Panasonic KX-TGA800FX Bedienungsanleitung

Panasonic

Panasonic VL-WD613 Bedienungsanleitung

Panasonic

Panasonic KX-TGFA30EX Bedienungsanleitung

Beliebte Mobilteil Handbücher anderer Marken

Swissvoice

Swissvoice ePure HD Bedienungsanleitung

Philips

Philips TD6736/BH051P Bedienungsanleitung

ASCOM

ASCOM I62 - Bedienungsanleitung

LG-Ericsson

LG-Ericsson LIP-9010 Bedienungsanleitung

GE 1583 Bedienungsanleitung

iiNet

iiNet Handset Bedienungsanleitung

ASCOM

ASCOM 9p23 Bedienungsanleitung

AT&T

AT&T DLP70110 Bedienungsanleitung

AirCell

AirCell ST 3100 Bedienungsanleitung

Eaton

Eaton HHIR-LCD-PROG Montageanleitung

Mitel

Mitel 112 Bedienungsanleitung

SBC

SBC SBC-381H Bedienungsanleitung

Mitel

Mitel 5602 Bedienungsanleitung

ASCOM

ASCOM d81 Messenger Montageanleitung

SpectraLink

SpectraLink 7522 Bedienungsanleitung

Avaya

Avaya L100 Series Anleitung zur Verwendung

ooma

ooma HD2 Handset Bedienungsanleitung

Yealink

Yealink IPW56 Bedienungsanleitung