Panasonic EY75A1 Bedienungsanleitung

distribution is a violation of law.

Order Number PTD1211X10CE

Cordless Impact Driver

Model No. EY75A1

Europe

Oceania

TABLE OF CONTENTS

PAGE PAGE

1 Warning -------------------------------------------------------------- 2

2 Specifications ----------------------------------------------------- 2

3 Troubleshooting Guide ----------------------------------------- 3

4 Disassembly and Assembly Instructions ---------------- 7

5 Wiring Connection Diagram ---------------------------------12

6 Schematic Diagram ---------------------------------------------12

7 Exploded View and Replacement Parts List -----------13

1Warning

Caution:

• Pb free solder has a higher melting point that standard solder; Typically the melting point is 50 - 70°F (30 - 40°C) higher. Please

use a soldering iron with temperature control and adjust it to 750 ± 20°F (400 ± 10°C). In case of using high temperature solder-

ing iron, please be careful not to heat too long.

• Pb free solder will tend to splash when heated too high (about 1100°F / 600°C).

2 Specifications

3 Troubleshooting Guide

3.1. Troubleshooting Guide (Refer to Wiring Connection Diagram)

3.2. Trial Operation (after checking Troubleshooting Guide)

3.2.1. Assembly

• Confirm if there is no gap between housing A and B by pinching lead wires.

• There is no dust or deformation on battery terminals.

• Confirm if there is no dirt when repairing.

3.2.2. Operation

• Check whether the tool operates properly in both the forward and reveres directions.

• Check whether the LED light turns on and off each time the LED light on/off button is depressed.

• Check whether the tool speed increases continuously as the trigger is gradually engaged.

• Check whether the tool speed is normal after repair and reassembly.

High mode: 0 to 2,500 rpm

Medium mode: 0 to 1,400 rpm

Low mode: 0 to 1,000 rpm

• Check whether the bit holder slides properly. Insert a bit and verify that it cannot be removed by lightly pulling on it.

• Check whether impact operation functions properly.

For an easy test of impact operation, check whether you can drill a universal screw (φ4.5X75mm) into a substrate Douglas fir

within about 5 seconds.

3.2.3. Integrity

• With the switch activated, shake the tool back and forth and up and down and verify that its sound does not change excessively.

• Check for the presence of any dirt or foreign matter from the repair process on the outside of the tool.

4 Disassembly and Assembly Instructions

*To assemble the tool, start with 4-6 and proceed to 4-1

4.1. How to remove the housing

4.2. Removing the Assemblies

4.3. Removing the Motor Mounting Plate, Driving Shaft Assembly, and Fixa-

tion Cover Assembly from the Motor Assembly

4.4. Removing the Fixation assembly, Driving shaft assembly, and Motor

Mounting Plate

4.5. Removing the Motor Assembly, Switch Assembly, and Module assembly

4.6. Precautions When Assembling the Motor Assembly, Switch Assembly,

and Module Assembly

Andere Handbücher für EY75A1

Inhaltsverzeichnis

Andere Panasonic Impact Driver Handbücher

Panasonic

Panasonic EY7201-U1 Bedienungsanleitung

Panasonic

Panasonic EY7542 - CORDLESS IMPACT WRENCH Bedienungsanleitung

Panasonic

Panasonic EYFLA3J - DRILL - MULTI LANGUAGE Bedienungsanleitung

Panasonic

Panasonic EY6588 Bedienungsanleitung

Panasonic

Panasonic EY7540 - IMPACT DRIVER 14.4V Bedienungsanleitung

Panasonic

Panasonic EY75A7 Bedienungsanleitung

Panasonic

Panasonic EY75A7 Bedienungsanleitung

Panasonic

Panasonic EY7552 Bedienungsanleitung

Panasonic

Panasonic EYFLA4A Bedienungsanleitung

Panasonic

Panasonic EY7530 Bedienungsanleitung

Panasonic

Panasonic EY7270-X8 Bedienungsanleitung

Panasonic

Panasonic EY75A2 Bedienungsanleitung

Panasonic

Panasonic EY75A1X Bedienungsanleitung

Panasonic

Panasonic EYFPA1J Bedienungsanleitung

Panasonic

Panasonic EY7202 - 12V IMPACT DRIVER Bedienungsanleitung

Panasonic

Panasonic EY7271 Bedienungsanleitung

Panasonic

Panasonic EY75A1 Bedienungsanleitung

Panasonic

Panasonic EY7542 - CORDLESS IMPACT WRENCH Bedienungsanleitung

Panasonic

Panasonic EYFMA2CR Bedienungsanleitung

Panasonic

Panasonic EYFLA7A Bedienungsanleitung

Panasonic

Panasonic EY7546LR2S Bedienungsanleitung

Panasonic

Panasonic EY7206 - 12V IMPACT DRIVER Bedienungsanleitung

Panasonic

Panasonic EY6506-U1 Bedienungsanleitung

Panasonic

Panasonic EY7541 - CORDLESS IMPACT WRENCH Bedienungsanleitung

Beliebte Impact Driver Handbücher anderer Marken

stayer

stayer IW500D Bedienungsanleitung

Makita

Makita DTD152 Bedienungsanleitung

Milwaukee

Milwaukee M12 FID Bedienungsanleitung

Grizzly

Grizzly H6140 Bedienungsanleitung

Makita

Makita BTW450 Bedienungsanleitung

Ozito

Ozito LID-3000 Bedienungsanleitung

Astro Pneumatic Tool

Astro Pneumatic Tool 1812 Bedienungsanleitung

Greenlee

Greenlee HW3 Bedienungsanleitung

Sthor

Sthor 57091 Bedienungsanleitung

Makita

Makita DTD145 Bedienungsanleitung

Hilti

Hilti SIW 2-A12 Bedienungsanleitung

Ryobi

Ryobi R18IW3 Bedienungsanleitung

Parkside

Parkside PDSSA 20-Li A1 Bedienungsanleitung

Flex

Flex FX1471 Bedienungsanleitung

SATA

SATA 51075C Technisches Handbuch

Cembre

Cembre NR-11P Bedienungsanleitung

Makita

Makita BTP131RFE Bedienungsanleitung

DeWalt

DeWalt XR Li-ion DCF902 Bedienungsanleitung