Panasonic EY7546 Bedienungsanleitung

© Panasonic Electric Works Co., Ltd. 2011.

All rights reserved. Unauthorized copying and distri-

bution is a violation of law.

Order Number PTD1103X37CE

Cordless Impact Driver / Cordless Impact Wrench

Model No. EY7546

EY7550

(Cordless Impact

Driver)

Model No. EY7547

EY7551

(Cordless Impact

Wrench)

Europe and Oceania

TABLE OF CONTENTS PAGE PAGE

1 Warning-------------------------------------------------------------- 2

2 Specifications ----------------------------------------------------- 2

3 Troubleshooting Guide----------------------------------------- 3

4 Disassembly and Assembly Instructions ---------------- 7

5 Wiring Connection Diagram ---------------------------------13

6 Schematic Diagram---------------------------------------------13

7 Exploded View and Replacement Parts List -----------14

2

1Warning

Caution:

• Pb free solder has a higher melting point that standard solder; Typically the melting point is 50 - 70°F (30 - 40°C) higher. Please

use a soldering iron with temperature control and adjust it to 750 ± 20°F (400 ± 10°C). In case of using high temperature solder-

ing iron, please be careful not to heat too long.

• Pb free solder will tend to splash when heated too high (about 1100°F / 600°C).

2 Specifications

2.1. MAIN UNIT

2.2. MAXIMUM RECOMMENDED CAPACITIES

3

3 Troubleshooting Guide

3.1. Troubleshooting Guide(Refer to Wiring Connection Diagram)

4

5

6

3.2. Trial Operation (after checking Troubleshooting Guide.)

3.2.1. ASSEMBLY

1. Confirm if there is NO gap between Housing A and B by pinching the lead wires.

2. Confirm all screws are tightened firmly.

3. There should be no metallic sound and abnormal sound.

4. There is no dust or deformation on battery terminals.

5. Confirm if there is no dirt when repairing.

3.2.2. OPERATION

1. Confirm the forward and reverse side of rotation.

2. Confirm if LED rights ON. Once battery pack is removed and attached, press the switch handle, otherwise LED does not right

ON.

3. Confirm the rotation of speed if it changes in proportion to the amount of pushing level on switch handle.

4. Confirm if the rotation stops when releasing the switch handle.

5. Confirm the smooth movement of the bit holder.

6. Confirm the impact operation.

7

4 Disassembly and Assembly Instructions

Ref. No. 1A Procedure 1A Removal of Housing.

1. Loosen a screw.

2. Take out the plate hook.

3. Remove nine housing screws.

8

Ref. No. 1B Procedure 1A →1B Removal of Motor assembly and Driving shaftassembly..

1. Take out the motor assembly with the driving shaft assembly from

the housing.

2. Separate the motor assembly from the driving shaft assembly with

holding the motor mounting plate.

3. Pull off the fixation cover assembly.

9

Ref. No. 1C Procedure 1A →1B→1C Removal of Battery terminal base assembly.

1. Hold the switch and the battery terminal base assembly.

2. Pull out the quick-connect terminal by something like the stop ring

removal pliers.

NOTE:

Make sure to pull out straight away.

Ref. No. 1D Procedure 1A →1B →1C →1D Removal or attachment of FPC.

(Removal)

1. Slightly pull up the connector.

NOTE:

Connector is not able to remove from the control PCB.

2. Pull out FPC.

NOTE:

Make sure to handle FPC gently in order to avoid the breakage.

(Attachment)

1. Apply the grease on the places where insert into the connectors.

10

Ref. No. 1E Procedure 1A →1B →1C→1D →1E Removal or assembly of module assembly.

(Removal)

1. Pull out the connector from the module assembly.

NOTE:

Make sure hold the connector at the bottom area.

(Attachment)

1. Apply the permalub grease around the tact switch and connectors.

NOTE:

Make sure to apply the grease to keep IP56.

2. Insert the connector firmly.

Dieses Handbuch passt für folgende Modelle

3

Inhaltsverzeichnis

Andere Panasonic Impact Driver Handbücher

Panasonic

Panasonic EY75A1 Bedienungsanleitung

Panasonic

Panasonic EY75A7X57 Bedienungsanleitung

Panasonic

Panasonic EY7270 Bedienungsanleitung

Panasonic

Panasonic EYFLA3J - DRILL - MULTI LANGUAGE Bedienungsanleitung

Panasonic

Panasonic EY7270-X8 Bedienungsanleitung

Panasonic

Panasonic EY7206 - 12V IMPACT DRIVER Bedienungsanleitung

Panasonic

Panasonic EY7552 Bedienungsanleitung

Panasonic

Panasonic EY7206GQW Bedienungsanleitung

Panasonic

Panasonic EYFLA1A - DRILL - MULTI LANGUAGE Bedienungsanleitung

Panasonic

Panasonic EY6506-U1 Bedienungsanleitung

Panasonic

Panasonic EYF581-U1 Bedienungsanleitung

Panasonic

Panasonic EY7540 - IMPACT DRIVER 14.4V Bedienungsanleitung

Panasonic

Panasonic EY75A1 Bedienungsanleitung

Panasonic

Panasonic EY75A7 Bedienungsanleitung

Panasonic

Panasonic EYFLB1A Bedienungsanleitung

Panasonic

Panasonic EYFLF1XC Bedienungsanleitung

Panasonic

Panasonic EY-6506 Bedienungsanleitung

Panasonic

Panasonic EY7201 - 12V IMPACT Bedienungsanleitung

Panasonic

Panasonic EY7202 - 12V IMPACT DRIVER Bedienungsanleitung

Panasonic

Panasonic EY75A2 Bedienungsanleitung

Panasonic

Panasonic EYFMA2CR Bedienungsanleitung

Panasonic

Panasonic EYFLA7A Bedienungsanleitung

Panasonic

Panasonic EY7542 - CORDLESS IMPACT WRENCH Bedienungsanleitung

Panasonic

Panasonic EY75A1 Bedienungsanleitung

Beliebte Impact Driver Handbücher anderer Marken

stayer

stayer IW500D Bedienungsanleitung

Makita

Makita DTD152 Bedienungsanleitung

Milwaukee

Milwaukee M12 FID Bedienungsanleitung

Grizzly

Grizzly H6140 Bedienungsanleitung

Makita

Makita BTW450 Bedienungsanleitung

Ozito

Ozito LID-3000 Bedienungsanleitung

Astro Pneumatic Tool

Astro Pneumatic Tool 1812 Bedienungsanleitung

Greenlee

Greenlee HW3 Bedienungsanleitung

Sthor

Sthor 57091 Bedienungsanleitung

Makita

Makita DTD145 Bedienungsanleitung

Hilti

Hilti SIW 2-A12 Bedienungsanleitung

Ryobi

Ryobi R18IW3 Bedienungsanleitung

Parkside

Parkside PDSSA 20-Li A1 Bedienungsanleitung

Flex

Flex FX1471 Bedienungsanleitung

SATA

SATA 51075C Technisches Handbuch

Cembre

Cembre NR-11P Bedienungsanleitung

Makita

Makita BTP131RFE Bedienungsanleitung

DeWalt

DeWalt XR Li-ion DCF902 Bedienungsanleitung