Panasonic WV-CF5SA Bedienungsanleitung

Before attempting to connect or install this product,

please read these instructions carefully and save this manual for future use.

The model number is abbreviated in some descriptions in this manual.

Operating Instructions

Included Installation Instructions

Dome Cover

Model No.

WV-CF5SA

Precautions

Mounting procedures

Refer installation work to the dealer.

Installation work requires technique and experience. Failure to observe this may cause fire, electric

shock, injury, or damage to the product.

Be sure to consult the dealer.

Note:

● When a smoke type dome cover is used, the IR LED irradiation distance and the illuminance level

for switching between color and monochrome are lower than for a standard clear type dome

cover. Check the settings after attaching the enclosure.

n Attach to WV-SFN631L/WV-SFN611L

Read the following descriptions together with the Installation Guide of the camera. The WV-SFN631L

is used as an example in these descriptions.

Step1

Remove the enclosure from camera

Use the bit included with the camera to

loosen the 2 screws that secure the

enclosure, and then remove the enclo-

sure from the camera body.

Enclosure fixing

screws (x2)

Enclosure

Camera body

Step2 Remove the dome cover

Remove the screw that secures the dome cover holder

and the enclosure. Rotate the dome cover holder coun-

terclockwise until the dome cover holder can be

removed.

You can remove the dome cover holder, light-blocking

sheet, and dome cover (in this order) once the 3 protru-

sions on the enclosure are lined up with the notched

areas of the dome cover holder. (Do not remove the

case ring.)

The screw, dome cover holder, and light-blocking sheet

will be used again in step 3.

Step3

Replace the dome cover

1 Remove the cover film from the outside of the dome cover (WV-CF5SA). Keep the removed cover

film for future use. (Take care not to damage the outside or inside of the dome cover.)

2 Attach the dome cover (WV-CF5SA) to the enclosure. When attaching, align the 3 notched areas

on the dome cover with the 3 protrusions on the case ring.

3 Attach the light-blocking sheet and dome cover holder removed in step 2 to the dome cover from

the top, and then rotate the dome cover holder clockwise and secure it using the screw from step

2. (The recommended tightening torque: 0.39 N·m {0.29 lbf·ft})

4 Attach the cover film removed in 1 to the surface of the dome cover.

Dome cover holder

Dome cover

Light-blocking sheet

Notched areas on

the dome cover

Case ring

Protrusions on

the case ring Notched areas on the

dome cover, and protru-

sions on the case ring

Protrusions on

the enclosure Screw

Dome cover holder

Step4

Attach the enclosure to the camera

Secure the camera to the enclosure with the 2 enclosure fixing screws.

(The recommended tightening torque of the enclosure fixing screws is 0.59 N·m {0.44 lbf·ft})

⇒ Refer to the Installation Guide for more information about installing the camera.

IMPORTANT:

● When the enclosure is attached, the camera's focus may go out of focus. Use the "Auto focus"

function in the setup menu to adjust the focus.

● Remove the cover film after installation is complete.

● If there are fingerprints or dirt on the dome cover, wipe it clean with a soft cloth.

n Attach to WV-SF538/WV-SF539 and other models

Models that can use the WV-CF5S dome cover can also use the WV-CF5SA dome cover.

Read the following descriptions together with operating instructions of the camera.

Step1

Remove the enclosure from camera

1 Remove the enclosure fixing screw (M3, step screw).

2 Rotate the enclosure counterclockwise twice, align the marker with "OPEN", and then remove the

enclosure.

ADJUST

OPEN

LOCK

Marker

Enclosure

1 Remove the

fixing screw.

Step2

Remove the clear dome cover

1 Remove the inner dome cover and clear dome cover from enclosure's stoppers. The inner dome

cover and clear dome cover can be removed by releasing the stoppers and then pushing the inner

dome cover and clear dome cover into the enclosure.

Stoppers (x3)

Push

2 Remove 1 stopper at a time while pushing down on the inner dome cover.

Step3

Attach the dome cover (WV-CF5SA)

1 Align the inner dome cover's 3 stoppers with notched areas of the dome cover.

2 Insert the dome cover and inner dome cover into the enclosure and make sure that they are stuck

in with the stoppers on the enclosure.

3 Rotate the dome cover and check that the dome cover and inner dome cover rotate smoothly

together.

Inner dome

Stopper

Notched area

Dome cover

Enclosure

Inner dome

Stopper

Dome cover

Enclosure

Step4

Attach the enclosure to the camera

Attach the enclosure to the main body of the camera.

Refer to the operating instructions of each model for information.

Specifications

Standard Accessories

Ambient operating temperature: –10 °C to +50 °C {14 °F to 122 °F}

Mass: Approx. 25.0 g {0.06 lbs}

Dimensions: Diameter: 92 mm {3-5/8 inches}

Height : 49.3 mm {1-15/16 inches}

Diameter of the dome: 40.1 mm {1-9/16 inches}

Operating Instructions .................................... 1 set

For U.S. and Canada:

Panasonic System Communications

Company of North America,

Unit of Panasonic Corporation

of North America

www.panasonic.com/business/

For customer support, call 1.800.528.6747

Two Riverfront Plaza, Newark, NJ 07102-5490

Panasonic Canada Inc.

5770 Ambler Drive, Mississauga,

Ontario, L4W 2T3 Canada

(905)624-5010

www.panasonic.ca

For Europe and other countries:

Panasonic Corporation

http://panasonic.net

Importer's name and address to follow EU rules:

Panasonic Testing Centre

Panasonic Marketing Europe GmbH

Winsbergring 15, 22525 Hamburg, Germany

PGQX1553ZA Cs0214-0

Printed in China

Inhaltsverzeichnis

Andere Panasonic IP-Kamera Handbücher

Panasonic

Panasonic GP-VD131 Bedienungsanleitung

Panasonic

Panasonic AWHE2 Bedienungsanleitung

Panasonic

Panasonic KX-HNC200 Bedienungsanleitung

Panasonic

Panasonic aw-he40 series Bedienungsanleitung

Panasonic

Panasonic WV-CP620/G Series Bedienungsanleitung

Panasonic

Panasonic KX-HNC200 Bedienungsanleitung

Panasonic

Panasonic BL-C10A - Network Camera - Pan Bedienungsanleitung

Panasonic

Panasonic HomeHawk SHELF Bedienungsanleitung

Panasonic

Panasonic CV-CPW203L Bedienungsanleitung

Panasonic

Panasonic AW-HE40HWP Bedienungsanleitung

Panasonic

Panasonic AW-HE100E Bedienungsanleitung

Panasonic

Panasonic AW-HE100E Bedienungsanleitung

Panasonic

Panasonic WV-SFV781L Bedienungsanleitung

Panasonic

Panasonic KX-HN7001 Bedienungsanleitung

Panasonic

Panasonic AW-HR140EJ Bedienungsanleitung

Panasonic

Panasonic AW-HE120WP Bedienungsanleitung

Panasonic

Panasonic WV-SPW631L Bedienungsanleitung

Panasonic

Panasonic OneHome BB-HCM311A Bedienungsanleitung

Panasonic

Panasonic AW-HR140PJ Bedienungsanleitung

Panasonic

Panasonic WV-SW155 Bedienungsanleitung

Panasonic

Panasonic AW-HE130KP Bedienungsanleitung

Panasonic

Panasonic GP-US932CUS Bedienungsanleitung

Panasonic

Panasonic HC-MDH3 Technische Daten

Panasonic

Panasonic KX-VD170 Bedienungsanleitung

Beliebte IP-Kamera Handbücher anderer Marken

FLIR

FLIR Exx series Bedienungsanleitung

Avigilon

Avigilon H4A-BO1-IR Bedienungsanleitung

Digital Watchdog

Digital Watchdog DWCA-C128-64 Bedienungsanleitung

ShareTech

ShareTech AV1 Bedienungsanleitung

Ezviz

Ezviz C6C Bedienungsanleitung

Melchioni

Melchioni UCAM 2015 Bedienungsanleitung

Geutebruck

Geutebruck G-Cam/ESD-4630 Bedienungsanleitung

Arecont Vision

Arecont Vision MegaBall AV3146DN-3310-D-LG Bedienungsanleitung

Mitel

Mitel 6800i Series Service-Handbuch

Vitek

Vitek VTC-IR403-212NP Bedienungsanleitung

THOMSON

THOMSON DSC - 323W Bedienungsanleitung

AVer

AVer FB2027 Bedienungsanleitung

ENFORCER

ENFORCER EV-T5105-N2SQ Bedienungsanleitung

Wansview

Wansview NC543 Bedienungsanleitung

Eneo

Eneo MCB-64A0003M0A Bedienungsanleitung

deView electronics

deView electronics CBDNI36F Bedienungsanleitung

Swann

Swann SwannEye Bedienungsanleitung

LevelOne

LevelOne IP CamSecure Bedienungsanleitung